Optical Instruments Manufacturers and Suppliers
Features 1. Measuring results display in real time ; available data management data autosave, data query , data analysis , data report export ; 2. Adopt extremely high-resolution imported motor , which ensures the measurement accuracy ; 3. The sample carrier is automatically pos
Suzhou PTC Optical Instrument Co., Ltd [2021-06-24 17:05:44 ]
LPCE-2 Integrating Sphere Spectroradiometer LED Testing System is for single LEDs and LED lighting products light measurement. LED’s quality should be tested by checking its photometric, colorimetric and electrical parameters. According toCIE 177 System Configuration High Preci
Lisun Electronics Co., Ltd [2021-05-12 14:59:29 ]
LPCE-3 is a CCD Spectroradiometer Integrating Sphere Compact System for LED Testing. It is suitable for single LED and LED luminaires\' photometric, colorimetric and electrical measurement. The measured data meets the requirements ofCIE 177 System Configuration CCD Spectroradiome
Lisun Electronics Co., Ltd [2021-05-12 14:57:59 ]
The Portable CCD LED Colorimeter Spectroradiometer has the following versions which can measure different parameters LISUN Model Function Wave Range LMS-6000 illuminance (lux), E(Fc), Ee(W/m2), Tc (K), Duv Correlated Color Temperature (CCT), Chromaticity Coordinates, CRI, Purity,
Lisun Electronics Co., Ltd [2021-05-12 14:56:25 ]
LSG-1890BCCD/LSG-1800ACCD goniospectroradiometer is high precision automatic goniophotometric instrument for luminous intensity distribution measurement with facility for rotating the light source. The LSG-1890BCCD/LSG-1800ACCD can do the spatial CCT test and the intensity distri
Lisun Electronics Co., Ltd [2021-05-12 14:54:54 ]
Automatic Magnet stripe Dimension D etection E quipment F unction This Automated Optical Inspection device can detect the length and width of magnetic stripe s , display the measurement results in real time, and automatically judge whether it is qualified (OK) or unqualified (NG)
Suzhou PTC Optical Instrument Co., Ltd [2021-01-25 11:54:07 ]
1. With a thickness of only 7.6mm and a width of 44mm, there is no need to worry about being limited by the measurement space. 2. The sampling speed of 2048 times per second provides accurate data for the UV energy meter and can pass and obtain the calibration certificate from Ch
linshangtech [2021-01-19 11:35:58 ]
The LS183 spectrum transmission meter use ultraviolet light source, infrared light source and visible light source to illuminate the tested transparent material. The sensor detects the light intensity of the three light sources and the light intensity after transmitting the teste
linshangtech [2021-01-19 11:33:26 ]
1. Three light sources share a test hole, which can obtain 380nm-760nm visible light transmittance, 940nm infrared and 365nm ultraviolet transmittance in one measurement, easy to operate and save time. 2. Parallel light design, the measurement results of testing large thickness m
linshangtech [2021-01-19 11:25:03 ]
1. The test aperture of this lens transmission meter is 0.5mm. Materials whose size are larger than 0.5mm can be measured. 2. The three light sources share a test hole. Three data can be obtained by measuring for just one time. Easy to operate and save time. 3. The test hole has
linshangtech [2021-01-19 11:21:47 ]
1. The light transmittance meter adopts the parallel light path of the light source and the light collecting design of the receiver, so that it can measure large thickness materials. 2. Equipped with a fixed base, with two measurement methods; that is, it is suitable for testing
linshangtech [2021-01-04 11:27:41 ]
1. The LS123 UV power meter is suitable for testing the ultraviolet rejection performance of explosion-proof films, automotive insulation films, solar films and insulating glass. 2. It can be used to measure the radiation intensity (ultraviolet power density) of ultraviolet light
linshangtech [2021-01-04 11:22:42 ]
Measuring Angle 60° Measurement range 0-1000GU Resolution 0.1GU Repeatability 0-100GU ±0.2 ；100-1000GU ±0.2% reading Reproducibility 0-100GU ±0.5 ；100-1000GU ±0.5% reading Error of indication 0-100GU ±1.5 ；100-1000GU ±1.5% reading Zero error 0.1GU Measuring aperture
linshangtech [2021-01-04 10:54:36 ]
LS131 UV energy meter is a professional instrument for UV LED light source detection. The UV energy meter can detect the power and energy value of UV light source. Spectral range 340nm-420nm, calibrated at 395nm Irradiance measuring range 0-40000mW/cm² Irradiance resolution 1mW/
linshangtech [2020-12-22 11:46:33 ]
Linshang LS130 UV energy meter is a domestic ultraviolet energy meter that can measure UV energy and UV intensity at the same time. Spectral range 315nm-400nm, λp = 365nm Irradiance measuring range 0-2000mW/cm² Irradiance resolution 0.1mW/cm² Energy measuring range 0-999999mJ/
linshangtech [2020-12-22 11:45:20 ]
LS128 UV energy meter is the first professional UV energy meter for testing UV LED light sources in the world. Its spectral response range is 340nm-420nm. It can test various wavelengths of 365nm, 375nm, 385nm, 395nm, 405nm Application Light intensity, energy and temperature meas
linshangtech [2020-12-22 11:43:18 ]
LS133 UV energy meter can display UV irradiation intensity, UV energy and temperature at the same time. This UV integrator is suitable for measuring various UV LED light sources such as 365nm, 385nm, 395nm, 405nm, etc. Application Light intensity, energy and temperature measureme
linshangtech [2020-12-22 11:39:08 ]
Linshang LS201 digital glass thickness meter uses the optical reflection principle to measure the glass thickness on one side of the glass. Measurement accuracy ± 0.1mm Measurement range Glass thickness 70mm，air layer thickness 45mm Weight 330g Battery 4 AAA alkaline dry batte
linshangtech [2020-12-22 11:03:12 ]
Linshang LS123 portable UV power meter, also known as UV lamp intensity meter. This is an instrument with a wide spectrum receiving range. It is mainly used for measuring the UV rejection rate of materials. It is suitable for displaying the UV rejection performance of materials s
linshangtech [2020-12-22 10:56:17 ]
This device automatically detects the image luminance , thereby finding the darkest point precisely . By inputting sample photoelastic constant and thickness in advance , the stress value will be calculated by the computer . In addition, Sensitive C olor method is used to clearly
Suzhou PTC Optical Instrument Co., Ltd [2020-12-18 13:27:47 ]
