Description
NiCTi is a nickel chrome titanium wire specifically designed for arc spraying. It produces dense, wellbonded
coatings with excellent corrosion resistance and good wear resistance. It is highly resistant to sulfur and vanadium atmospheres up to 1825 degrees F. It has proven to be particularly effective as
a protective arc spraycoating for boiler tubes in black liquor recovery boilers and coal fired utility boilers. It can equivalent to Tafa 45TC, Metco 8500.
Applications
NiCrTi is effective in providing long term protection to boiler tubes against high temperature sulfidation.
Coatings of NiCrTi wire applied to boiler tubes have shown virtually no loss of thickness or spalling after 24 months of service.
Product Details
Chemical composition:
Grade | Chemical composition(%) | ||
Cr | Ti | Ni | |
NiCrTi | 42~46 | 0.3~1.0 | Balance |
Typical Characteristics:
Typical Hardness | Bond Strength | Deposit Rate | Deposit Efficiency | Machilityineab |
HRC 30-35 | 6900 psi(48 MPa) | 11 lbs/hr/100 A | 80~90% | Good |
Sizes & Packaging:
Diameter | Packaging | Wire Weight |
1/16" (1.6mm) | MIG (D 300) | 15kg((33 lb)/spool |
Note that special sizes, or packing requirements are available on all requests.
Description Ni5.5Al5Mois a nickel molybdenum aluminum cored wire specifically designed for arc spraying. It produces dense, well-bonded coatings with excellent wear resistance and good corrosion resistance. It is widely used for machine element repair, dimensional restoration ...
Description NiCTi is a nickel chrome titanium wire specifically designed for arc spraying. It is highly resistant to sulfur and vanadium atmospheres up to 1825 degrees F. It has proven to be particularly effective as a protective arc spraycoating for boiler tubes in black ...
Description FeCrBSi is a cored thermal spray wire used for arc spray systems. It produces a partially amorphous, hard, abrasive and corrosion resistant coating, with a service environment up to 1700° F. High chrome like finishes can be obtained by typical grinding and lapping ...
Description Tung Carbide is a cored wire specifically designed for arc spray systems. It is a titanium and tungsten carbide alloy in an amorphous matrix. Tung Carbide produces a hard, abrasive and corrosion resistant coating, with a service environment of up to 1000° F. Tung ...
Description Amorphous Alloy is a cored wire specifically designed for arc spray systems. It produces an amorphous, hard, abrasive and corrosion resistant coating, with a service environment up to 1700° F. The inclusion of 2.0% aluminum in the formulation results in extremely ...
Description Monel 400 thermal spray wire with a high strength composition of nickel and cooper alloy. It is specifically designed for spraying in arc spray and flame spray systems. It can produces well-bonded coatings with excellent machineability. It is highly resistant to ...