Supplier: Chengdu Sooyee Intelligent Technology Co., Ltd.

Contact the supplier to confirm specifications, minimum order, sample availability and lead time.

https://www.hitsooyee.com/Welding-machine-WSM400-WSM500.html

Installation Precautions
>Input voltage: 3~380VAC±10%, 50/60Hz
>Input cable: ≥6mm², length≤10m
>Distribution switch: 63A
>Output cable: 50mm², Welding torch length≤15m
>Ambient temperature: -10℃~+40℃
>Use environment: The air inlet can not be blocked, no direct sunlight exposure, pay attention to dust
>Cylinder installation: fixed firmly, avoid collision, place in a cool place, do not expose to the sun

Features of Welding machine WSM400-WSM500

>Advanced IGBT module inverter technology, beautiful shape

>With manual welding, constant current argon arc welding, pulse argon arc welding functions

>Accurately control the current ramp-up and ramp-down speed to achieve perfect welding

>Light weight, small size, high efficiency and energy saving, high load duration

>Perfect protection circuit and fault display function, safe and reliable

>Adopt all-digital structure, high integration, low failure rate of the whole machine

>Welding process storage and recall function, software upgrade can support special process

>The high-frequency generator adopts special ultra-high-voltage capacitors, which have excellent and reliable high-frequency performance.

>Humanized, beautiful appearance design, more convenient operation

>Three-proof design of key components, suitable for various harsh environments, stable and reliable operation


Product parameters of Welding machine WSM400-WSM500

Product Type

WSM-400

WSM-500

Input Power Source

Three-phase 380V

Three-phase 380V

Rated Input Capacity

13.9KVA

20KVA

Inverting Frequency

20KHZ

20KHZ

No-Load Voltage

70V

74V

Duly Cycle

60%

60%

Voltage Range

10-400A

20-500A

Carbon-point Diameter

2.0-5.0mm

2.0-5.0mm

Efficiency

80%

80%

Insulation Class

Class F

Class F

Dimensions

560X305X530mm

650X335X575mm

Weight

27.5KG

38.2KG

Welding machine external connection diagram


Panel function description of Welding machine WSM400-WSM500


FeaturesAdjustment unitAdjustment rangeDefaults
Air time0.010.01s~5s0.5s
Arc ignition current

1

20A~40A20A
Ramp up time0.010.01s~10s0.5s
Welding current120A~400A100A
Pulse frequency0.1HZ

0.1HZ~1000HZ

1HZ
Duty cycle11%~90%30%
Base current120A~400A20A
Ramp down time0.010.01s~10s0.5s
Arc current120A~100A40A
After air time0.010.01s~60s

2s


lnstructions of Welding machine WSM400-WSM500

Parameter itemFunction Description
Area AA1: gas detection button: switch mode. Press to enter the state of manual gas detection. release to stopA2: Welding mode selection button: Press to select spot welding, non-self-locking and self-locking modes cyclically, valid for argon arc welding
A3: Welding type selection button: press to select one of the three welding forms of \'manual welding\', \'constant current argon arc welding\' and \'pulse argon arc welding\'
Area BB1: Setting button: special panel setting operation button. Press and hold for more than 5s to enter the setting state; after setting, press the setting button again to save the setting data. Power failure is not lost. Behind it is the function status indicator: light up to indicate the current working status of the deviceB2: Digital display table: digital display of parameters. Display current parameter, time parameter and frequency parameter respectively. Followed by the digital display unit indicator light: corresponding to various settings or actual work, the digital display meter displays the corresponding unit display parameters, and the indicator light is on.
Area CC1: Front air indicator, set the advance air timeC2: Arc ignition indicator, set the arc ignition current
C3: Slow rise indicator light, set the rise time from arc ignition current to welding currentC4: Spot welding time indicator, set the duration of spot welding

C5: Current indicator, set preset current and actual current. Peak current during pulse

C6: Duty cycle indicator, set the peak current duty cycle

C7: Frequency indicator, set pulse current frequency

C8: base value/thrust current indicator light, set the pulse base value current size, set the thrust current size during manual arc welding
C9: crater indicator light, set the crater current sizeC10: Slow down indicator light, set the down time from welding current to final arc current
C11: Rear air indicator, set the delayed air supply time
Area DD1: Function encoder, various function selection items when adjusting the corresponding setting stateD2: Current encoder, adjust the parameters of various function items in the corresponding setting state and preset state


Error code of Welding machine WSM400-WSM500

>E01: The air pressure switch is not closed, E02: The water pressure switch is not closed, EO3: The temperature inside the machine is too high

  • Company: Chengdu Sooyee Intelligent Technology Co., Ltd.
  • Country: China (Mainland)
  • Business Type: Manufacturer
  • Address: No.999, Nanyi Road, Chengdu Economic and Technological Development Zone, Chengdu
  • Contact: Anqiyang

Chengdu Sooyee Intelligent Technology Co., Ltd.

Enter between 20 to 3,000 characters. English only. Characters: 0 / 3000
submiting now We do inquire for you, please wait...