Professional Powder Color Measurement Spectrophotometer
Professional Powder Color Measurement Spectrophotometer is a highly performance with top-port caliber. The instrument adopts the geometric of D/8 illuminant and viewing degree of CIE recommends, integration of the full band LED composite light source, double beam optical system, ETC every-test calibration technology, spectral reflectance standard deviation within 0.08, maximum of colorimetric values ΔE*ab is 0.03, to provide all the necessary color formula. It could be widely used for coating, printing, textile, meet plastic, food, medicine, automobile field to meet customers’ measurement requirement.
Brief Introduction of Powder Color Measurement
1.Our CS-800 is benchtop spectrophotometer with top-port testing caliber.It could not only be used for reflectance measurement for all kinds of materials.Solid samples (steel, cloth) can be placed directly on the measurement port, particles (tablets, master batch), powder (color sand, pigment, coffee), paste objects (tomato sauce) can be placed in a cuvette, and then placed on the measurement port.
2.D\8 Structure
Our device adopts internationally agreed observe condition D/8 (Diffused lighting, 8 degrees observe angle) and SCI(specular reflection included)/SCE(specular reflection excluded).
3.Can Measure SCI and SCE at the same time
4.ETC Technology (Every Test Calibration)
5.Color Quality Control Software
Our spectrophotometer comes with the color QC software, which is applicable in various industries’ quality control and management of color data. It turns color into numerical data, compares color differences, generates measurement reports. provides measurement data under different color spaces and customizes color management for each customer.
7.Powder Color Measurement Technical Data
Type | CS-800 | |
Illumination | d/8(Diffused illumination, 8°viewing) (conform to CIE No.15, ISO 7724/1, ASTM E1164, DIN 5033 Teil7, JIS Z8722 Condition c standards) | |
Size of integrating sphere | Φ40mm,Alvan diffused reflection surface coating | |
Illumination Light source | CLEDs(entire wavelength balanced LED light source) | |
Sensor | dual optical path sensor array | |
Wavelength range | 400-700nm | |
Wavelength interval | 10nm | |
Half spectral width | 5nm | |
Reflectivity range | 0-200% | |
Resolution | 0.01% | |
Observer angle | 2°/10° | |
Measurement Light Source | A,C,D50,D55,D65,D75,F1,F2,F3,F4,F5,F6,F7,F8,F9,F10,F11,F12,DLF,TL83,TL84,NBF,U30,CWF | |
Data being displayed | Reflectance graph/value, chromatic value, color difference values, color assessment results, color tendency, display measurement area, history color value simulation, manual input standard sample, generate measurement reports | |
Measurement time | About 1 second | |
Measurement time interval | 0.5 second | |
Measuring caliber | Φ11mm | |
Color space | CIE-L*a*b,L*C*h,L*u*v,XYZ,Yxy,reflectivity,Hunterlab,Munsell MI,CMYK,RGB,HSB | |
Color difference formulas | ΔE*ab,ΔE*CH,ΔE*uv,ΔE*cmc(2:1),ΔE*cmc(1:1),ΔE*94,ΔE*00,ΔEab(Hunter),555color classification | |
Other colorimetric indices | WI(ASTM E313-00,ASTM E313-73,CIE/ISO,AATCC,Hunter,Taube Berger Stensby), YI(ASTM D1925,ASTM E313-00,ASTM E313-73), Tint(ASTM E313,CIE,Ganz),metamerism index Milm, adhesive/changing color fastness, ISO luminance,8 gloss, A density, T density, E density, M density | |
Repeatability | light splitting reflectivity: standard deviation within 0.08% | |
color values: ΔE*ab<=0.015(After calibration, standard deviation of 30 measurements on test white board, 5 second intervals),Maximum: 0.03 | ||
Battery capacity | rechargeable, 20000 continuous tests, 7.4V/6000mAh | |
Interface | USB | |
Data storage | 40000 test results | |
Light source longevity | 5 years, 1.5 million tests | |
Inter-instrument agreement | ΔE*ab within 0.2 (BCRA color charts II, average of the 12 charts) | |
Size | 350*300*200mm(L*W*H) | |
Weight | 4.5kg | |
Display | 5 inches True color screen | |
Work temperature range | 0~45℃, relative humidity 80% or below(at 35°C), no condensation | |
Storage temperature range | -25℃ to 55℃, relative humidity 80% or below(at 35°C), no condensation | |
Standard accessories | AC power line, operating manual, color QC software, driving software, electric operating manual, USB cable, white/black calibration tile, verification certification | |
Optional accessories | powder molding device, cuvette, shading cover | |
Color matching system | Matches | |
UV light source | without |
Packing:plastic bag with carton box
Packing Size:540x450x310mm
Packing Weight:7kgs
Qty. | Name | Qty. | Name |
1 | Main Instrument | 1 | Power Line |
1 | Operating Manual | 1 | USB Cable |
1 | Driving Software | 1 | Black/White Calibration |
1 | Color QC Software | 1 | Verification Certification |
Our CHNSpec Technology., Ltd is specialized on manufacturing spectrophotometers, colorimeters and gloss meters.Our products have gotten 10 Invention Patents including 1 American Invention Patent, 8 Utility Model Patents, 4 Appearance Patents and 3 Software Copyrights till now. If any need or questions about our products, please do not hesitate to contact me. You are warmly welcome to visit and purchase from us.
Contact Name:Ms. Ivy Zhang
Tel:+86 (0)571-85888707
Cell Phone:+86 18768499725
Skype:ivyzhang2421
What’s app/We chat:+86 18768499725
Q: Are you trading company or manufacturer?
A: We are factory located in Hangzhou city. Welcome to come to visit and purchase from us.
A: Generally it is 1-3 working days if the goods are in stock.If not, we will need 3-15 working days to prepare the products.
A: Yes, and customer need to pay for the freight.
A: Payment is 100% T/T in advance.
A:Our MOQ is 1 set. If you order more than 5 sets, we will give quantity discoun