Eddy Current Testing for Auto Parts

NDT Application in Automotive Industry: Eddy current hardness testing technology has been widely used in the detection of metal components in the automotive. The eddy current technology is usually used to detect engine blade cracks, bolts, cracks in the screw holes, multi-layer ...

Nanjing BKN Automation System Co.,LTD    [Computer Hardware & Software]   [Blank Media]   [2023-03-23 14:14:58 ]

Connecting rod hardness eddy current sorting machine LGYDFX-01

The connecting rod hardness eddy current sorting machine has a calibration device, input compensation parameters, automatic/manual temperature compensation and light intensity compensation, and automatic temperature measurement and temperature correction. The digital ...

Nanjing BKN Automation System Co.,LTD    [Computer Hardware & Software]   [Blank Media]   [2023-03-23 14:14:28 ]

Bolt Eddy Current Sorter BKNFX-11

Bolt: Mechanical parts, cylindrical threaded fasteners with nuts. A type of fastener consisting of a head and a screw (a cylinder with an external thread) is required to be fitted with a nut for fastening the two parts with through holes. This type of connection is called a ...

Nanjing BKN Automation System Co.,LTD    [Computer Hardware & Software]   [Blank Media]   [2023-03-23 14:13:58 ]

BKNET-101 Automatic Eddy Current Testing

The eddy current testing (BKNET-101) is a fully automated eddy current inspection system that uses large-scale imported integrated circuits combined with advanced eddy current technology, photoelectric technology and microcomputer control. With a beautifully designed mechanical ...

Nanjing BKN Automation System Co.,LTD    [Computer Hardware & Software]   [Blank Media]   [2023-03-23 14:13:28 ]

BKNET-0102 Welded Pipe Eddy Current Flaw Detector

Eddy current weld testing is the use of eddy current technology to test the welded pipe, this type of testing is based on the premise of lossless. At the same time, we need to be clear that the welded pipe is, in general, the steel pipe that we usually say, which is a welded ...

Nanjing BKN Automation System Co.,LTD    [Computer Hardware & Software]   [Blank Media]   [2023-03-23 14:12:58 ]

Bearing Ring Crack and Hardness Combination Flaw Detector TQJC-02

During the processing of bearing rings, various defects are often generated on the surface or inside, and cracks occupy a large proportion of all defects. The cause of the cracks in the bearing rings is complicated. From the raw materials to the finished products of the ...

Nanjing BKN Automation System Co.,LTD    [Computer Hardware & Software]   [Blank Media]   [2023-03-23 14:12:27 ]

Eddy Current Testing Equipment

ECT Eddy current testing used by eddy current test set is a non-contact testing method, which mainly uses the electromagnetic field and electromagnetic induction between metals to detect. It is one of the NDT non-destructive testing methods in the industry. The principle of ...

Nanjing BKN Automation System Co.,LTD    [Computer Hardware & Software]   [Blank Media]   [2023-03-23 14:11:48 ]

Magnetic Flux Leakage Testing Equipment

Electromagnetic detection is a very important non-destructive testing method and is widely used. Mag flux testing is a magnetic method of nondestructive testing that is used to detect corrosion and pitting in steel structures, most commonly pipelines and storage tanks. The ...

Nanjing BKN Automation System Co.,LTD    [Computer Hardware & Software]   [Blank Media]   [2022-09-28 14:22:28 ]

RQ-120-B Automatic CNC EDM Notch

\"RQ-120-B Electric Pulse Automatic CNC EDM notches\" is a precise instrument specially developed by Nanjing BKN Automation System Co., Ltd. for making inspection sample bars. It can be processed by controlled electric sparking method. It can be used to make longitudinal and ...

Nanjing BKN Automation System Co.,LTD    [Computer Hardware & Software]   [Blank Media]   [2022-09-28 14:21:52 ]

Valve Tappet Eddy Current Flaw Detector QMTZET-04

Tappet full automatic eddy current testing system is a full automatic crack hardness sorter that integrates light, electricity and machinery. The whole system includes a main control system, charging system and mechanical transmission system. The workpiece is sent to the area ...

