Usage:
Widely Used in Distribution Transformer, Dry Transformer,Reactor and Similar Process of HV Coil Winding.
Composition:
Winding Host
Automatic Wire Guide Traversing Mechanism
Insulation Layer Decoiler
Round Wire and Flat Wire Decoiler with Tension Control
PLC Control
Operation Touch Screen
Pneumatic System and Foot Pedal
technical parameter:
Model | GRX-800 |
General | |
Dimension | 2350×1100×1100mm |
Weight | 1600kg |
Power supply | 380v/50hz |
Whole power | 5 KW |
Coil | |
Coil diameter | 80-600mm |
Coil width (Max) | 800mm |
Coil weight(Max) | 500kg |
Coil cross section | Round,oval,rectangle |
Conductors | |
Round wire diameter | Φ0.3mm—Φ3mm |
Flat wire | 3×12mm |
Description: HAO-130 automatic transformer winding machine for current transformer is the new generation of winding equipment according to the power industry requirement and present manual winding technology of current transformer. Automatic transformer winding machine unique ...
Description: Transformer coil winding machine for voltage transformer is the special device designed according to the technology requirements of domestic enclosed voltage transformer secondary coil. Transformer coil winding machine is the effective attempt for realizing the ...
Main technical parameters Model -450J VOL-240J VOL-360J Nominal diameters of enameled wire φ0.1~1.5mm φ0.1~1.5mm φ0.1~1.5mm Max rotation diameter of coil φ450mm φ240mm φ360mm Min rotation diameter of coil φ50mm φ50mm φ50mm Max winding breadth 400mm 210mm 350mm Winding ...
1.Distance of disc. center from floor: 1210mm. 2.Disc. dia.: Ф560mm. 3.Max. pitch of strand: 600kg , max. torque (8r/m)6000Nm, min. wrest torque(40r/m) 2500Nm. 4.Max. load: 650kg. 5.4 kinds of speed range: 0-8, 0-16, 0-20, 0-40r/m. 6.Each speed starts from 0r/m ...
It mainly consists of automatic dereeler, main winding machine and control system etc. The wire coil winding machine is used to wind the wire or conductor on the iron core into a coil. This machine is special, it can realize to wind the wire or conductor on the iron core ...
The horizontal winding machine is used to make distribution transformer coils. One or multiple flat wire conductors in parallel are wound on the winding mandrel via the wire dereelers, and then the winding coil is obtained as winding technology. We can supply all necessary ...