Measurement & Analysis Instruments Manufacturers and Suppliers

Total 27446 products found
OPC-R1 PM2.5 Particle Sensor

OPC-R1 Particle Sensor Schematic Diagram • Reports PM1, PM2.5, PM10 plus histograms • SPI connection for communication and firmware upgrades • PC software supplied • Removable fan exit adaptor • Small size and low power consumption • Configurable to specific applicati

ISweek company      [2017-11-27 16:44:32 ]

MB1003 HRLV-MaxSonar-EZ0 High Performance Ultrasonic Rangefinder

MB1003 HRLV-MaxSonar-EZ0 High Performance Ultrasonic Rangefinder MB1003 HRLV-MaxSonar-EZ0 Ultrasonic Rangefinder Product Description The HRLV‑MaxSonar‑EZ0 has the widest and most sensitive beam pattern of any unit from HRLV‑MaxSonar‑EZ sensor line. This makes the HRLV‑M

ISweek company      [2017-11-27 16:30:32 ]

Needle Flame Tester GB4706

Introduction Needle Flame Tester is in accordance with national standards GB4706.1-1998 to design and produce .The tester applies for lighting, low-voltage electrical equipment, household appliances, electrical machines, motors, power tools, electronic equipment, electrical instr

chongqing gold co ltd      [2017-11-27 11:01:44 ]

Car Interior Decorations Combustion Tester Gbt8410

Introduction car inner decorations combustion test is designed and manufactured according to ISO3795 standards and relevant clauses. Apply to identify vehicles (cars, multipurpose passenger car, truck and bus) interior material horizontal burning test. A high degree of automation

chongqing gold co ltd      [2017-11-27 10:50:02 ]

Density Smoke of Building Material Burning or Plastic Decomposing

Introduction In a fire, people are often smoke suffocated or unable to escape because of the invisible road, so in the prevention of fires, smoke density of the test material is essential. building materials smoke density Tester conforms to the national standard GB/t 8627-2007 sp

chongqing gold co ltd      [2017-11-27 10:45:46 ]

Flooring Radiant Panel Tester ISO9239-1 Gbt11785

Introduction Critical Radiant Flux of the main parameters of flooring materials evaluate the fire risk, and it characterizes the flooring material samples subjected to conditions at the thermal radiation from outside flame. According ISO9239-1,2 requirements, and flooring heat ra

chongqing gold co ltd      [2017-11-27 10:21:21 ]

Thermal Radiation Melt Drop Tester NF P92

Introduction thermal radiation flame propagation tester can be used for more than 5mm thickness of rigid and elastic material performance evaluation, and it is developed according to flame test standard NF P92-501. The tester to provide 30KW / m2 heat radiation, which may lead to

chongqing gold co ltd      [2017-11-27 10:04:19 ]

Laser Measuring Equipment

Laser Measuring Equipment The laser measuring instrument webiste http://www gem-lasers com/laser-products/laser-measuring-equipment/ company GEM LASER LIMITED contact 86-27-84793136 email sales@gem-lasers com

GEM LASER LIMITED      [2017-11-26 22:23:59 ]

VCZW31-5G-15-04-J-X21 0190-11558

VCZW31-5G-15-04-J-X21 0190-11558 ALLEN BRADLEY CONTACTS US Market Manager Ada Email sales9@amikon cn Fax +86 0592-5165-561 | Mobile / Wechat +86 181-5011-7685 Sick s300 Sicherheits S30B-2011BA 1026820 Sick LMS200-30106 Laserscanner 1015850 SW 02.03 Sick Distanzmesseinheit DME300

AMIKON LMITED      [2017-11-24 13:48:19 ]

Vertical Cable VW-1 Flame Tester UL 1518

Introduction cable horizontal and vertical burning test apparatus(VW-1)is designed according to UL1581 sect 1080.1~1080.14, and meet the criteria of VW-1(Vertical-specimen) Flame Test. It can be used to test of 1060 products wire and cable FT1 and vertical burning test,1080 VW-1

chongqing gold co ltd      [2017-11-24 10:08:37 ]

