RF Remote Control Subsystems CS-04R4 (CE)

2. Each model can be independently programmed to set the relay output mode as follows:
    A. Pulse mode: The activated relay will be closed for 2 seconds for each activation.
    B. Sustaining (momentary) mode: The activated relay will be closed for as long as the transmitter button is held down.
    C. Latch (toggle) mode: Push the transmitters button to turn the lamp or the appliance on.
    D. A second press of the button will turn the device off.
3. Approval: CE.

    CS-04R4-DC: Using 12V DC.
    CS-04R4-AC: Using 24V AC.

1. Power requirements:

Spec. is as under :

1. This is an RF remote control subsystem with 2-button transmitters and a receiver with 4 relays.
2. Self code learning compatible up to 255 pieces transmitters per system.
3. Major applications are for:
   *Garage opener.
   *Trunk release.
   *Fuel door release.
   *Lighting and air suspension remote control.
   *You can also use this as a general-purpose remote control system to control devices around your home, your car or rv for hobby projects.

This is an RF remote control subsystem with 2-button transmitters and a receiver with 4 relays. CE approved.