GF312B portable three phase energy meter calibrator with printer is used to calibrate three phase, single phase, active and reactive energy meters error. And it also can be used as voltage, current and power meter to measure AC parameters of three phase power line. It can measure wave distortion factor and 2nd to 64th harmonic wave. GF312B meter calibrator is used for grid corporation of measurement and energy test center, metrological service of power supply bureau, national energy measurement of testing authorities. It is an ideal testing tool and has been used in more than 80 countries.YOU CAN ALSO LOOK IT IN:
https://www.gfuve.com/energy-meter-calibration/portable-three-phase-electric-meter-calibration-equipment.html
Electrical parameters | |
---|---|
Accuracy | 0.05%, 0.1%, 0.2% |
Power supply | 220V ± 10% or 110V ± 10%, 50/60Hz ± 2Hz |
Test Voltage | |
Range | 0V-600V |
Error |
±0.05% (30V-600V) or ±0.02% (30V-600V) ±0.1% (0.1V-30V) |
Harmonic | 2nd-64st |
Test Current | |
Range (direct connection) | 1mA-12A |
Error (direct connection) |
±0.05% (10mA-12A) ±0.1% (1mA-10mA) |
Range (Clamp CT) | 1mA-3000A |
Clamp on CTs Optional | 5A, 20A, 100A, 200A, 500A, 1000A, 2000A, 3000A |
Error (Clamp CT) |
±0.2% (100mA-3000A) ±0.5% (10mA-100mA) |
Harmonic | 2nd-64st |
Power measure error | |
Active power (direct connection) |
±0.05% (0.01A-12A) ±0.1% (0.001A-0.01A) |
Reactive power (direct connection) | ±0.1% (0.01A-12A) |
Energy measure error | |
Active energy (direct connection) |
±0.05% (0.01A-12A) ±0.1% (0.001A-0.01A) |
Reactive energy (direct connection) | ±0.1% (0.01A-12A) |
Phase angle | |
Range | 0°-360° |
Resolution | 0.001° |
Error | ±0.02° |
Frequency | |
Range | 40Hz-70Hz |
Resolution | 0.001Hz |
Accuracy | 0.001Hz |
Power factor | |
Range | -1 ~ 0 ~ 1 |
Resolution | 0.0001 |
Error | 0. 0005 |
Pulse output | |
Energy constant | 180000imp/kWh, 1800imp/kWh, 18imp/kWh |
Pulse ratio | 1:1 |
Output level | 5V |
Pulse input | |
Input channel | 2 |
Input level | 5-24V |
Input frequency | Max. 2MHz |
Display | |
Resolution | 6.4"TFT (640×480) |
Function | |
Vector diagram | Yes |
Waveform | Yes |
Energy accumulation | Yes |
CT ratio test | Yes |
CT PT programmable | Yes |
CT PT burden test | Yes |
Self-calibration | Yes |
Recorder check | Yes |
Data storage | Yes |
Keyboard | Yes, 24pcs |
smart optical sampler | Yes, 1pc |
Energy pulse cable | Yes, 1pc |
Communication port | RS232, USB |
Communication with PC | Yes |
Standard | |
lsolation protection | IEC 61010-1:2001 |
Energy measurement | IEC/EN 60736; IR46; |
Reference standard |
IEC 62052-11 IEC62053-21 IEC62053-22 & IEC62053-23 IEC61010-1:2001 |
Mechanical parameters | |
Dimensions (W×H×D) (mm) | 390×200×160 |
Host Weight (kg) | 3 |
Weight (including Accessories 3pcs 100A clamp CT) (kg) | 12 |
Environmental conditions | |
Ambient temperature | -10°C to 50°C |
Relative humidity | 15%-95% |
Environmental protection level | IP65 |
The GF302D1 three phase portable energy meter test system consists of an integrated three phase current source(up to 500V/120A or 500V/20A) and built-in three-phase electronic reference standard of accuracy class 0.05%. Characteristic features of the GF302D1 are its wide ...
GF312V2 is light weight and compact high precision reference meter for on-site verification and calibration of single or three phase energy meters. Test voltage and test current for the reference meter will be measured at mains on-site or can be generated and measured via ...