HY301 Epoxy Resin

Place Of Origin
China
Packaging
N/A
Delivery
5 Days

HY301 Epoxy Resin

Description

HY301# epoxy resin is the most widely and largest quantity needed ,It is used by two components, resin and curing agent, with the mix ratio of 2: 1 ( Resin : curing agent 2: = 1) . Particularly suitable for the Insulation of mica material, epoxy glass steel insulating board and the reinforcing material. Because of its moderate viscosity, It is particularly suitable as a glass steel anti-corrosion lining material hand lay up method, such as for : large cement tank, storage tank, tank iron requirements of anti-corrosion. With room temperature curing agent , easy Operation by hand, and the glass cloth firmly stuck in the lining material surface, the formation of epoxy glass steel anti-corrosion layer. So it is widely used in chemical factory,winery, sewage treatment device corrosion occasion. HY301 epoxy resin is suitable for the preparation of solvent free or less solvent coating, strong anti-corrosion ability , small environmental pollution.

Application

It is particularly suitable as a glass steel anti-corrosion lining material , such as for : large cement tank, storage tank, tank iron requirements of anti-corrosion. With room temperature curing agent , easy Operation by hand, and the glass cloth firmly stuck in the lining material surface, the formation of epoxy glass steel anti-corrosion layer. So it is widely used in chemical factory,winery, sewage treatment device corrosion occasion.

Technical Parameters

Mixing Ratio Resin : Curing Agent = 2: 1
Color A: Light Yellow B: White
Appearance no visible mechanical impurity / liquid Form
Epoxied Value (eq/100g) 0.41—0.47
Hydroponically Chlorine (eq/100g) 0.03
Hydrolysis Chlorine (eq/100g) 0.014
Volatile (%) ≤1
Softening Point (℃) 12--20

Characteristics

1. Moderate viscosity

2. Strong corrosion resistance

3. The construction of small environmental pollution

4. Manual operation

Operation instructions

1. Clean the Surface of your products, make it clean and dry,

2: evenly mixing the resin and cure agent at ratio of 2:1,

3 Brush the mixed resin on the surface of your products evenly , and then put a layer of Fiberglass , then brush a layer of resin , then repeat the ways above.

Warm Tips

1 It is forbidden to pour back the material into the Original packages even it is unused ;

2 construction to be dry and well ventilated space, Far away from the fire source;

3 stored in a cool dry place,Far away from light , and close the packages well .

4 Don’t contact with skin or eyes , Otherwise clean the skin with alcohol scrub, and wash with plenty of water and go to hospital in necessary

Package
20KG/drum package

220KG/drum package

Shelf life

Six (6) months when stored under dry and cool place by original package under 25℃

More information about it, pls feel free to contact my e-mail: hyyb@szrl.net or phone: 18938867609 or Tel: 0755-89311987

  • Country: China (Mainland)
  • Business Type:
  • Market:
  • Founded Year:2006
  • Address:Building A, No.3, Hongling First Road, Liulian Shibi, Pingdi Street, Longgang District, Shenzhen, Guangdong, China
  • Contact:Angela
more images of HY301 Epoxy Resin
*Your name:
*Your Email:
*To:红叶杰科技有限公司
*Subject:
*Message:
Enter between 20 to 3,000 characters. English only.     Characters : 0 / 3000
*Enter the secure code shown below Mfrbee security Image      Reload Image

submiting now We do inquire for you , please wait ...

Glycidyl Amine Epoxy Resin
Glycidyl Amine Epoxy Resin

Glycidyl Amine Epoxy Resin is a kind of epoxy resin with glycidyl amine in its molecular chain. These products have various features on dilution ability, glass transition temperature, adhesion, volume shrinkage, and migration. Therefore, they have been widely applied in ...

Jiangsu Tetra New Material Technology Co., Ltd.

Cycloaliphatic Epoxy Resin
Cycloaliphatic Epoxy Resin

Cycloaliphatic epoxy resins refer to a series of products obtained by oxidation with butadiene and acrolein as base materials and the mixture of hydrogen peroxide and peracetic acid as oxidant. They have a variety of applications, including 3D printing, coating, ink, adhesives, ...

