offer RTV 2 molds making materials silicone rubber HY 630 for resin&plaster artwork molds making
Product Details
Mobile:86 150 1853 7034
TEL :86 755 8994 8294
Web:www(dot)szrl(dot)net
If you need more information of RTV 2 molds making materials silicone rubber ,you can contact Miss Yolanda at any time :
For best results, allow the mold to air cure an additional 24 hours before using it in production .
8. Allow the rubber to cure for 2-4 hours at 24C before removing the cured rubber mold from the pattern. Heat acceleration not recommended with this product.
7. Pour the deaired material slowly in a steady stream from one end of the mold box so that the material flows evenly over the pattern. This should minimize emtrapment of air bubbles under the flowing material. Areadymold may be poured firstly over the pattern, which will also help reduce the possibility of entrapping air on the pattern and in the cured rubber.A mold release may be applied on the pattern first to improve release.
6. Bleed air slowly into the vacuum chamber. When the chamber is at atmospheric equiplibrium,remove the cover plate and take out the container.
5. Though it is often unnecessary to deair the material due to its low viscosity some may choose to do so. If so,place the container into a vacuum chamber and evacuate the entrapped air from the mixture using a vacuum pump capable of achieving 29 inches of mercury vacuum.The mixture will rise, crest and then collapse in the contanier. Interruption(bumping) of the vacuum may be necessary to prevent overflowing the container. Keep the mixture under full vacuum for 2-3 minutes.
4. Weight the proper amount of catalyst into the container. Mix the base and catalyst together by stirring with a stick until a uniform color is obtained. Scrape the container walls and bottom well to insure a thorough mix.
3. This is a 100 Part A to 2 Part B mix ratio by weight.Weigh the desire amount of base into a clean mixing container.
2. Shake the catalyst container (Part B) well before use.
1. Stir the base (Part A) well beofre use (except when depending on machine ).
TECHNICAL GUIDELINES of RTV 2 molds making silicone rubber :
RTV 2 molds making materials silicone rubber
resin&plaster artwork molds making
for figurine crafts molds making
- Model Number:HY630 molds making silicone
- Brand Name:HY molds making silicone
- Place of Origin:Guangdong China (Mainland)
- Country:China (Mainland)
- telephone:86-755-89948013
| Delivery Time: | 3 days after received the bank receipt |
| Package: | 25KG/drum and 200KG/drum |
| Supply Ability: | 8000 Kilogram per Day |
| Minimum Order Quantity: | 200 Kilogram |
| Payment Terms: | L/C,T/T |
| Port: | shenzhen |
| FOB Price: | US $6 - 18 |
| Model Number: | HY630 molds making silicone |
| Brand Name: | HY molds making silicone |
| Place of Origin: | Guangdong China (Mainland) |
You may also like
- liquid silicone rubber
- rtv silicone rubber
- silicon rubber
- molding silicone rubber
- making silicone rubber
- printing silicone rubber
- rubber silicone
- silicone rubber gasket
- mould silicone rubber
- mold silicone rubber
- silicone rubber product
- liquid silicon rubber
- silicone rubber seal
- silicone rubber pad
- silicone rubber keypad
- silicone rubber mold
- silicone rubber ring
- quality silicone rubber
- flexible silicone rubber
- silicone rubber
Send inquiry / quota request to offer RTV 2 molds making materials silicone rubber HY 630 for resin&plaster artwork molds making
Relate products of offer RTV 2 molds making materials silicone rubber HY 630 for resin&plaster artwork molds making
HY-605 is a kind of room temperature vulcanized silicone rubber incondensationtype.It’sgenerally named astwopart silicone rubber ,Part A is a flowable liquid, part B is the curing agentor catalyst . It’s mainly used for mold making . HY-605 silicone rubberisusedformaking ...
Come From Hong Ye Silicone Rubber Company
HY-635 RTV-2 Mold Making Silicone Rubber Description HY-635 is a kind of room temperature vulcanized silicone rubber in condensation type. It’s generally named as two part silicone rubber , Part A is a flowable liquid, part B is the curing ...
Come From Shenzhen Hong Ye Jie Technology
HY-640 RTV-2 Mold Making Silicone Rubber Description HY-640 is a kind of room temperature vulcanized silicone rubber in condensation type. It’s generally named as two part silicone rubber , Part A is a flowable liquid, part B is the curing agent or catalyst . ...
Come From Shenzhen Hong Ye Jie Technology
Model Number: 38#,728#,788# moulding silicone r... Brand Name:Hong Ye Silicone Place of Origin:China (Mainland) Silicon features: 1) For mold making, for pad printing. 2) high tensile, tear-strength.etc.3) low shrinkage 4) non-deformation ...
Cetification:ISO9001:2000,SGS,RoHS State:liquid Color:white Model Number:HY-630 silicone rubber Brand Name:Hong ye silicone rubber Place of Origin:Guangdong China (Mainland) RTV liquid silicone rubber for mold making(HY-630):it''s liquid material 1)Usage:for gypsum product ...
Model Number:HY640 Brand Name:HY Place of Origin:Guangdong China (Mainland) Silicon features: 1 for mould making 2 for pad printing 3 using for plaster/resin and light&candle industry ...
Model Number:HY 630 silicone rubber Brand Name:HY silicone rubber Place of Origin:Guangdong, China (Mainland) RTV 2 silicone moulding rubber HY630 for flexible soap &candle molds making for concrete &cement moulds making ...
Model Number:HY 638 silicone rubber Brand Name:HY silicone rubber Place of Origin:Guangdong, China (Mainland) RTV 2 silicone molding rubber HY638 for artificial stone moulds making for plaster and resin sculpture molds making ...
Model Number: HY 638 RTV 2 silicon rubber mater... Brand Name:HY RTV 2 silicone rubber Place of Origin:Guangdong, China (Mainland) RTV 2 silicone mold making rubber materials: for plaster&resin artwork molds making for sculpture stone mould making ...
color:white Model Number:HY620#625#628#silicone rubber Brand Name:HONGYE SILICON Place of Origin:Guangdong China (Mainland) Casting silicone used for 1)resin crafts,2)PU resin,3)lighting\candles crafts& silicon with high time reproduction,low shrinkage ...
