Fast Ethernet over 16E1 Enhanced Protocol Convertor

Overview

BD-16E1-4ETH-EN is Fast Ethernet over 16-port E1 protocol convertor. Ethernet traffic over E1 lines is transferred to the packet-switched network via the unit’s Fast Ethernet ports. The encapsulation method support GFP.

Features

• Built-in intelligent switch fabric and provide 4-port fast Ethernet
• Support 2047 bytes frames Up to 2K MAC address entries  
• Support IEEE802.1Q VLAN and QinQ double tagging
• Support GFP encapsulation
• Support E1 frame or un-frame application
• Provide statistics for each E1 channel
• Configure via CLI/Web/SNMP (v1/v2c)
• Support software and firmware upgrade

Specifications

E1 Interface

l  Number of Ports: 16

l  Interface Standard:

120 Ω, balanced, RJ-45

75Ω, unbalanced, BNC

l  Data Rate and Line Code:2.048 Mb/s , HDB3

l  Line Protection:

15 KV ESD protections

6KV/42Ω surge protection 

Ethernet Interface

l  Number of Ports:

RJ45:2

SFP:2

l  Type: 10/100 Mbps, auto-negotiation, full/half duplex, flow control, MDI/MDX crossover

l  Compliance: Relevant sections of IEEE 802.3

l  Max Frame Size : 2047 bytes

l  Connector and Electrical Cable Type: RJ-45 and SFP

l  Line Protection:

Built-in 1.5 KV Magnetic Isolation Protection

6KV/42Ω

Encapsulation Protocols

l  GFP-F(

l  LCAS (ITU-T G.7042)

Internal Bridge

l  Number of VLANs : Up to 16

l  Compliance: Relevant sections of 802.1Q and QinQ double tagging

l  LAN Table:  Up to 2K MAC addresses (learned)

Management Ports

l  Console Port

Interface standard: RS-232

Connector: RJ-45

Data rate: 115.2 kbps

Physical Characteristics

l  Housing: Metal

l  Dimensions:

C6008/C6016: 430 x 200 x 43.5mm (Standard 1U and 19-inch rack mount size)

l  Weight: 

C6008: 2.3kg

C6016: 2.7kg