The main purpose Flammability Tester for Construction Materials is used to detect a variety of building materials and combustion performance measurement and control performance exterior insulation system, with touch-button design, high-voltage electronic ignition system, servo mo
Qinsun Instruments (Shanghai) Co., Ltd. [2018-03-15 14:37:19 ]
Application Scrubbing Resistance Tester can be wiped by the addition of abrasives or detergents for the determination of the washing and scrubbing resistance as well as clean ability of dispersion paints. It is usually applied to Scrub resistance test on interior wall paints, flo
Qinsun Instruments (Shanghai) Co., Ltd. [2018-03-15 14:16:33 ]
Introduction In a fire, people are often smoke suffocated or unable to escape because of the invisible road, so in the prevention of fires, smoke density of the test material is essential. building materials smoke density Tester conforms to the national standard GB/t 8627-2007 sp
chongqing gold co ltd [2018-02-12 11:25:57 ]
Introduction Textiles 45 ° Damaged Area Experimental Device is designed according to the latest edition of the national standard GB/T14645 design and manufacturing; applies to textile fabric in under 45 ° combustion, determination of the damaged area and damage length determina
chongqing gold co ltd [2018-02-01 16:06:18 ]
Introduction To automatically determine the minimum quantity of oxygen required for combustion. The apparatus determines the flammability characteristics of the materials used in the production of electric cables. The oxygen percentage is detected by a paramagnetic transducer (O2
Qinsun Instruments (Shanghai) Co., Ltd. [2018-01-31 10:44:54 ]
The device use needle flame to simulate small flame effect resulted from equipment incorrect operation so as to evaluate fire hazard. Expose the specimen to fire in a certain time. The temperature of the copper block is measured by K-type mineral insulated metal sheathed thermoco
Qinsun Instruments (Shanghai) Co., Ltd. [2018-01-31 10:41:46 ]
The instrument is used to test the pilling conditions of wool fabric, chemical fiber cotton, and blended, knitted, woven fabric to identify product quality and process effect. When testing, the fabric is rubbed against nylon brush and abrasive, or rubbed against abrasive only in
Qinsun Instruments (Shanghai) Co., Ltd. [2018-01-31 10:38:21 ]
This product uses fluorescent UV lamps, combined with temperature and humidity device to simulate the material decline in color, brightness, strength and cracking, spalling, powder, oxidation damage via the high temperature sun light (UV), high humidity, condensation, dark cycle
Qinsun Instruments (Shanghai) Co., Ltd. [2018-01-31 10:35:21 ]
Products meet the standard requirements, which is YY0469-2004 \"Medical surgical mask technical requirements\" and YY 0969-2013 \"Disposable medical masks\", medical face mask air exchange pressure difference tester is measured by gas pressure difference on both sides of the mask
Qinsun Instruments (Shanghai) Co., Ltd. [2018-01-31 10:33:58 ]
Taber oscillation and wear instrument is used to test the transparency of materials and coatings on glass, lenses, and to evaluate the abrasion resistance of organic coatings, plastics, metals and other materials. Standards compliant ASTM F735, ARCA AR-C STP 5.2.5 (Bayer Wear Tes
Qinsun Instruments (Shanghai) Co., Ltd. [2018-01-26 10:39:22 ]
Medical mouth mask flame retardant property tester Standard GB 19083-2010 medical protective mask technical requirements Scope It is the special test equipment mainly used for testing medical masks flame retardant properties. Instrument Description The device is a mask with a hea
Qinsun Instruments (Shanghai) Co., Ltd. [2018-01-26 10:33:53 ]
Standard： ASTM D4329、ASTM D4587、ASTM D4799 、ASTM D5208、ASTM G151、ASTM G154 、EN 927-6、EN 1297 、EN 1898 FIBC、EN 12224 、EN 13523-10 、ISO 4892-1、ISO 4892-3、ISO 11507、ISO 11895 、ISO 11997-2 、SAE J2020、EN 1062-4 Product Advantages： UV aging chamber
Qinsun Instruments (Shanghai) Co., Ltd. [2018-01-26 10:33:02 ]
A cone calorimeter is a fire test apparatus based on the amount of heat released during the combustion process, which is directly related to the oxygen consumption in the combustion process. The amount of heat generated is directly proportional to the severity of the fire, such a
Qinsun Instruments (Shanghai) Co., Ltd. [2018-01-26 10:29:53 ]
Product description Needle flame tester is the needle-shaped burner by a certain size, fill the inside with a specific gas (butane), and at 45 ° angle by fixed time and certain direction to test products, Assess the fire hazard of small flames caused by fault conditions inside t
Qinsun Instruments (Shanghai) Co., Ltd. [2018-01-26 10:28:53 ]
Tracking Index Test Apparatus to Evaluate Leakage Scope of application Tracking index tester to Evaluate Leakage Resistance mainly used for the lighting equipment, low-voltage electrical appliances, household appliances, electrical appliances, electrical machinery, power tools, e
Qinsun Instruments (Shanghai) Co., Ltd. [2018-01-26 10:27:57 ]
Application Mullen burst strength tester is mainly used to determine the bursting strength or bursting strength of seams for the knitted fabrics, knitted fabrics, non-woven fabrics and paper, leather. Main models Common models for the C, A Standard： ASTM D3786，AS2001.2.4，BS
Qinsun Instruments (Shanghai) Co., Ltd. [2018-01-26 10:25:36 ]
Brief Introduction： The fogging tester is designed to test the fogging phenomena of leather and fabric under specified environment conditions, suitable for the fogging property evaluation of volatile components of the interior trimming materials used in cars and aircrafts under
Qinsun Instruments (Shanghai) Co., Ltd. [2018-01-26 10:24:28 ]
This rubbing color fastness tester is a standard testing machine of the Type II rubbing tester (GAKUSIN TYPE) specified in JIS L0849 Test Method of Rubbing Fastness in JIS Textile-Tests For Color Fastness. It is applied to determine the color resistance of dyed or printed textile
Qinsun Instruments (Shanghai) Co., Ltd. [2018-01-26 10:23:26 ]
Brief Introduction The textile ozen aging color fastness tester is mainly used for testing color fastness properties of fabrics exposed to ozone environment; it is the special equipment for testing the fabric colorfastness to ozone. Product Description 1. Equipped with a high eff
Qinsun Instruments (Shanghai) Co., Ltd. [2018-01-26 10:22:29 ]
IP Code Test What is IP Code Test? The IP Code, International Protection Marking, sometimes interpreted as Ingress Protection Marking, classifies and rates the degree of protection provided against intrusion (body parts such as hands and fingers), dust, accidental contact, and wa
EBO TESTING CENTER [2018-01-22 11:38:08 ]
