Model ET4008
Test Area Volume (L) 80
Temp. Range (℃) -40/+180
Temp. Fluctuation (℃) ±0.1 –±0.5
Temp. Uniformity (℃) ±0.5 –±2.0
Heat Up Rate (℃/min) 3.3
Cool Down Rate (℃/min) 3.0
Test Area Dimension 400*400*500
Exterior Dimension 600*1000*1750
(W*D*H mm)
Max. Load (KG) 5
Cooling Methods Air-Cooled
-Intelligent 32bit measuring and control system with colorful screen. Interface USB and Ethernet.
-Programmable power outlet with 4-CH. ON/OFF output control to ensure safety.
-Patented air circulation system improve test’s accuracy.
-Independent thermal protector and sensors keep test specimen off over temperature, breezeless and smog.
-Network video monitoring is synchronized with test data.
-Without defrosting during operating in low temperature.
- Modular fabrication technique.
-APP mobility management.
-Environmental servo refrigerant flow control for energy saving and quick heat-up/cool-down rate.
-Uniquely operation mode makes testing zone’s temperature back to R.T after test, which protects sample status.
-Automatic reminder of maintenance time of equipments and software of fault records.
-Optional remote service function and video CD of equipment operation.
PCT Accelerated Aging Chamber Model: YPCT-035 PCT Accelerated Aging Chamber Main Parameters: Temperature range: 105℃~135℃ Humidity range: 100% RH (Saturated vapor humidity) Pressure range: 0.0kgf/cm2~2.0kgf/cm2 Digital display or program touch screen controller ...
Ozone Test Chambers Model: YOT-080 YOT-150 YOT-1000 Ozone Test Chambers Main Parameters: Ozone concentration: 0~1000 ppm, 0~500 ppm, adjustable Static or dynamic fixtures according to customer\'s product RT+10~80℃ for temperature range, adjustable Comply with JIS K 6259 ...
Model: YSRT-1000 Main Parameters: Comply with IEC-60529 IPx6k, JISD 0203 & US military standards Water pressure circulation test Waterproof plug, suitable for sample power on test IPX6K in one chamber or separately install in one room Description of Ipx6k waterproof chamber. ...
Many industrial products are exposed to several atmospherical agents in addition to the well-known temperature, humidity and corrosion. Very high degradation phenomena are caused by sand, dust and rain. In particular, many electrical components have to be permanently water- ...
Temperature Altitude Chamber Model: YCTL-080 YCTL-150 YCTL-225 YCTL-408 YCTL-800 YCTL-1000 Main Parameters: Temperature range: 0℃/-20℃/-40℃/-70℃ ~ +150 Pressure range: RP~ 0.5Kpa Temperature fluctuation: +/- 0.5℃(normal pressure) Temperature uniformity: +/- ...
Dust Proof Test Chamber Model: YSDT-500-C YSDT-1000-C YSDT-1500-C Main Parameters: Comply with IEC-60529 IP5X IP6X, JISD 0207 & US military standards Top-down, top dusting mode and bottom-up, bottom dusting mode Uniform synchronous air hammer vibration dust device Dust ...
Corrosion tests are carried out to check the resistance of a material or a coating to the corrosion process which is triggered naturally with the reaction (chemical or electrochemical) to the aggression of oxidizing agents such as, for example, atmospheric oxygen, moisture, ...
Constant Temperature Humidity Chamber Constant temperature test chamber simulates a full range of temperature and humidity conditions. Temperatures range as low as -73°C with high temperatures to +180°C and humidity ranges from 10% to 98% RH. used when constant climate ...
Model: YTAT-101 | YTAT-216 Main Parameters: Temperature range: RT+25℃~200℃(300℃) Temperature fluctuation: ±0.3C Temperature resolution: 0.1℃ Air ventilation volume: 5-200 (3-250) time/H Heating time: 45 min N=3590(X-Y)x2/V · ∆ f · D Digital display or program ...
Model: YTAT-101 | YTAT-216 Main Parameters: Temperature range: RT+25℃~200℃(300℃) Temperature fluctuation: ±0.3C Temperature resolution: 0.1℃ Air ventilation volume: 5-200 (3-250) time/H Heating time: 45 min N=3590(X-Y)x2/V · ∆ f · D Digital display or program ...