UL, CE CNAS mark;
Large jaw opening designed;
Holding wire diameter: φ150mm;
Frequency 40Hz-2000Hz Bandwidth;
Conforms to EN 61010, 600V CAT III;
Measurement range of 1A to 3600A AC;
Low phase shift for power measurement;
Precision 0.5% for current measurement;
Industrial design & beautiful appearance;
Transformation ratio: 1000:5, 2000:5, 3000:5
Improved ergonomic design & easy operation;
Output:5mA AC/A AC, 2.5mA AC/A AC, 1.666mA AC/A AC;
Nominal range: 1 to 1000AAC, 1 to 2000AAC, 1 to 3000A AC;
When less than 1A output, load capacity ≤20Ω; When 5A output, load 2.5VA;
Designed for cable fault analysis, recorders, loggers, power and harmonic meters;
Parameters:
Accuracy: 0.2%, 0.5%, 1%
Ratio: 600: 1 , 1000:1, 2000:1, 3000:1
Primary current:0 - 3000A AC
Secondary current: 0 - 5A AC
Frequency range: 40Hz-2000Hz
Size: 229*364*44mm
Weight: 1700g
Split Core Current Transformer The appearance is nice and the installation and wiring are convenient. AKH-0.66/K-Φ series split type ct transformers are mainly used in reconstructing projects of urban and rural power grids. Product has the advantages of small size, high ...
The model Q125 2000A current transformer clamp on measuring instrument can be used for a current vector for the copper bar or the power aluminum bus bar on-line detection. It has a 120mm * 50mm square hole, make it specially suitable for bus bar current measurement. In this ...
The round jaw design on the S50 Series AC current clamp on CT along with the high content permalloy core makes them well suited for power quality applications where high accuracy and low phase shift along with wide frequency are important from 10Hz to 10MHz. Measurement range is ...
The model XQ20 clamp on current sensor is suitable for 200A cable online measurement, the user friendly shape make It easily clamp onto cables or bus bars, no need to interrupt the power supply and disconnect the circuit in testing, easy to carry and especially suitable for ...
The model Q20A 100A current clamp sensor is ideal for using with electronic meter or other device with AC current input, it is suitable for 100A cable online measurement, max 200A. Only weight 300g, it has high accuracy class 0.1% and wide frequency range from 10Hz to 20KHz. ...
Acrel AKH-0.66/K series current transformer split core are mainly used in reconstructing projects of urban and rural power grids. The split core current sensors can be mounted easily without the removal of the primary bus. They also can be operated with electricity, which ...
M100 series power supply system AC modules are mainly applicable to the power distribution systems for class I / type 1 protection. Type 1 spd surge arrester can protect electrical equipment from the impact of lightning electromagnetic pulse, induced overvoltage, transit ...
Acrel AKH-0.66/K series split core current transformer are mainly used in reconstructing projects of urban and rural power grids. The split core current sensors can be mounted easily without the removal of the primary bus. They also can be operated with electricity, which ...
The appearance is nice and the installation and wiring are convenient. AKH-0.66/K-Φ series split current transformers are mainly used in reconstructing projects of urban and rural power grids. Product has the advantages of small size, high accuracy, strong load capacity, easy ...