Introduction Cone Calorimeter measures heat release rate(H R.R), smoke release, ignition time, oxygen consumption, carbon monoxide and carbon dioxide generation and mass loss rate when specimen is exposed to resource of conical heater. International standards 1. GBT16172 2. ISO 5
chongqing gold co ltd [2017-11-23 11:49:45 ]
Introduction this instrument is designed according to ISO11925-2, it is used to test building material under conditions in the absence of external radiation to direct impact of vertically placed samples with a small flame to determine the flammability of building products. Intern
chongqing gold co ltd [2017-11-23 11:46:38 ]
Introduction Bunched Cable Vertical Flame Spread Tester is used to bundle cable orfiber optic cable to detect vertically mounted under specified conditions forvertical flame spread inhibiting the ability of the instrument, the power cables,control cables, fiber optic cable bundle
chongqing gold co ltd [2017-11-23 11:37:35 ]
Introduction Single wire and cable vertical burning tester is themost widely used and low cost of cable fire performance test equipment; TESTECHsingle wire or cable burning tester meet the national standard GB /T18380.11-2008 / IEC60332-1-1 2004 requiremen. It is to test cable ,
chongqing gold co ltd [2017-11-23 11:28:23 ]
Introduction Full Face Masks Flame Resistance Tester is mainly composed of jacket and bib composition, may also wear fire protective helmets, fire protective boots and fire-protective gloves! Each set must be fitted a serial number of check marks with strong national fire equipme
chongqing gold co ltd [2017-11-23 11:24:09 ]
Features ● Two display modes digital value mode and spectrum mode ● Large memory function 100 x 100 measured results (100 testing points, 100 data can be stored in each testing points), 100 spectrograms (each testing point can store one spectrogram) ● Spectrogram can displa
Beijing TIME High Technology Ltd. [2017-11-08 14:17:01 ]
Features ● Two display modes digital value mode and spectrum mode ● Large memory function 100 x 100 measured results (100 testing points, 100 data can be stored in each testing points), 100 spectrograms (each testing point can store one spectrogram) ● Spectrogram can displa
Beijing TIME High Technology Ltd. [2017-11-08 14:15:39 ]
Features ● Fast flaw detection of motor, electric fan, pump, compressor and machine tools ● Convenient shortcut key combinations for calibration mode ● Memory of 100 groups data ● Upper /lower limits pre-setting and sound alarm ● Integrated with printer to print out all
Beijing TIME High Technology Ltd. [2017-11-08 14:14:35 ]
Features ● Prompt testing of vibration on the workshop machines and fast flaw detection of motor, electric fan, pump, compressor and machine tools to guard against mechanical malfunction ● Quick checking of unbalance misalignment, bearings and gears ● Lightweight Compact si
Beijing TIME High Technology Ltd. [2017-11-08 14:13:27 ]
Features ● Two optional transducers echo-echo transducer and straight transducer ● With the function of echo-echo (E-E) measurement and auto gain control (AGC), thickness of substrate is attainable, even with the cover coating ● Double crystal lemo probe or high frequency s
Beijing TIME High Technology Ltd. [2017-11-08 14:11:38 ]
Features ● Auto recognition of probe ● Dynamic compensation of measurement error caused by probe change and coupling condition ● Real time display coupling condition ● OLED screen with high contrast and brightness suitable to use in sunlight ● Scanning measuring mode, u
Beijing TIME High Technology Ltd. [2017-11-08 14:10:12 ]
Features ● Especially suitable for testing the thin workpieces while keeping high accuracy ● I-E testing mode and E-E testing mode ● Sound velocity testing and single point calibration ● Sound alarm and different modes are available ● Free conversion between metric and
Beijing TIME High Technology Ltd. [2017-11-08 14:09:08 ]
Features ● TIME®2130 Equipped with RS232 interface to connect TA230 printer and PC with optional software. 5PФ10/90° transducer for normal purpose and optional TSTU32 transducer for casting iron. ● TIME®2132 Anti-high-temperature reaching up to 300°C ● TIME®2134 equip
Beijing TIME High Technology Ltd. [2017-11-08 14:07:55 ]
Features ● Free conversion between metric and imperial ● Automatic calibration of zero point automatically correct the system errors ● Automatic non-linear compensation computer software is used to correct the non- linear errors of the probe for the purpose of improving the
Beijing TIME High Technology Ltd. [2017-11-08 14:06:04 ]
Features ● Magnetic induction (F), measuring the thickness of non-magnetic materials (e g. Paint, plastic, porcelain enamel, copper, zinc, aluminum, chrome etc.) on magnetic materials (e g. iron, nickel etc.) . ● Features two working modes DIRECT and BATCH & two measuring way
Beijing TIME High Technology Ltd. [2017-11-08 14:02:18 ]
Features ● Two operation principles are adapted magnetic induction (ferrous) and eddy current (non-ferrous) to take non-destructive measurements ● 6 types of probes are available for different applications ● Features two working modes DIRECT and BATCH& two measuring ways CO
Beijing TIME High Technology Ltd. [2017-11-08 13:48:49 ]
Features ● Economical model with F probe integrated ● Single point measurement mode ● Easy zero point calibration ● 3 kinds of adjustable resolutions for different applications ● High speed data collection ● Automatically switch off ● Easy conversion between mm and
Beijing TIME High Technology Ltd. [2017-11-08 13:47:30 ]
Features ● Two principle of operation are adapted magnetic induction (ferrous) and eddy current (nonferrous) to take non-destructive measurements ● Zero point calibration and two-point calibration to correct the system error of the probe ● Features two working modes DIRECT
Beijing TIME High Technology Ltd. [2017-11-08 13:41:02 ]
The instrument is a super mini-gauge,capable of measuring rapidly, nondestructively and precisely the thickness of insulating coatings on non-magnetic metallic base. The instrument adopts the eddy current principle to measure the thickness of insulating coatings on non-magnetic m
Beijing TIME High Technology Ltd. [2017-11-08 13:38:32 ]
Features ● Magnetic induction (F), measuring the thickness of non-magnetic materials (e g. Paint, plastic, porcelain enamel, copper, zinc, aluminum, chrome etc.) on magnetic materials (e g. iron, nickel etc.). Zero point calibration and two-point calibration to correct the syst
Beijing TIME High Technology Ltd. [2017-11-08 13:32:16 ]
