Dead end grip for ACSR
Component
Thimble, Armor rods
Characteristic
1. Stress is distributed equally, without stress focus. It can protect ACSR cables very well.
2. Under the condition of not exceeding the intensity of cable's side pressure, it has higher grip power for the cable, and can support higher tensile force.
3. Simple installation, No special tools needed, and one person can finish the whole installation.
Select Chart
Model no. | LGJ/LGJF GB/T1179-1983 | Conductor Dia | Length(mm) | Weight(kg) | Color code | |
Cross section Al/Steel(mm) | Min(mm) | Max(mm) | ||||
NL-16/3 | 16/3 | 5.17 | 5.79 | 444 | 0.1 | Brown |
NL-25/4 | 25/4 | 6.54 | 7.34 | 546 | 0.1 | Yellow |
NL-35/6 | 35/6 | 7.35 | 8.26 | 622 | 0.2 | Red |
NL-50/8 | 50/8 | 9.26 | 10.39 | 685 | 0.2 | Yellow |
NL-70/10 | 70/10 | 10.40 | 11.68 | 736 | 0.3 | Blue |
NL-50/30 | 50/30 | |||||
NL-70/40 | 70/40 | 13.12 | 14.66 | 876 | 0.6 | Red |
NL-95/15 | 95/15 | |||||
NL-95/20 | 95/20 | |||||
NL-120/7 | 120/7 | |||||
NL-120/20 | 120/20 | 14.67 | 16.59 | 889 | 0.8 | Black |
NL-95/55 | 95/55 | |||||
NL-120/25 | 120/25 | |||||
NL-150/8 | 150/8 | |||||
NL-150/20 | 150/20 | 16.60 | 18.77 | 1016 | 1.1 | Green |
NL-150/35 | 150/35 | |||||
NL-120/70 | 120/70 | |||||
NL-185/25 | 185/25 | 18.78 | 21.26 | 1155 | 1.7 | Orange |
NL-210/10 | 210/10 | |||||
NL-210/35 | 210/35 | |||||
NL-210/50 | 210/50 | |||||
NL-240/40 | 240/40 | 21.27 | 24.05 | 1270 | 2.3 | Blue |
NL-240/55 | 240/55 | |||||
NL-300/25 | 300/25 | |||||
NL-300/40 | 300/40 |
TK Dead-end Guy Grips The specific model name of this product is determined by the specifications, such as AT020133, \"A\" refers to ADSS optical cable, \"T\" refers to the type, \"020\" refers to the span, \"133\" refers to the cable diameter mm. Dead end guy grip or preformed ...
Ground Preformed Strain Clamp Insulated/bare cables 1.Thimble 2.Dead-ends Function Dead-ends are designed to hold insulated cables and bare homogeneous cables in transmission and distribution construction. Mechanical strength for these dead-ends are superior to that of ...
Dead end grip for AAAC,AAC Component Thimble,Amor rods Characteristic 1. Stress is distributed equally, without stress focus. It can protect AAAC/AAC cables very well. 2. Under the condition of not exceeding the intensity of cable\'s side pressure, it has higher grip power for ...
Short Span dead end grip for ADSS(ADN) Component Single layer glue thread, thimble, extension loop, U-shaped hanging loop, bolt, nut etc. Characteristic Simple structures, easy installation, and to lower the costs of the project. Conditions For The Usage Optical cable projects ...
Dead end grip for ACSR Component Thimble, Armor rods Characteristic 1. Stress is distributed equally, without stress focus. It can protect ACSR cables very well. 2. Under the condition of not exceeding the intensity of cable\'s side pressure, it has higher grip power for the ...
Component ly@preformedfittings.com Inner armor rods, outer armor rods, thimble, U-shaped hanging loop, extension loop, bolt, nut, etc. Characteristic 1. Stress is distributed equally, without stress focus. It can protect optical cabl-es very well. 2. Under the condition of not ...
Dead-ends are designed to hold insulated cables and bare homogeneous cables in transmission and distribution construction. Mechanical strength for these dead-ends are superior to that of homogeneous cables. But, for steel-core cables the strength is approx the same as the ...
Double Dead-ends clamp for OPGW (OSNZ) COMPONENT inner armor rods,middle outer outer armor rods, thimble, U-shaped hanging loop, PD hanging board, triangular conjoint board, bolt, nut, etc. CHARACTERISTIC 1. It has all capabilities and performances that dead-end suspension ...
Dead-end clamp for ADSS (ANZ) COMPONENT inner armor rods, outer armor rods, thimble, U-shaped hanging loop, extension loop, bolt, nut, etc. CHARACTERISTIC 1. Stress is distributed equally, without stress focus. It can protect optical cabl-es very well. 2. Under the condition ...