Needle Flame Tester is in accordance with national standards GB4706.1-1998 to design and produce .The tester applies for lighting, low-voltage electrical equipment, household appliances, electrical machines, motors, power tools, electronic equipment, electrical instruments, electrical connectors, accessories and other electrical and electronic equipment and parts, component research, production and quality control departments and insulating materials , plastic or other solid combustible materials industry to carry on small-flaming ignition experiments.
Technical Parameters:
• Integrated body and 19" analysis rack
• 17" touch screen panel type PC for the whole control and automatic testing
• Automatic Spark Igniter to facilitate measurement of ignition time
• Auto Split Shutter automatically opened to transmit radiation to the sample
• Absorber-type glass protection door to facilitate sample observation during test and opening and closing
• UK Servomex's Gas Analyzer to exactly measure O2, CO, and CO2 concentrations up to 0.02%
• Port, heated filter, and heated line to measure toxic gases
• MFC(Mass Flow Controller) used for all gas flows, improving accuracy of and automatically controlling flux
• Portable water cooling system without need for waterworks and plumbing when using the Heat Fluxmeter (for ISO 5660)
• UK RS' Load Cell with improved accuracy to measure mass loss rate
• CC 2006 DAQ(Data Acquisition) Program controllable with the touch screen panel PC
Specification:
Power | 220V / AC, 50Hz |
Burning time | 0s ~ 999.9s, automatic recording, manual pause |
Size | 1120 * W520 * H1250mm, |
Model | GD4706 |
According toIEC60695-2-2 [caption id=\"attachment_4380\" align=\"aligncenter\" width=\"400\"]ZY-3S Needle Flame Test (Compact ...
According toIEC60695-2-2 [caption id=\"attachment_4380\" align=\"aligncenter\" width=\"400\"]ZY-3S Needle Flame Test (Compact ...
Standard : BS EN136-1998 Respiratory protective devices -Full face masks - Requirements testing, marking GB 19083-2010 Technical requirements of medical protective masks YY 0469-2011 Technical requirements of medical surgical masks-Blood penetration test device GB 2626-2006 ...
Medical mouth mask flame retardant property tester Standard: GB 19083-2010 medical protective mask technical requirements Scope: It is the special test equipment mainly used for testing medical masks flame retardant properties. Instrument Description: The device is a mask ...
Standards: GB / T 4207-84, IEC 6112, ASTM D3638, DIN 53480 and UL 746A test methods Scope of application: Needle flame tester used not only for low-voltage electrical appliances, power tools, machine tools, electrical instruments, household appliances, electrical, electronic ...
Image Introduction: cable horizontal and vertical burning test apparatus(VW-1)is designed according to UL1581 sect 1080.1~1080.14, and meet the criteria of VW-1(Vertical-specimen) Flame Test. It can be used to test of 1060 products wire and cable FT1 and vertical burning ...
Image Introduction: Full Face Masks Flame Resistance Tester is mainly composed of jacket and bib composition, may also wear fire protective helmets, fire protective boots and fire-protective gloves! Each set must be fitted a serial number of check marks with strong national ...
Image Introduction: IMO spread flame apparatus is used to evaluate combustion characteristics of building materials and ship materials and measures spread rate of flame, flame for ignition by distances, CFE (Critical Flux at Extinguishment) and total heat release. This test ...
Medical mouth mask flame retardant property tester Standard:GB 19083-2010 medical protective mask technical requirements Scope: It is the special test equipment mainly used for testing medical masks flame retardant properties. Instrument Description: The device is a mask with a ...