Nanjing BKN Automation System Co.,LTD    [Computer Hardware & Software]   [Blank Media]   [2022-09-28 14:21:24 ]

BKNFX Pre-Multi-Frequency Eddy Current Hardness Separator

Stimulating the coil makes a magnetic induction to the tested material. The induced electromotive force received by the testing coil is related to the shape and size of the material hysteresis loop. When the low-frequency sinusoidal wave excitation voltage is magnetically ...

Nanjing BKN Automation System Co.,LTD    [Computer Hardware & Software]   [Blank Media]   [2022-09-28 14:20:55 ]

LGET-553 Aluminum Tube Eddy Current Flaw Detector Brief Introduction

The aluminum tube is a type of non-ferrous metal which may have one or more closed holes which are thick and uniform in cross-section. It is widely used in electrical, agricultural, electromechanical and other industries. Therefore, when using aluminium tubes, we need to test ...

Nanjing BKN Automation System Co.,LTD    [Computer Hardware & Software]   [Blank Media]   [2022-09-28 14:20:28 ]

GSET-551 Steel Wire Eddy Current Flaw Detector

GSET-551 Steel Wire Eddy Current Flaw Detector Brief Introduction Using the eddy current signal processing method and high-performance DSP algorithm, the NDT wire rope tester detection ability of micro-crack is as high as 0.05mm deep crack. Using computer digital technology and ...

Nanjing BKN Automation System Co.,LTD    [Computer Hardware & Software]   [Blank Media]   [2022-09-28 14:20:02 ]

Application of Ndt Inspection Equipment

Ndt inspection equipment is widely used in industry, such as nuclear industry, weapon manufacturing, machinery industry, shipbuilding, petrochemical industry, railway and high-speed train, automobile, boiler and pressure vessel, special equipment, customs inspection, etc. Many ...

Nanjing BKN Automation System Co.,LTD    [Computer Hardware & Software]   [Blank Media]   [2022-09-28 14:19:32 ]

Eddy Current Testing for Auto Parts

NDT Application in Automotive Industry: Eddy current hardness testing technology has been widely used in the detection of metal components in the automotive The eddy current technology is usually used to detect engine blade cracks, bolts, cracks in the screw holes, multi-layer ...

Nanjing BKN Automation System Co.,LTD    [Computer Hardware & Software]   [Blank Media]   [2022-07-22 16:57:38 ]

Connecting rod hardness eddy current sorting machine LGYDFX-01

The connecting rod hardness eddy current sorting machine has a calibration device, input compensation parameters, automatic/manual temperature compensation and light intensity compensation, and automatic temperature measurement and temperature correction. The digital ...

Nanjing BKN Automation System Co.,LTD    [Computer Hardware & Software]   [Blank Media]   [2022-07-22 16:57:14 ]

Bolt Eddy Current Sorter BKNFX-11

Bolt: Mechanical parts, cylindrical threaded fasteners with nuts. A type of fastener consisting of a head and a screw (a cylinder with an external thread) is required to be fitted with a nut for fastening the two parts with through holes. This type of connection is called a ...

Nanjing BKN Automation System Co.,LTD    [Computer Hardware & Software]   [Blank Media]   [2022-07-22 16:56:52 ]

BKNET-101 Automatic Eddy Current Testing

The eddy current testing (BKNET-101) is a fully automated eddy current inspection system that uses large-scale imported integrated circuits combined with advanced eddy current technology, photoelectric technology and microcomputer control. With a beautifully designed mechanical ...

Nanjing BKN Automation System Co.,LTD    [Computer Hardware & Software]   [Blank Media]   [2022-07-22 16:56:29 ]

BKNET-0102 Welded Pipe Eddy Current Flaw Detector

Eddy current weld inspection is the use of eddy current technology to test the welded pipe, this type of testing is based on the premise of lossless. At the same time, we need to be clear that the welded pipe is, in general, the steel pipe that we usually say, which is a welded ...

Nanjing BKN Automation System Co.,LTD    [Computer Hardware & Software]   [Blank Media]   [2022-07-22 16:56:04 ]

Bearing Ring Crack and Hardness Combination Flaw Detector TQJC-02

During the processing of bearing rings, various defects are often generated on the surface or inside, and cracks occupy a large proportion of all defects. The cause of the cracks in the bearing rings is complicated. From the raw materials to the finished products of the ...

Nanjing BKN Automation System Co.,LTD    [Computer Hardware & Software]   [Blank Media]   [2022-07-22 16:55:42 ]