Techwin Fusion Splicer TCW-605E ideal tools for cable construction and maintenance

Techwin Fusion SplicerTCW-605E ideal tools forcableconstruction and maintenance

www.techwin-china.com

wwwdottechwin-chinadotcom

We will try our best to provide products similar to Fujikura Fusion Splicer like Core Alignment Fusion Splicer 90S and The 70R+ mass fusion splicer, and Sumitomo Fusion Splicer like TYPE-72C High Definition Core Aligning Fusion Splicer, T-57 Automatic Adaptive Core Fusion Splicer and T-400S Active Clad Alignment Fusion Splicer., FITEL Fusion Splicer, INNO Fusion Splicer, ILSINTECH Fusion Splicer, FiberFox Fusion Splicer.

Youprobably may visit ourFusion Splicer at some exhibitions such as ConvergenceinIndia, ANGA COM in Germany, OFC in USA, Svaiz ICT in Russia, NETCOM in Brazil and so on.

What is the Product?

TheTCW 605E Series adopt high speed image processing technology and special precision

positioning technology, automatically finish the whole process of fiber fusion in 8 seconds typically, TFT LCD monitor displays all steps of fiber fusion clear at a glance.

What does Fusion Splicer do?

• The TCW605E Series Fusion Splicer have been using inEnglish, Spanish, Portuguese, French, Italian, German, Arabic, Russian, Korea, Japanese, etc.

• Widely used for SM and MM Quartz Fiber with diameter 80-150μm(300μm optional), coating layer diameter 0.1-1.0mm and bare fiber length 16mm more or less.

• Ideal tools for construction and maintenance of fiber and cable in both field and laboratory applications.

Detailed Introduction:

• Not only a Fusion Splicer, but also your partner who make your job easy and happy

• 5.0 inch TFT color LCD monitor with anti-reflective coating

• The advanced core to core fiber profile alignment system(PAS)

• ARC Calibration FREE system.ARC Calibration sub-menu included in the Menu too, can do the ARC Calibration by Manual when necessary

• X/Y axes was displayed or both X and Y were displayed simultaneously, Magnification up to 300 times

• 8 seconds splicing time, 30 seconds Heat-Shrinking

• Battery capacity was display in real time, precisely

• Built-in high capacity battery, support 200 cycles(splicing /tube heating), to meet one days’ work

• Long Electrode Lifetime, up to 4000 times

• The new wind-cover design, enhance the ability to prevent the dust & wind, Max. wind velocity of 15m/s

• Two Splicing modes: auto, manual

Technical Specifications:

• Average Splicing Loss :0.02dB with G.652 and G.657, 0.01dB with G.651 and 0.04dB with G.653 and G.655

• Splicing Time :Typical splicing time:8s

• Heating Time :Typical heating time:30s

• Return Loss :60dB or greater

• Fiber Coating :100μm to 1000μm

• Fiber Cladding :80μm to 150μm(300μm optional)

• Fiber Cleave Length :8～16mm(coating diameter<250µm), 16mm（coating diameter 250～1000µm）

• Heat-Shrinkable Tube :Built-in super High-brightness LED supply convenience for night work