e1 converter (E1 to V35 Converter)bnc to v.35

Product function: E1/V.35 (provides conversion between E1 and V.35 interface)
Product introduction:E1/ V.35 converter provides physical level conversion between ITU-T G.703 standard E1 interface and standard V.35 interface, it can receive synchronous 2.048 Mbps data from E1channal and transmit the data to router, DDN, multiplexer or other equipment, thus providing secure and seamless communicating connection between equipments with different interfaces in the network. It is widely applied in the interface between WAN and LAN and in video monitoring. The pattern of data interface is DCE, which can be connected with DTE or DCE equipment.

Technical data:
    E1 interface:     
Interface standard: Conforms to G.703 standard
Interface rate: 2.048Mbit/S50ppm
Vibration characteristic: Satisfies G.742 and G.823 standard
Transmission capacity: 1*E1
Clock type: internal-clock, route clock
Connecter: BNC (75 ohm), RJ45 (120 ohm)
Interface impedance: 75ohm (non- balanced), 120ohm (balanced)
    Working condition
Input voltage: AC220V; DC-48V;
Power consumption: <=5W
Operating temperature:  0C ~ 50C
Storing temperature: -40C ~ +70C
Relative humidity: 95 %
Ordering information:
E1-V35/AC           E1-V35/V24 converter, 75ohm, 120 ohm, 220V
E1-V35/ DC48         E1/V35/V24 converter, 75 ohm, 120 ohm, DC-48V
Packing information   
E1/V35/V24 interface converter    1      
BNC connector (male)           2      
E1/V35/V24 users manual       1      
DB25-M34 wire                1

e1 converter

e1 converter
,G.703 standard E1 interface and standard V.35 interface converter,can be connected with DTE or DCE equipme