Impact Testing Machine and Drop Impact Test

Impact Testing Machine and Drop Impact Test

227 g Ball Test

2260 g ball test

Test Method for Ball Drop Impact

Glazing Materials Ball Test Device

Determination of whether the safety glazing material has a certain minimum strength and cohesion under impact from a small hard object

Suitable for impact test of safety glass and tempered glass.

Related Standard:

1) ISO 3537 Road vehicles — Safety glazing materials — Mechanical tests– Clause 6: 227 g ball test, Clause 7: 2260 g ball test

2) GB 15763.3 Safety glazing materials in building Part 3: Laminated glass--Appendix B Drop ball impact specimen support

Principle:

Determination of whether the safety glazing material has a certain minimum strength and cohesion under impact from a small hard object

Steel Ball：2260g / 82mm 1040g / 63mm 535g / 51mm 508g / 50mm 227g / 38mm

Drop Height: 1000mm, 5000mm, 12000mm, Customized

Automatic release and lift. Power: 220V 50Hz 580W

Supporting fixture:

a) Support Size: 350mm*350mm and 660mm*660mm (Customized)

b) Frame width 15mm

c) Steel box height 150mm

d) Rubber Gasket: thickness 3mm, width 15mm, hardness shore A50

e) Interposed sheet of rubber: thickness 3mm, hardness shore A50

Applied Test Pieces Size: 300mm*300mm 610mm* 610mm

227 g Ball Test, 2260 g Ball Test, Test Method for Ball Drop Impact, Ball Test, Support Fixture, Support Frame, Safety Glazing Materials Test, Mechanical Test, Drop Ball Impact, Ball Drop, Glass test, Impact Test, Glass Impact

Support Fixture and frame for 227 g ball test and 2260 g ball test of Safety glazing materials. Laminated glass Drop ball impact specimen support. Related standard ISO 3537. Professional impacting testing equipment of Mechanical tests for Building glazing and Road vehicles glazing

This testing device confirms to the standards of ISO3537and GB15763.3. It is applicable for the impact performance test of the equipment enclosure. It has the advantages of accurate performance and convenient operation as well as reasonable layout. Adjusted to a certain height, the steel ball, whose weight is required, falls down to hit the testing sample. Then the tester can judge the quality of the sample according to the damage degree of the testing sample. It can be used in the fastness test of the enclosure with the material of plastic, ceramic, acryl and Glass fiber.