tems Parameters The measuring range of electrostatic voltage 0 ~ 10kV The half-life time range 0 ~ 99.99 h Rotation speed 1500 RPM Discharge time 0 ~ 99.99 s (test is scheduled (30 + 0.1) seconds) Discharge distance between needle electrode and specimen 20mm Measurement distance
Shanghai Qianshi Precision Electromechanical Techn [2025-01-09 15:10:41 ]
PSM1500 AC/DC standard meter is a new generation of standard meter produced by hangzhi precision. The product adopts a new software and hardware design, which can simultaneously measure single-phase AC and DC voltage, current, frequency, phase, active power, reactive power, inspe
Shenzhen Hangzhi Precision Electronics Co., Ltd [2024-09-29 09:58:02 ]
HZ601 Collection Programmable DC Standard Power Source is a high-level meter & power source integrated instrument which invested by Shenzhen Hangzhi, who gathering high-tech talents, adopting the unique electronic compensation linear sampling technology which ensure full range li
Shenzhen Hangzhi Precision Electronics Co., Ltd [2024-09-10 14:57:14 ]
Hangzhi DIT300-SG is a 300 Amp High Precision Digital Current Transducer with an accuracy of 200ppm (200 parts per million). The multi-point zero-flux technology system applied in this high-precision DC transducer enables zero-flux closed loop control of excitation flux, DC flux
Shenzhen Hangzhi Precision Electronics Co., Ltd [2024-09-02 09:39:00 ]
HIT600 has a high gain and measurement accuracy in the full bandwidth range, due to the application of the multi-point zero-flux technology system and high-frequency ripple sensing channel on top of currently existing DC sensor technology. Primary Nominal Current DC600A, AC424A,
Shenzhen Hangzhi Precision Electronics Co., Ltd [2024-08-28 15:09:48 ]
IIT200 has a high gain and measurement accuracy in the full bandwidth range, due to the application of the multi-point zero-flux technology system and high-frequency ripple sensing channel on top of currently existing DC sensor technology. Primary Nominal Current DC200A, AC141A,
Shenzhen Hangzhi Precision Electronics Co., Ltd [2024-08-28 15:04:06 ]
DIT600-SG high-precision digital current sensor products are a new generation of digital sensors developed and produced by Hangzhi. This product adopts brand-new software and hardware design, can measure single-phase AC and DC current and frequency at the same time. The high-prec
Shenzhen Hangzhi Precision Electronics Co., Ltd [2024-08-28 15:03:58 ]
AIT1500-10V has a high gain and measurement accuracy in the full bandwidth range, due totheapplicationof the multi-point zero-flux technology system and high-frequency ripple sensing channel ontopof currentlyexisting DC sensor technology. Measuring range ±1500A Output signal sta
Shenzhen Hangzhi Precision Electronics Co., Ltd [2024-08-23 17:52:16 ]
AIT600-SG has a high gain and measurement accuracy in the full bandwidth range, due to theapplicationofthe multi-point zero-flux technology system and high-frequency ripple sensing channel ontopof currentlyexisting DC sensor technology. Measuring range ±600A Output signal analog
Shenzhen Hangzhi Precision Electronics Co., Ltd [2024-08-23 17:52:04 ]
This GF6018A high precision multi-product calibrator is compliance with national verification regulation JJG124-2005 \"Ammeter, voltmeter, power meter and resistance meter verification rules\" and related national standards. 0.05% single-phase standard AC/DC voltage and current s
gfuvegroup [2024-02-19 16:13:04 ]
FU2200A ethernet digital power meter with data logger is a three-phase multifunction power and energy meter manufactured by GFUVE GROUP. It provides excellent value for monitoring power and energy management systems. It may be used as data gathering devices for intelligent power
gfuvegroup [2024-02-04 17:40:17 ]
GF312B2 portable three phase reference meter high accuracy 0.02%, with all kinds of optional clamp on ct and smart optical sampler. It can be applied in electrical laboratory or on site. it will be ensured by a combination of measures such as the use of 24bit A/D converter, DSP+3
gfuvegroup [2024-02-04 17:20:50 ]
The round jaw design on the S50 Series AC current clamp on CT along with the high content permalloy core makes them well suited for power quality applications where high accuracy and low phase shift along with wide frequency are important from 10Hz to 10MHz. Measurement range is
gfuvegroup [2024-02-04 16:55:08 ]
The model Q150 current transformer clamp can be used in large current situation and cooperate to cable fault tester and cable identification device, used for cable test work. It can even measure up to 3000A AC large current and output 0-5A AC current for other measuring or analyz
gfuvegroup [2024-02-03 17:42:52 ]
The model XQ20 clamp on current sensor is suitable for 200A cable online measurement, the user friendly shape make It easily clamp onto cables or bus bars, no need to interrupt the power supply and disconnect the circuit in testing, easy to carry and especially suitable for on-si
gfuvegroup [2024-01-25 17:45:13 ]
The model Q20A 100A current clamp sensor is ideal for using with electronic meter or other device with AC current input, it is suitable for 100A cable online measurement, max 200A. Only weight 300g, it has high accuracy class 0.1% and wide frequency range from 10Hz to 20KHz. Clam
gfuvegroup [2024-01-25 13:23:26 ]
What is the difference between 2-wire transmitter, 3-wire transmitter and 4-wire transmitter? 2-wire transmitter 3-wire transmitter 4-wire transmitter Four-wire transmitters have their own internal power supply, and they do not need to be connected to a DC power suppl
Shanghai Chenzhu Instrument Co., Ltd. [2024-01-10 16:09:20 ]
Power transmitter can transfer complicated current like 0~1A/0~5A/0~10A into industry-standard output, adopting the true RMS detection technology. We offer DC supply (True RMS) or AC supply for your choice. Voltage transmitter can be used in the detection of the non-sinusoidal cu
Shanghai Chenzhu Instrument Co., Ltd. [2024-01-10 16:06:59 ]
This product is specially designed for online monitoring of the ground network resistance of lightning protection devices. This smart ground earth resistance digital clamp tester can be installed individually or assembled into a wired network and a wireless network system. It can
Shenzhen Techwin Lightning Technologies Co., Ltd [2023-11-13 15:04:59 ]
Thermal resistance type isolator, the two-wire or three-wire system resistance signal is converted into 0/4~20mA current signal isolation or 0/1~5V voltage signal output. It is intelligent, can through the computer scope of heat resistance index number range and configuration. Th
Shanghai Chenzhu Instrument Co., Ltd. [2023-08-28 16:10:26 ]
