The 4 E1 to ethernet converter is the IP ethernet over TDM converter, which supports the conversion from MAC frames to 1 – 4 E1 lines. The maximum bit rate is 7.8Mbps (4E1 lines). The 4E1 converter not only provides alarms and status of the E1 line but also Ethernet interface together with advanced management functions, such as, throughput statistic of the Ethernet, but also supports the Unification Network Management via SNMP and GUI .
Compliant to international standards, the device can communicate with products from other manufacturers adopting the same standards.
Application:
GUI Management Screen
PLC/Modbus Gateway BL102 Downstream supports: Siemens, Mitsubishi, OMRON, Allen-Bradley, Schneider PLCs. Upstream supports: Modbus TCP, Modbus Cloud and ...
Overview: As a cost effective solution for the traditional telecom services migrate to the IP packet networking technology, BD-E1-IP adopts the innovative TDM over IP technology, it transports the legacy E1/T1 data through the existing Ethernet or IP network ...
Overview The 4E1-4ETH Protocol Converters (Ethernet over TDM) are capable to support four network devices or other devices for remote centralized management. Remote users can perform centralized management for 4E1-4ETH series devices by Telnet, WEB Server or centralized ...
BD-16E1-4ETH-CON is 16E1 to 4 ethernet convergence protocol converter, which is multi-E1 convergency type bridge communication equipement. The device can be used as 16E1 to 4FE access gateway. The convergence converter’s bandwidth can be divided into 1~16channels according to ...
Overview The 8E1 to ethernet converter is the IP ethernet over TDM converter, which supports the conversion from MAC frames to 1 ?8 E1 lines. The maximum bit rate is 15.8Mbps (8E1 lines). The 8E1 converter not only provides alarms and status of the E1 line but also ...
Overview The 8E1 to ethernet converter is the IP ethernet over TDM converter, which supports the conversion from MAC frames to 1 ?8 E1 lines. The maximum bit rate is 15.8Mbps (8E1 lines). The 8E1 converter not only provides alarms and status of the E1 line but also ...
E1 to Ethernet and RS232 converter could Plugging directly into the 10/100Base-T port of a hub or LAN switch, the E1 to Ethernet converter provides FE1 access at connection data rates of 2.048 Mbps, or nx64 (n=1 to 32 channels). The E1 to Ethernet and RS232 converter ...
Functions: .16E1-10/100/1000M Gigabit Ethernet interface converter used back multiplexing technology, transfer 10/100/1000M Ethernet data by using multi E1 channels. Realize convert between 1 to 16E1 channels and Ethernet interface. It can transmit signal of E1 channel to RJ45 ...
Overview BD-2E1-2ETH-CON is multiservice node ring network system equipment is the highly integrated access devices with the bandwidth share function. The 2E1 device can realize two RS-232/485 and 2 Ethernet over 2 channel E1 aggregation transmission. The Ethernet interfaces in ...