supply RTV 2 molds making materials silicone rubber HY630 for resin&plaster artwork industry
Product Details
Mobile:86 150 1853 7034
TEL :86 755 8994 8294
Web:www(dot)szrl(dot)net
If you need more information of RTV 2 molds making materials silicone rubber ,you can contact Miss Yolanda at any time :
For best results, allow the mold to air cure an additional 24 hours before using it in production .
8. Allow the rubber to cure for 2-4 hours at 24C before removing the cured rubber mold from the pattern. Heat acceleration not recommended with this product.
7. Pour the deaired material slowly in a steady stream from one end of the mold box so that the material flows evenly over the pattern. This should minimize emtrapment of air bubbles under the flowing material. Areadymold may be poured firstly over the pattern, which will also help reduce the possibility of entrapping air on the pattern and in the cured rubber.A mold release may be applied on the pattern first to improve release.
6. Bleed air slowly into the vacuum chamber. When the chamber is at atmospheric equiplibrium,remove the cover plate and take out the container.
5. Though it is often unnecessary to deair the material due to its low viscosity some may choose to do so. If so,place the container into a vacuum chamber and evacuate the entrapped air from the mixture using a vacuum pump capable of achieving 29 inches of mercury vacuum.The mixture will rise, crest and then collapse in the contanier. Interruption(bumping) of the vacuum may be necessary to prevent overflowing the container. Keep the mixture under full vacuum for 2-3 minutes.
4. Weight the proper amount of catalyst into the container. Mix the base and catalyst together by stirring with a stick until a uniform color is obtained. Scrape the container walls and bottom well to insure a thorough mix.
3. This is a 100 Part A to 2 Part B mix ratio by weight.Weigh the desire amount of base into a clean mixing container.
2. Shake the catalyst container (Part B) well before use.
1. Stir the base (Part A) well beofre use (except when depending on machine ).
TECHNICAL GUIDELINES of RTV 2 molds making silicone rubber :
RTV 2 molds making materials silicone rubber HY63
for resin&plaster artwork industy
for gypsum&concrete products mold make
try for industrial to get through more products
- Model Number:HY 630 silicone rubber
- Brand Name:HY silicone rubber
- Place of Origin:Guangdong China (Mainland)
- Country:China (Mainland)
- telephone:86-755-89948013
| Delivery Time: | 3 days after received the bank receipt |
| Package: | 25KG/drum and 200KG/drum |
| Supply Ability: | 8000 Kilogram per Day |
| Minimum Order Quantity: | 200 Kilogram |
| Payment Terms: | L/C,T/T |
| Port: | shenzhen |
| FOB Price: | US $6 - 18 |
| Model Number: | HY 630 silicone rubber |
| Brand Name: | HY silicone rubber |
| Place of Origin: | Guangdong China (Mainland) |
You may also like
- liquid silicone rubber
- rtv silicone rubber
- silicon rubber
- molding silicone rubber
- making silicone rubber
- printing silicone rubber
- rubber silicone
- silicone rubber gasket
- mould silicone rubber
- mold silicone rubber
- silicone rubber product
- liquid silicon rubber
- silicone rubber seal
- silicone rubber pad
- silicone rubber keypad
- silicone rubber mold
- silicone rubber ring
- quality silicone rubber
- flexible silicone rubber
- silicone rubber
Send inquiry / quota request to supply RTV 2 molds making materials silicone rubber HY630 for resin&plaster artwork industry
Relate products of supply RTV 2 molds making materials silicone rubber HY630 for resin&plaster artwork industry
Model Number: HY 638 RTV 2 silicon rubber mater... Brand Name:HY RTV 2 silicone rubber Place of Origin:Guangdong, China (Mainland) RTV 2 silicone mold making rubber materials: for plaster&resin artwork molds making for sculpture stone mould making ...
application: for artwork mold making,resin cra... Original:Shenzhen Certificate:ISO9001,SGS Color:Any color is available Model Number:HY628 silicone rubber Brand Name:Hong Ye silicone rubber Place of Origin:Guangdong China (Mainland) High quality RTV-2 silicone rubber materials ...
Application:for artwork mold making Original:Shenzhen Certificate:ISO9001,SGS Color:Any color is available Model Number:HY628 silicone rubber Brand Name:Hong Ye silicone rubber Place of Origin:Guangdong China (Mainland) RTV-2 silicone rubber materials features 1high duplication ...
application:artwork craft mold making Original:Shenzhen Certificate:ISO9001,SGS Color:Any color is available Model Number:HY628 silicone rubber Brand Name:Hong Ye silicone rubber Place of Origin:Guangdong China (Mainland) RTV-2 silicone rubber materials features 1high ...
Model Number:HY 628silicone rubber Brand Name:HY silicone rubber Place of Origin:Guangdong China (Mainland) RTV 2 silicone mold making rubber materials for resin &plaster artwork mould making for concrete&soap&candle molds making ...
Model Number:HY630 silicone rubber Brand Name:HY silicone rubber Place of Origin:Guangdong China (Mainland) RTV 2 silicone molds making silicone rubber HY630 for clear resin industry plaster&gypsum sculpture molds making soap&candle ...
Model Number:HY 630 silicone rubber Brand Name:HY silicone rubber Place of Origin:Guangdong China (Mainland) RTV 2 molds making materials silicone rubber forsilicone molds industry for soap&candle molds industry for resin&plaster mold ...
Model Number:HY 630 silicone rubber Brand Name:HY silicone rubber Place of Origin:Guangdong China (Mainland) RTV 2 molds making materials HY630 silicone rubber for resin&plaster industry for plaster architectural ornament industry ...
Model Number:HY630 molds making silicone Brand Name:HY molds making silicone Place of Origin:Guangdong China (Mainland) RTV 2 molds making materials silicone rubber resin&plaster artwork molds making for soap&candle molds making industry ...
Model Number:HY630 molds making silicone Brand Name:HY molds making silicone Place of Origin:Guangdong China (Mainland) RTV 2 molds making materials silicone rubber resin&plaster artwork molds making for figurine crafts molds making ...
