Good quality E1 to ethernet converter
Product Quick Detail
- FOB Price
- USD $48.00 / Piece
- Place Of Origin
- China
- Minimum Order
- 1
- Packaging
- 4 pcs a carton
- Delivery
- 3-7day
Specifications
Overview:
BD-E1-ETH is a single port G.703 E1 to Ethernet converter (also called Ethernet over E1 TDM converter,G703 to ethernet converter) that provides high-speed LAN-to-WAN connectivity. Plugging directly into the 10/100Base-T port of a hub or LAN switch, the BD-E1-ETH provides E1 access at connection data rates of 2.048 Mbps. The G703 E1 converter is an excellent choice for internet access as well as LAN-to-LAN services.
The E1 to ethernet converter can support mini desk type case and 19" rack mount type case. The 19" rack mount E1 converter can support double power (two AC or two DC or AC+DC),which strength the operation stability.
Features:
- Ethernet port 10/100M half/full duplex auto-negociation, supporting VLAN.
- Ethernet port interface supports AUTO-MDIX.
- Provides 2 clock types: E1 master clock, E1 line clock.
- Provide LAN auto reset function, run more stably.
- Has the function of pseudo-random code testing, convenient for opening of the circuit, and can be used as an error code instrument.
- Have three LoopBack Modes: E1 interface LoopBack (ANA),LAN interface LoopBack (DIG),command the remote LAN interface LoopBack (REM) .
- E1 port support BNC(75ohm) dual coax and RJ45(120ohm) twisted-pair G.703 connections, and support 75ohm/120ohm adaptive ;
- With abundant presentation function of Ethernet data, can detect real-time data communication status.
- Can realize SNMP management in our chassis installation
| G.703 E1 Interface Line Rate: 2.048Mbps±50ppm Line Code : HDB3 Interface Standard: ITU-T G.703 E1 Impedance : 75ohm(unbalance) and 120ohm(balance) Connections : dual coax and 120ohm twisted-pair (RJ45) | 10/100Base-T Interface Rate: 10/100M, full/duplex auto-negotiation Protocol: Support IEEE 802.3, IEEE 802.1Q (VLAN) MAC Address Entiries: 4096 Entiries Total Memory Sizes: 64MBits SDRAM Physical interface: RJ45, support AUTO-MDIX |
- Country: China (Mainland)
- Business Type:
- Market:
- Founded Year:2006
- Address:Shanghai
- Contact:Cano Cui
You may also like
Other products from SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD
Relate products of Good quality E1 to ethernet converter
Overview The 4 E1 to ethernet converter is the IP ethernet over TDM converter, which supports the conversion from MAC frames to 1 – 4 E1 lines. The maximum bit rate is 7.8Mbps (4E1 lines). The 4E1 converter not only provides alarms and status of the E1 line but also ...
Overview: As a cost effective solution for the traditional telecom services migrate to the IP packet networking technology, BD-E1-IP adopts the innovative TDM over IP technology, it transports the legacy E1/T1 data through the existing Ethernet or IP network ...
Overview The 4E1-4ETH Protocol Converters (Ethernet over TDM) are capable to support four network devices or other devices for remote centralized management. Remote users can perform centralized management for 4E1-4ETH series devices by Telnet, WEB Server or centralized ...
BD-16E1-4ETH-CON is 16E1 to 4 ethernet convergence protocol converter, which is multi-E1 convergency type bridge communication equipement. The device can be used as 16E1 to 4FE access gateway. The convergence converter’s bandwidth can be divided into 1~16channels according to ...
Overview The 8E1 to ethernet converter is the IP ethernet over TDM converter, which supports the conversion from MAC frames to 1 ?8 E1 lines. The maximum bit rate is 15.8Mbps (8E1 lines). The 8E1 converter not only provides alarms and status of the E1 line but also ...
Overview The 8E1 to ethernet converter is the IP ethernet over TDM converter, which supports the conversion from MAC frames to 1 ?8 E1 lines. The maximum bit rate is 15.8Mbps (8E1 lines). The 8E1 converter not only provides alarms and status of the E1 line but also ...
E1 to Ethernet and RS232 converter could Plugging directly into the 10/100Base-T port of a hub or LAN switch, the E1 to Ethernet converter provides FE1 access at connection data rates of 2.048 Mbps, or nx64 (n=1 to 32 channels). The E1 to Ethernet and RS232 converter ...
Functions: .16E1-10/100/1000M Gigabit Ethernet interface converter used back multiplexing technology, transfer 10/100/1000M Ethernet data by using multi E1 channels. Realize convert between 1 to 16E1 channels and Ethernet interface. It can transmit signal of E1 channel to RJ45 ...
Overview BD-2E1-2ETH-CON is multiservice node ring network system equipment is the highly integrated access devices with the bandwidth share function. The 2E1 device can realize two RS-232/485 and 2 Ethernet over 2 channel E1 aggregation transmission. The Ethernet interfaces in ...
PRODUCT CHARACTERISTIC realizes long-distance monitoring of this end equipment to the far-end equipment (two-row indicating lamp, upper row indicating local status, lower row indicating far-end status); based on self-copyright IC; overall rate of V.35 and Ethernet is 1984K, ...