Non-Combustibility Tester for Building Material Gbt5464

Introduction Non-Combustibility Tester measures incombustibility and combustibility of uniform building material and non-uniform building material of actual element International standards 1. GBT5464 2. ISO1182 3. ASTM E136 4. KS F ISO 1182 Features • Single Zone Furnace operab

chongqing gold co ltd      [2017-11-23 13:42:32 ]

Combustion Calorimeter of Building Material Gbt1440

Introduction combustion of materials is important characterize parameters to calculated building materials release heat and fire basic data. The tester is one of the devices is designed according to ISO1716-2002 International standards 1. GBT1440 2. ISO1716-2002 Features 1, The a

chongqing gold co ltd      [2017-11-23 12:09:16 ]

UL94 Horizontal /Vertical Flame Chamber ISO1210 Gbt2408

Introduction UL 94 measures the combustion properties (after flame, after glow) by burner (H-5025 UL tirrill burner) when test sample combusts in chamber\'s internal volume of 0.864 and is installed internal light to observe the specimen\'s properties and has ventilating opening

chongqing gold co ltd      [2017-11-23 11:55:33 ]

Imo Spread Flame Apparatus Radiant Panel Flame Spread Tester

Introduction IMO spread flame apparatus is used to evaluate combustion characteristics of building materials and ship materials and measures spread rate of flame, flame for ignition by distances, CFE (Critical Flux at Extinguishment) and total heat release. This test method is or

chongqing gold co ltd      [2017-11-23 11:53:03 ]

Cone Calorimeter Gbt16172 ASTM E1354

Introduction Cone Calorimeter measures heat release rate(H R.R), smoke release, ignition time, oxygen consumption, carbon monoxide and carbon dioxide generation and mass loss rate when specimen is exposed to resource of conical heater. International standards 1. GBT16172 2. ISO 5

chongqing gold co ltd      [2017-11-23 11:49:45 ]

Combustibility Tester of Building Material /Single Flame Source Test

Introduction this instrument is designed according to ISO11925-2, it is used to test building material under conditions in the absence of external radiation to direct impact of vertically placed samples with a small flame to determine the flammability of building products. Intern

chongqing gold co ltd      [2017-11-23 11:46:38 ]

Bunched Cable Vertical Flame Spread Tester Gbt18380b

Introduction Bunched Cable Vertical Flame Spread Tester is used to bundle cable orfiber optic cable to detect vertically mounted under specified conditions forvertical flame spread inhibiting the ability of the instrument, the power cables,control cables, fiber optic cable bundle

chongqing gold co ltd      [2017-11-23 11:37:35 ]

Single Vertical Flame Spread Tester/Single Cable Burning Testing

Introduction Single wire and cable vertical burning tester is themost widely used and low cost of cable fire performance test equipment; TESTECHsingle wire or cable burning tester meet the national standard GB /T18380.11-2008 / IEC60332-1-1 2004 requiremen. It is to test cable ,

chongqing gold co ltd      [2017-11-23 11:28:23 ]

Thermal Protection (radiation) Performance Testing ISO6942

Introduction thermal protection (radiation) performance testing in accordance with ISO6942 and EN366 standards of design and manufacturing. This tester fully compliant to test requirements and received US and European customers\' acception; The device has a user-friendly, intuiti

chongqing gold co ltd      [2017-11-23 11:19:07 ]

ADEPT 20310-42100

ADEPT 20310-42100 ADEPT 20310-42100 ADEPT 20310-42100 Amber Sale manager Skype sales6@amikon cn Tel +86-0592-5322116 Fax +86-0592-5165561 Mobile Phone(Whatsapp) +86-18020776782 PLS Sending Me Email , I Will Reply You ASAP. AMIKON LIMITED is a leading global supplier of control s

Amikon Co.,Ltd      [2017-11-21 15:47:42 ]