Description
Amorphous Alloy is a cored wire specifically designed for arc spray systems. It produces a partially amorphous, hard, abrasive and corrosion resistant coating, with a service environment up to 1600
degrees F. High chrome like finishes can be obtained by typical grinding and lapping techniques. It has found use in a wide variety of high wear applications, anti-skid surfacing applications, and
corrosive environments. The addition of 9% nickel gives it greater corrosion resistance than 95MXC for most environments. It can equivalent to Tafa 90MXC.
Applications
Boiler Tubes & Tube Shields
Rolls
Anti-Skid
Product Details
Chemical composition
Grade | Chemical composition(%) | ||||||
Amorphous Alloy | Cr | Mo | B | Ni | Si | Mn | Fe |
23 | / | 2 | / | 1 | / | Balance |
Typical Deposit Characteristics
Typical Hardness | Bond Strength | Deposit Rate | Deposit Efficiency | Corrosion Resistance |
HRC 45-50 | 10000 psi | 10 lbs/hr/100A | 80% | Excellent |
Sizes & Packaging
Diameter | Packaging | Wire Weight |
1/16" (1.6mm) | MIG (D 300) | 15kg((33 lb)/spool |
Note that special sizes or packing requirements are available on all requests.
Description Amorphous Alloy is a cored wire specifically designed for arc spray systems. It produces an amorphous, hard, abrasive and corrosion resistant coating, with a service environment up to 1700° F. The inclusion of 2.0% aluminum in the formulation results in extremely ...
Description Monel 400 thermal spray wire with a high strength composition of nickel and cooper alloy. It is specifically designed for spraying in arc spray and flame spray systems. It can produces well-bonded coatings with excellent machineability. It is highly resistant to ...
Description Alloy 276 is a high purity nickel-chrome-molybdenum wire , It is designed for arc spraying. It produces dense, well-bonded coatings with good resistance to corrosion, and stress cracking in caustic mediums. Alloy 276 exhibits good abrasion and metal to metal wear ...
Description Amorphous Alloy is a cored wire specifically designed for arc spray systems. It produces an amorphous, hard, abrasive and corrosion resistant coating, with a service environment up to 1700° F. The inclusion of 2.0% aluminum in the formulation results in extremely ...
Description Stainless steel 18/5 wire specifically designed for arc spraying. It produces dense, well-bonded coatings with excellent machinability and wear and corrosion resistance. SS 185 is widely used for machine element repair, dimensional restoration and wear resistance ...
Description FeCrBSi is a cored thermal spray wire used for arc spray systems. It produces a partially amorphous, hard, abrasive and corrosion resistant coating, with a service environment up to 1700° F. High chrome like finishes can be obtained by typical grinding and lapping ...
Description NiAl 95/5 is a solid thermal spray wires, It can be use as bond coatings and for machine element restoration widely. The materials show an exothermic reaction during the spray process, Also can produce dense coatings with exceptionally high bond strengths that ...