BD-ETH-V.35 provides conversion from V.35 to Ethernet, is a good performance, self-study long-distance Ethernet bridge. It is of small volume and low cost and is very suitable for connection application which needs low cost equipment. It can be also used as an extender of LAN.
Features:
◆ completely compatible with IEEE 802.3/EthernetV.2;
◆ WAN circuit interface:V.35,rate auto-adaptable 0~100Mbps;
◆ circuit transmitting agreement:HDLC;
◆ rate of filter and transmitting reaches 15,000frame/s;
◆ 256 frame buffer ;
◆ 10,000 MAC address LAN table ;
◆ auto-study and update function ;
◆ supports DTC and DCE, external clock and internal clock;
Interfaces:
LAN Interface
Rate: 10/100M, full/duplex auto-negotiation
Protocol: Support IEEE 802.3,IEEE 802.1Q (VLAN)
MAC Address Entiries: 4096 Entiries
Total Memory Sizes: 64MBits SDRAM
Physical interface: RJ45, support AUTO-MDIX
V35 port
Interface: compatible with V.35 standard.
Connector: M34 male socket
Connect mode: DCE/DTE
Power supply
working voltage range wide, good
anti-disturb and Isolation, work stable
option I – DC-48V,range DC-36V~DC-72V
option II – AC220V,range AC165V~AC240V
Power Consumption: <=3 Watts
environment condition
Operating temperature: 0C~+50 C
Storage temperature: -20 C~+70 C
Relative temperature:95% (uncondensed)
Application
FAQ:
Question: Are you using PPP as the encapsulation protocol for carrying Ethernet over V.35?
Answer: We do not use PPP encapsulation protocol for our ethernet V35 converter.
Related link:
Qestions about the Ethernet to V.35 converter
BA111 BAS industrial protocol gateway is designed to transmit communications from BACnet devices to Modbus devices for intelligent building management. ⚪Downlink Supports BACnet/IP, BACnet MS/TP, Modbus RTU, Modbus TCP ⚪Uplink Supports Modbus RTU, Modbus TCP ⚪Supports SNMP ...
The BL103 is an industrial gateway with Ethernet ports and RS-232/485 serial ports. BL103 industrial gateway supports Siemens, Mitsubishi, Omron, Delta, and other PLC protocols converting to OPC UA protocol. The PLC to OPC UA industrial gateway supports PLC remote monitoring, ...
Modbus to MQTT Industrial IoT gateways ensure that OT device data is propagated in the cloud for production monitoring. BLIIoT BL101 protocol IoT gateway supports Modbus RTU, Modbus TCP converting to MQTT protocols. ⚪Downlink Supports Modbus RTU Master, Modbus TCP Master, PLC ...
The BL121AC is a protocol translator with Ethernet ports and RS-232/485 serial ports. Beilai BL121AC protocol translator supports Air Conditioning Protocols converting to OPC UA protocol. This protocol translator is used for industrial air conditioning and control system ...
PLC/Modbus Gateway BL102 Downstream supports: Siemens, Mitsubishi, OMRON, Allen-Bradley, Schneider PLCs. Upstream supports: Modbus TCP, Modbus Cloud and ...
INGKE YKJU-8109NL Direct Substitute J1012F21CNL 10/100Base-T RJ45 Ethernet Connector Tab Up with LED Substitute Number:J1012F21CNL Made in China:YKJU-8109NL Supply Ability:5500K-PCS/Month Original Manufacturer:Ingke Technology Packaging:Tray Product Type:Modular Connectors / ...
Overview As a key member of Baudcom “MetroEdge-Express” SDH/MSPP Product family, BD-STM1-TM series terminal multiplexer delivers bonded E1 lines, Ethernet services and V.35 links over legacy SDH networks. Installed at the customer site or directly on STM-1 access ...
Overview: As a cost effective solution for the traditional telecom services migrate to the IP packet networking technology, BD-E1-IP adopts the innovative TDM over IP technology, it transports the legacy E1/T1 data through the existing Ethernet or IP network ...
Overview The 4E1-4ETH Protocol Converters (Ethernet over TDM) are capable to support four network devices or other devices for remote centralized management. Remote users can perform centralized management for 4E1-4ETH series devices by Telnet, WEB Server or centralized ...