Jiangsu Tetra New Material Technology Co., Ltd.

air cooled 365nm UV LED Smart Curing System for Epoxy resin
air cooled 365nm UV LED Smart Curing System for Epoxy resin

For applications such as bonding, potting or fluorescence excitation, the wavelengths 365, 385, 395 and 405 nm are available. With the variety of wavelengths, you remain particularly flexible and can upgrade and change over at any time. With several UV LED lamps, the ...

Futansi (Shanghai) Electronic Technology Co., Ltd.

Epoxy Resin Mortar
Epoxy Resin Mortar

Epoxy resin mortar is based on epoxy resin as the main component, with a series of additives, forms a high-strength, high-cohesive consolidated body after mixing and curing. It is with stable chemical properties, good corrosion and weather resistance. The consolidated body has ...

Tianjin Jinhai Special Coatings & Decoration Co., Ltd

High Quality Coupling Bushing Epoxy Resin Insulator Transformer Bushing
High Quality Coupling Bushing Epoxy Resin Insulator Transformer Bushing

High Quality 24kV 250A Coupling Bushing Epoxy Resin Insulator Transformer Bushing 1.The Coupling device is made of epoxy. 2. It is suitable for power distribution system. 3.Suitable for output line of branch,RMU unit. 4.Rated current: 250A Application : 1.The 24kV 250A bushing ...

PingXing Volmet company

Superior Quality 35kv Epoxy Resin Busbar Through Insulator Bushing
Superior Quality 35kv Epoxy Resin Busbar Through Insulator Bushing

Superior Quality 35kv Epoxy Resin Busbar Through Insulator Bushing Type insulation Application High Voltage / Switchgear Color Available Product Certification CE and ISO 9001:2000 Rated voltage 10KV,24KV,35KV,40.5KV Rated Current 630A,1250A,2500A,4000A,6300A MOQ 5pcs Packing 1. ...

PingXing Volmet company

High Quality Automatic Stirring Mixing Epoxy Resin Machine
High Quality Automatic Stirring Mixing Epoxy Resin Machine

High Quality Automatic Stirring Mixing Epoxy Resin Machine Place of Origin:China mixing power:3KW mixing speed:20-70r/min capacity of pot:100L post size:1100*1000*1800mm vacuum pump power:1.1KW hydraulic power pack power:0.75KW vacuun degree:0.75mbar injection pressure:0.5Mpa ...

PingXing Volmet company

Two Worker Station APG Clamping Machine Epoxy Resin Vacuum Casting Machine
Two Worker Station APG Clamping Machine Epoxy Resin Vacuum Casting Machine

High Efficient Two Worker Station APG Clamping Machine Epoxy Resin Vacuum Casting Machine 1. DVOL-865 Double Automatic pressure gelation clamping machine: DVOL-865 series APG epoxy machine is made up with: -1.APG clamping machine frame (Q235# 10mm steel,machine more ...

PingXing Volmet company

High Quality Epoxy-resin Injection Resin Casting Molding Machine
High Quality Epoxy-resin Injection Resin Casting Molding Machine

High Quality Epoxy-resin Injection Molding Machine Mixed Resin Casting Molding Machine 1.Fully automatic control system with touch screen, Realize one-button run machine: - Automatically clamping mold; - Automatically adjust injection pressure and injection time - Automatically ...

PingXing Volmet company

Supply Epoxy Resin Glue Resin Hardener 38891-59-7 zoe@czwytech.com
Supply Epoxy Resin Glue Resin Hardener 38891-59-7 zoe@czwytech.com

CAS No.:38891-59-7 Other Names:Epoxy Resin Glue,Resin Hardener Place of Origin:China Main Raw Material:Epoxy Usage:Construction, Fiber & Garment, Footwear & Leather, Packing, Transportation, Woodworking, Craft DIY Type:TC110-A,TC110-B Mixing Ratio:1:1 Curing time:5-7hours ...

Cangzhou Wanyou New Material Technology Co.,Ltd.