1.Copper heat pipes for rapid heat transfer 2.Easy plug-in installation 3.Maintenance Free 4.Suitable for mains pressure water (up to 8 bar/116psi) 5.Corrosion resistant silver brazed copper header 6.All stainless steel frame (304 2B grade SS) 7.Powder coated (black or silver) al
Jiangsu Sunpower Solar Technology Co.,Ltd [2017-06-23 16:58:59 ]
Split solar collector how It Works The operation of the solar collector is very simple. 1. Solar Absorption Solar radiation is absorbed by the solar tubes and converted into heat. 2. Solar Heat Transfer Heat pipes conduct the heat from within the solar tube up to the header pipe.
Jiangsu Sunpower Solar Technology Co.,Ltd [2017-06-23 16:51:21 ]
1)It is suitable for the flat roof and the slope roof. 2)The support material Aluminum alloy or stainless steel 3)Manifold Casing Material Stainless steel or Aluminum 4)Insulation Rockwool 5)Hail resistance 25mm 6)Heat-pipe vacuum tube Three target tube with the SS-C/CU selective
Jiangsu Sunpower Solar Technology Co.,Ltd [2017-06-23 16:49:15 ]
U pipe solar collector SPU Model Name SPU18 Manifold casing material Anodized aluminum (2.5-3mm) Frame material Anodized profiled aluminum bar(2.5-3mm) Header pipe material Copper U pipe material Copper U pipe diameter 8mm No. Of pipes 18 Aperture area 2.3m2 Insulation Rock wool
Jiangsu Sunpower Solar Technology Co.,Ltd [2017-06-23 16:46:45 ]
Technical Specifications 1. Inner and outside water tank shell all are made of SUS3042B food grade stainless steel plates, welded by argon arc. Water is pure and drinkable. 2. Heat insulation of water tanks adopts polyurethane foam, thickness is 55mm. Silicon rings to connect and
Jiangsu Sunpower Solar Technology Co.,Ltd [2017-06-23 16:40:16 ]
Separate Flat Plate System Petrol and electric may cheap, of course may expensive someday, but non-sustainable in any way. However, with sun, charge you nothing. And with Sunpower, we together build a green world.
Jiangsu Sunpower Solar Technology Co.,Ltd [2017-06-23 16:37:16 ]
Material Copper and aluminum complex solar collector Copper and aluminum complex solar collector Outer treatment Blue titanium sputtering Black chrome ConStructure Pipe-sheet Pipe-sheet Flat plate weight 5.7± 0.1KG 5.3± 0.1KG Absorption rate 0.95-0.97 0.93-0.95 Emission rate 0.
Jiangsu Sunpower Solar Technology Co.,Ltd [2017-06-23 16:32:22 ]
Certification(s) CE, ISO9001, CCC, EN12975, Solar Keymark Solar water heater Specifications 1) Inner tank material SUS304-2B, thickness 0.4mm 2) Vacuum tube 15, 16, 18, 20, 24 and 30 pieces of tubes are available 3) Insulating layer Polyurethane foam, thickness 55mm 4) Hail resis
Jiangsu Sunpower Solar Technology Co.,Ltd [2017-06-23 16:30:07 ]
This solar water heater has passed SRCC, CE, ISO9001 2000, CCC, solar Keymark, SABS and other certification. The features of solar water heater 1) Outer tank material SUS304 2B stainless steel plate or Colour steel. 2) Inner tank material SUS304 BA food grade stainless steel plat
Jiangsu Sunpower Solar Technology Co.,Ltd [2017-06-23 16:26:17 ]
Zhejiang Chasing Technology Co.,Ltd
Zhejiang Chasing Technology Co.,Ltd [2017-06-15 09:59:50 ]
Solar Square Lamp Solar Plaza Light Battery LiFePO4 Battery PACK,12V Solar battery pack 1.Much lighter weight than lead acid battery,1/3 or 1/2 weight, half or smaller size. 2. Longest cycle life, 1500 times, 3~6 times longer life than lead acid battery 3. Higher energy density,
Shenzhen Mushang Electronics Co., Ltd. [2017-05-24 17:20:22 ]
Solar Energy Lamp Street Light/lighting Smart Controller Light control+Time control Solar controller 3.7V/7.4V/11.1V, 2A ( Lithium Battery) Output loads one output loads Current 3A/5A No-load current below 0.05mA Environment Temperature -15~60℃ Humidity 10%~95% Case Customized
Shenzhen Mushang Electronics Co., Ltd. [2017-05-24 17:19:29 ]
NCM Li-ion Battery, Solar Street Lamp Battery NCM Li-ion Battery Solar Street Lamp Battery (1) Output with high efficiency Standard discharge current is 1C, instant impulse discharge current is 5C. (2) Good performance under high temperature, it could work under 65°C temperature
Shenzhen Mushang Electronics Co., Ltd. [2017-05-24 17:18:35 ]
NCM Lithium Battery 3.7V 37Ah For Ev/ Storage,Solar Power System Battery (1) Output with high efficiency Standard discharge current is 1C, instant impulse discharge current is 5C. (2) Good performance under high temperature, it could work under 65°C temperature The battery struc
Shenzhen Mushang Electronics Co., Ltd. [2017-05-24 17:17:28 ]
3.2V10Ah LiFePO4 Battery Cell for Solar Street Light System Solar Street Light Battery (1) Output with high efficiency Standard discharge current is 1C, instant impulse discharge current is 5C. (2) Good performance under high temperature, it could work under 65°C temperature The
Shenzhen Mushang Electronics Co., Ltd. [2017-05-24 17:11:34 ]
Product application It can be used for many heat transfer system that the fuel oil , gas or electricity to heat transfer , heat transfer thermal fluid disease to use point. It suitable for the following heat transfer system of open and closed forced circulation.(the highest avera
SKALN LUBRICANT OIL [2017-05-24 14:48:49 ]
Product parameter SKALN Transformer Super insulating oil GXI Iterm 45 Test method Density,(20℃),kg/m3 878.9 GB/T1884 Knematic viscosity,mm2/s,40℃ 8.606 GB/T265 Pour point, ℃ GB/T3535 Flash point(open cup), ℃ 144 GB/T261 neutralization value,mgKOH/G GB/T264 breakdown volta
SKALN LUBRICANT OIL [2017-05-23 14:26:24 ]
Quick Details Place of Origin Shanghai, China (Mainland) Brand Name SKALN Application Industrial Lubricant Type Lubricant Specification SAE General Composition Anti-wear Model Number 320# 32# Product name Lubricant For Grinding Machine Other name Heat Transfer Oil Appearance Oily
SKALN LUBRICANT OIL [2017-05-18 09:55:30 ]
Petroleum Coke Back fill is designed for use in critical deep well or conventional ground bed. The back fill lowers anode-to-earth resistance, provides a uniform environment for current discharge, and extend the anode\'s design life. Deyuan supplies the superior choice for back f
ZIBO DEYUAN METAL MATERIAL CO., LTD. [2017-05-17 10:35:03 ]
Extruded Magnesium Anodes are usually used in a small diameter anodes requirement, such as for water heaters, boilers, water storage tanks, heat plumbing, gas stations CP systems. We also take customers’ requirements order. 1,We have cooperated with many well-known company all
ZIBO DEYUAN METAL MATERIAL CO., LTD. [2017-05-17 10:16:28 ]
