Measurement & Analysis Instruments Manufacturers and Suppliers
IEC61032Test Probe B Jointed Finger probe key words Test Probe B, Jointed Probe This jointed test probe B is intended to verify the basic protection against access to hazardous parts. It's also used to verify the protection against access with a finger. Conforms to This is the "i
深圳市创鑫仪器有限公司 [2015-09-09 17:18:43 ]
IEC61032 figure 1 IEC Test Probe A Test Pin Key words Iec test probe A, IEC Test Probe, test pin Appliance It's the neccessary tool to proceed protecting electric shock test of household and similar electrical appliances. Purpose This probe is intended to verify the basic protect
深圳市创鑫仪器有限公司 [2015-09-09 16:49:22 ]
Model ET4008 Test Area Volume (L) 80 Temp. Range ( ℃ ) -40/+180 Temp. Fluctuation ( ℃ ) ± 0.1 – ± 0.5 Temp. Uniformity ( ℃ ) ± 0.5 – ± 2.0 Heat Up Rate ( ℃ /min) 3.3 Cool Down Rate ( ℃ /min) 3.0 Test Area Dimension 400*400*500 (W*D*H mm) Exterior Dimension 600*1
中科达力仪器设备有限公司 [2015-09-08 10:24:08 ]
Haiyan Huada Ink Chemical Co.,Ltd is one of the leading China the new ymzs-a-4 ri tester suppliers and manufacturers, as a professional company, we have productive factory. Welcome to wholesale products from us.
Huada Ink [2015-09-07 16:41:37 ]
DVP-730 Single Fiber Fusion Splicer Model DTS-4040 Specifications Applicable fibers SM, MM, DS. NZ-DS, EDF Cladding diameter 100 to 150um Coating diameter 100 to 1000um Fiber cleaved length 8-22mm(standard) Splicing mode Auto & Manual Average splice loss 0.02dB(SM), 0.01dB(MM), 0
Sunflower Commerce Co.,Ltd [2015-09-02 09:49:28 ]
The LS200 Glass Thickness Meter is mainly used on measuring glass and air space in insulated glass (IG), it also can measure individual panes of glass and the thickness of a glass bottle etc, special for those situations where common ruler cannot easily do it. Parameters 1 Dimens
Shenzhen Linshang Technology Co. , Ltd. [2015-08-25 10:59:58 ]
LS210 Digital Glass thickness meter is mainly used on measuring glass and air space in insulated glass (IG), it also can measure individual panes of glass and the thickness of a glass bottle etc, special for those situations where common ruler cannot easily do it. Parameters 1 Di
Shenzhen Linshang Technology Co. , Ltd. [2015-08-25 10:50:46 ]
LS126A is Suited for Radiation intensity measurement of UV light source, such as Ultraviolet curing lamp, Photolithography exposure, integrated circuit photolithography etc. 1. Parameters 1). Accuracy ± 10 % 2). Resolution 0.01 mW/cm2 3). Response Wavelength 320nm-400nm; λp = 3
Shenzhen Linshang Technology Co. , Ltd. [2015-08-25 10:40:11 ]
The ultraviolet band including UVA (320nm-380nm), UVB band (280nm-320nm) and UVC band (200nm-280nm). UVA wave band is mainly used for light curing, UV light exposure lithography, lithography, integrated circuit industry etc.. UVC band, also known as the short wave ultraviolet ste
Shenzhen Linshang Technology Co. , Ltd. [2015-08-24 15:02:37 ]
LS110 is used for the transmittance testing of glass, plated film, organic materials, solar film and other translucent materials such as insulating glass, filmed glass, PMMA materials etc LS110 consist of two parts main part for measuring and displaying functions ; the auxiliary
Shenzhen Linshang Technology Co. , Ltd. [2015-08-24 14:51:26 ]
LS116 light transmittance meter is used for measure percentage of light transmitted through transparent material (such as glass, plastic substrates etc.). This meter is self-contained light sources and self -calibration. No manual adjustment is needed. Parameter 1. Instrument Siz
Shenzhen Linshang Technology Co. , Ltd. [2015-08-24 14:48:05 ]
LS117 optical density meter measures the optical density and light transmittance at the same time, mainly for the following three types of product measurement 1 All graphic arts film, measuring absolute optical density and relative density and dot area 2 X-ray film, aluminum film
Shenzhen Linshang Technology Co. , Ltd. [2015-08-24 13:57:35 ]
LS108H is able to simultaneously measure and display UV, Visible and Infrared transmission values. This meter is self-contained light sources and self -calibration. No adjustment is needed. The users only need plug the power supply, turn on the switch and put the sample in the te
Shenzhen Linshang Technology Co. , Ltd. [2015-08-24 11:52:29 ]
LS108 D is used for testing the transmission value of the mobile phone lens, including IR transmission value at wavelength 940nm and 850nm, VL transmission value at wavelength 550nm. Parameter 1. Size 200mm*180mm*106mm(L*W*H ） 2. Size of Testing sample > ￠ 0.5 mm 3. Weight ab
Shenzhen Linshang Technology Co. , Ltd. [2015-08-24 11:40:48 ]
LS108A is used for testing the transmission value of the mobile phone lens, including IR transmission value at wavelength 940nm and 850nm, VL transmission value at wavelength 550nm. Parameter 1. Size 200mm*180mm*106mm(L*W*H) 2. Size of Testing sample >Diameter 1.0mm 3. Weight abo
Shenzhen Linshang Technology Co. , Ltd. [2015-08-24 11:38:06 ]
LS110A split transmission meter has three independent testing units to measure the transmittance value of ultraviolet light, infrared light, and visible light. It is used for the transmittance testing of glass, plated film, organic materials, solar film and other translucent mate
Shenzhen Linshang Technology Co. , Ltd. [2015-08-24 11:32:07 ]
Feature 1.IR transmission meter, IR power meter, two function in ONE device 2.Evaluating heat-insulating property of the tint of windows, solar films, glass and other transparent materials 3.measuring optical power density of infrared ray, wavelength response (1000nm～1700nm), g
Shenzhen Linshang Technology Co. , Ltd. [2015-08-21 17:43:17 ]
The LS122A is a wide range spectral wavelength power meter. It can be used for measuring the optical power density of infrared ray. It uses optical sensors to take measurements and displays measure result in W/m2. It is used for l a) Evaluating heat-insulating property of the ti
Shenzhen Linshang Technology Co. , Ltd. [2015-08-21 17:35:51 ]
The LS123A Power meter is a wide range spectral wavelength power meter. It can be used for measuring the optical power density of UV light. It is used for a) Evaluating UV Rejection property of the tint of windows, solar films, glass and other transparent materials ; b) M easurin
Shenzhen Linshang Technology Co. , Ltd. [2015-08-21 17:28:03 ]
LS120 can measure the UV energy density , UV irradiance and temperature at the same time. It can be used to 1. Detect the UV energy density, UV irradiance and temperature of UV curing machine. 2. Me asure the UV irradiance and temperature of machines, such as UV drying machine, e
Shenzhen Linshang Technology Co. , Ltd. [2015-08-21 17:19:29 ]
