Grade | Chemical composition(%) | ||
NiCrAl | Ni | Cr | Al |
Bal. | 20 | 7 |
Physical Properties
Grade | Density | Melting point |
NiCrAl | 8.3g/cm3 | 1400°C |
Typical Characteristics
Typical Hardness | Bond Strength | Deposit Rate | Deposit Efficiency | Machilityineab |
HRB 85~95 | 9500 psi | 10 lbs/hr/100A | 70 % | Good |
Sizes & Packaging:
Diameter | Packaging | Wire Weight |
1/16" (1.6mm) | MIG (D 300) | 15kg((33 lb)/spool |
Note that special sizes, or packing requirements are available on all requests.
Specifications:
Ni 20Cr 7Al , PWA 36947D for PWA 271-47 Rev H, GEAE , C07-043 for GE SPM 70-49-39, B50TF119-S11/CL D, CFMI CP6037 for 70-48-15, Honeywell FP5045, Type XVIII, Nickel Chromium Aluminum
Description Ni5.5Al5Mois a nickel molybdenum aluminum cored wire specifically designed for arc spraying. It produces dense, well-bonded coatings with excellent wear resistance and good corrosion resistance. It is widely used for machine element repair, dimensional restoration ...
Description NiCTi is a nickel chrome titanium wire specifically designed for arc spraying. It is highly resistant to sulfur and vanadium atmospheres up to 1825 degrees F. It has proven to be particularly effective as a protective arc spraycoating for boiler tubes in black ...
Description FeCrBSi is a cored thermal spray wire used for arc spray systems. It produces a partially amorphous, hard, abrasive and corrosion resistant coating, with a service environment up to 1700° F. High chrome like finishes can be obtained by typical grinding and lapping ...
Description Monel 400 thermal spray wire with a high strength composition of nickel and cooper alloy. It is specifically designed for spraying in arc spray and flame spray systems. It can produces well-bonded coatings with excellent machineability. It is highly resistant to ...
Description Alloy 276 is a high purity nickel-chrome-molybdenum wire , It is designed for arc spraying. It produces dense, well-bonded coatings with good resistance to corrosion, and stress cracking in caustic mediums. Alloy 276 exhibits good abrasion and metal to metal wear ...
Descripction NiAl 80/20 is widely used as bond coat for subsequent thermal spray topcoats and as a one step build up material for dimensional restoration of aircraft engines.It show good resistance to high temperature oxidation and abrasion, and excellent resistance to impact ...
Description Fe-Al is an iron aluminum cored wire specifically designed for arc spray systems. It produces a well bonded coating with high hardness. It has the unique ability to produce either smooth or very rough profile coatings for non-slip applications.Thecoatings have ...
Description Al Bronze alloy produces high tensile strength, low shrink wear resistant, dense coatings. Easily machinable and good for bearing surfaces and machine element work. . It can equivalent to: TAFA 10T, Sulzer Metco Sprabronze AA, 10E Aluminium Bronze. Applications ...