Measurement & Analysis Instruments Manufacturers and Suppliers
1. With a thickness of only 7.6mm and a width of 44mm, there is no need to worry about being limited by the measurement space. 2. The sampling speed of 2048 times per second provides accurate data for the UV energy meter and can pass and obtain the calibration certificate from Ch
linshangtech [2021-01-19 11:35:58 ]
The LS183 spectrum transmission meter use ultraviolet light source, infrared light source and visible light source to illuminate the tested transparent material. The sensor detects the light intensity of the three light sources and the light intensity after transmitting the teste
linshangtech [2021-01-19 11:33:26 ]
1. Three light sources share a test hole, which can obtain 380nm-760nm visible light transmittance, 940nm infrared and 365nm ultraviolet transmittance in one measurement, easy to operate and save time. 2. Parallel light design, the measurement results of testing large thickness m
linshangtech [2021-01-19 11:25:03 ]
1. The test aperture of this lens transmission meter is 0.5mm. Materials whose size are larger than 0.5mm can be measured. 2. The three light sources share a test hole. Three data can be obtained by measuring for just one time. Easy to operate and save time. 3. The test hole has
linshangtech [2021-01-19 11:21:47 ]
Measurement accuracy ± 0.1mm Measurement range Glass thickness 70mm，air layer thickness 45mm Weight 330g Battery 4 AAA alkaline dry batteries Display 240 * 160 dot matrix LCD Dimension 130mm×72mm×33mm (L*W*H) 1. The digital glass thickness meter can nondestructively test the
linshangtech [2021-01-19 11:18:21 ]
1. The LS200 glass thickness measuring tool has simple operation and fast measurement. The instrument is light and portable. It uses the aser reflection principle, the thickness of glass and air layer can be measured on single side of the glass. 2. Glass thickness and air layer t
linshangtech [2021-01-19 11:14:53 ]
Reference Standard BS EN 12600 2002 Glass in building – Pendulum test – Impact test method and classification for flat glass Technical Data 1) Pneumatic Tyres Impactor Weight 50 kg ± 0.1 kg Tyre pressure 0.35Mpa ± 0.02Mpa Tyre type 3.50-R8 4PR Sample size 876 mm ± 2 mm *
Qinhuangdao Yuanchen Technology Equipment Co., Ltd. [2021-01-08 11:43:19 ]
1. The light transmittance meter adopts the parallel light path of the light source and the light collecting design of the receiver, so that it can measure large thickness materials. 2. Equipped with a fixed base, with two measurement methods; that is, it is suitable for testing
linshangtech [2021-01-04 11:27:41 ]
1. The LS123 UV power meter is suitable for testing the ultraviolet rejection performance of explosion-proof films, automotive insulation films, solar films and insulating glass. 2. It can be used to measure the radiation intensity (ultraviolet power density) of ultraviolet light
linshangtech [2021-01-04 11:22:42 ]
1. The LS122 solar power meter is suitable for testing the infrared rejection performance of architectural film, automobile thermal insulation film, solar film, thermal insulation glass and solar equipment. 2. It can be used to measure the radiation intensity (infrared power dens
linshangtech [2021-01-04 11:19:55 ]
Unilateral temperature measurement accuracy ± 0.5°C Temperature unevenness of double lamps 2°C Temperature measurement range -55°C to + 125°C Temperature test time 1 minute IR peak wavelength 940nm Insulation rate measurement accuracy ± 2% (colorless and uniform trasparent
linshangtech [2021-01-04 11:15:52 ]
1. Using 150W genuine Philips infrared light with better insulation effect. 2. The LS300 solar film temperature meter can simultaneously display the real-time temperature value and the rising temperature difference during the test. You can directly touch the temperature inside th
linshangtech [2021-01-04 11:11:34 ]
Measuring Angle 60° Measurement range 0-1000GU Resolution 0.1GU Repeatability 0-100GU ±0.2 ；100-1000GU ±0.2% reading Reproducibility 0-100GU ±0.5 ；100-1000GU ±0.5% reading Error of indication 0-100GU ±1.5 ；100-1000GU ±1.5% reading Zero error 0.1GU Measuring aperture
linshangtech [2021-01-04 10:54:36 ]
1．Smart statistics As a result of multiple consecutive tests, the LS191 gloss meter can automatically calculate the maximum, minimum, average and mean square error values. After a multi-point test of the material, this function can be used to analyze the uniformity of the teste
linshangtech [2021-01-04 10:52:31 ]
1. LS225 Plating thickness tester parameters Display 240×160 dot matrix LCD Power supply 4pcs of 1.5V AAA alkaline battery Operation temperaturerange 0℃-50℃ Storage temperaturerange -20℃-60℃ Host size 148*76*26 mm (L*W*H) Weight (include battery) 194g 2. N1500 probe para
linshangtech [2021-01-04 10:29:28 ]
1. Dual OLED screens can display data at the same time, which is convenient for reading when measuring the paint film thickness of the car body from different angles. 2. Fast measurement, one measurement can be completed in 0.5s. 3. The use of low temperature resistant OLED scree
linshangtech [2021-01-04 10:26:09 ]
LS131 UV energy meter is a professional instrument for UV LED light source detection. The UV energy meter can detect the power and energy value of UV light source. Spectral range 340nm-420nm, calibrated at 395nm Irradiance measuring range 0-40000mW/cm² Irradiance resolution 1mW/
linshangtech [2020-12-22 11:46:33 ]
Linshang LS130 UV energy meter is a domestic ultraviolet energy meter that can measure UV energy and UV intensity at the same time. Spectral range 315nm-400nm, λp = 365nm Irradiance measuring range 0-2000mW/cm² Irradiance resolution 0.1mW/cm² Energy measuring range 0-999999mJ/
linshangtech [2020-12-22 11:45:20 ]
LS128 UV energy meter is the first professional UV energy meter for testing UV LED light sources in the world. Its spectral response range is 340nm-420nm. It can test various wavelengths of 365nm, 375nm, 385nm, 395nm, 405nm Application Light intensity, energy and temperature meas
linshangtech [2020-12-22 11:43:18 ]
LS120 UV energy meter is widely used in UV exposure, UV adhesive curing, UV ink curing, UV digital printing, optical communication, UV 3D printing and other fields. Application Light intensity, energy and temperature measurement of high pressure mercury lamp Spectral range 315nm
linshangtech [2020-12-22 11:41:11 ]
