LVL-100 Series ToughSonic CHEM 10 Chemically Resistant Ultrasonic Level Sensor
Product Quick Detail
- Place Of Origin
- United States
- Brand Name
- Senix
- Minimum Order
- 1
- Packaging
- N/A
- Delivery
- 15 Days
Specifications
ToughSonic CHEM 10 Level Sensor
Liquids or Solids in Chemically Aggressive Environments
CHEM series sensors and SenixVIEW software put the power of ultrasonics in your hands. You can quickly adjust, optimize,
save and clone your applications quickly without calibration!
These sensors are housed in a rugged, chemically inert PVDF sealed housing for long life. They mount above the material surface and measure distance downward without contact. Outputs respond to
that measured distance.
Applications include pump control, bulk inventory, batch processing, water management and high/low level alarms.
Non-Contact Ultrasonic Distance & Level Measurement
Features
Level Measurements
• Long or short measurements
• Unaffected by optical factors like color and transparency
• Computer (PC) software allows remote adjustment
Packaging & Performance
• Durable housing for long life
• Bottom and top thread mounts
• Short & overload protected I/O
• Adjustable filters compensate for tank mixers or turbulence
• Temperature compensation for improved accuracy
• Adjustable sensitivity
Free Functionality
Use adjustable interface features like switch hysteresis and time delays to build complete solutions such as pump controls to maintain level. Save cost by eliminating PLCs, delay circuits and time delay relays!
| Optimum Range | 80 in. (2 m) | Max Range | 10 ft. (3 m) |
| Deadband | Typ. < 4 in. (100 mm) | Adjustment | SenixVIEW software |
| Case Material | PVDF | Configuration | Stored in non-volatile memory |
| Temperature | -40 to 158 ℉ (-40 to 70 ℃) | Outputs | Five selectable, plus serial data |
| Humidity | 0 to 100% operating | Transducer | Rugged piezoelectric |
| Compensation | Temperature compensated | Protection | NEMA-4X, NEMA-6P, IP68 |
| Resolution | Digital:0.0034 in. (0.086 mm); Analog:4099 steps (0-10 VDC), 3279 steps (4-20 mA) | ||
| Repeatability | Greater of +/-0.03 in. (0.76 mm) or 0.2% of target distance in stable environment | ||
| Update Rate | 20 Hz (50 ms), SenixVIEW adjustable; affected by SenixVIEW filter selections | ||
| Input Power | 10-30 VDC, 50 mA maximum (not including output currents) | ||
| Voltage Output | 0-10, 0-5 VDC or PC customized; 10 mA max. (*) | ||
| Current Loop #1 | Current sourcing 4-20 mA or PC customized, max. loop 450Ω(*) | ||
| Current Loop #2 | Current sinking 4-20 mA or PC customized, max. loop 450Ω(*) | ||
| Sinking Switch | 150 mA max. @ 40 VDC max., teachable set point & polarity, fault indication | ||
| Sourcing Switch | 150 mA max. @ input voltage, teachable set point & polarity, fault indication | ||
| RS-232, RS-485 | Modbus protocol, 9600-115200 baud (selectable), 8 data bits, 1 stop, no parity | ||
| Target Requirements | |||
| Target | Detects flat or irregular surfaces. Target surface must reflect sound back to sensor. | ||
| Max. Distance |
Affected by size, shape, orientation of target (sound level reflected back to sensor), environment
Restrict use to Optimum Range when using over a wide range of environmental conditions |
||
| Granular Solids | De-rate max range by 50%; range affected by material density and orientation | ||
| Orientation | Orient sensor beam perpendicular to target surface for best performance |
| Cable Connection | Wire | Description |
| Power | Brown | 10-30 VDC, 50 mA maximum; Typical:45 mA @ 24 VDC (**) |
| Ground | Blue | Power and interface common |
| Voltage Output * | Violet | 0-10 VDC, 0-5 VDC or custom end values between 0 and 10 VDC |
| Current Loop Output * | Green | 4-20 mA sourcing (adjustable end values between 4 and 20 mA) |
| Current Loop Output * | Orange | 4-20 mA sinking (adjustable end values between 4 and 20 mA) |
| Switch #1 Output | Black | Sinking ("NPN") or Sourcing ("PNP"), user selected |
| Switch #2 Output | White | Sinking ("NPN") or Sourcing ("PNP"), user selected |
| RS-232 out / RS-485- | Gray | Serial data connection (depends on model - see model selection) |
| RS-232 in / RS-485+ | Yellow | Serial data connection (depends on model - see model selection) |
(**) At default update rate. Output currents not included. Sensitivity reduced below 15 VDC input voltage.
| Model Number | Description |
| LVL-100-232 | Serial RS-232 interface (PC COM port compatible) |
| LVL-100-485 | Serial RS-485 interface (allows addressable multi-sensor networks) |
| Senix also offers interconnection, communication, mounting, and display components |
- Country: China (Mainland)
- Business Type: Distributor/Wholesaler
- Market:Europe, America, etc
- Founded Year:2014
- Address:sales@isweek.com
- Contact:zy
You may also like
Send inquiry / quota request to LVL-100 Series ToughSonic CHEM 10 Chemically Resistant Ultrasonic Level Sensor
Other products from Week Technology LTD
Relate products of LVL-100 Series ToughSonic CHEM 10 Chemically Resistant Ultrasonic Level Sensor
ToughSonic CHEM 35 Level Sensor Liquids or Solids in Chemically Aggressive Environments CHEM series sensors and SenixVIEW software put the power of ultrasonics in your hands. You can quickly adjust, optimize, save and clone your applications quickly without calibration! These ...
