Description In the GYTA cable, single-mode/multimode fibers are positioned in the loose tubes, the tubes are filled with water blocking filling compound Tubes and fillers are stranded around the strength member into a circular cable core. An APL/PSP is applied around the core. Wh
Hunan Guanglian Photoelectricity Technologies Co., Ltd. [2018-04-10 09:27:04 ]
The single mode optical fiber cable herein after referred to as the “Cable”comply with the requirements of this specification and generally meet ITU-T Recommendation G.652 G.652 covers single-mode NDSF (non-dispersion-shifted fiber) which is optimized for 1310nm wavelength.
Hunan Guanglian Photoelectricity Technologies Co., Ltd. [2018-04-09 18:39:17 ]
Product Description The single mode optical fiber cable herein after referred to as the “Cable”comply with the requirements of this specification and generally meet ITU-T Recommendation G.652 G.652 covers single-mode NDSF (non-dispersion-shifted fiber) which is optimized for
Hunan Guanglian Photoelectricity Technologies Co., Ltd. [2018-04-09 18:35:49 ]
ftth fiber optic drop wire outdoor Cross-sectional drawing ftth fiber optic drop wire outdoor characteristics - Special curved optical fiber, providing greater bandwidth and enhanced network transmission characteristics; - Two parallel fiber optic cable, FRP(or steel ) strength m
Hunan Guanglian Photoelectricity Technologies Co., Ltd. [2018-04-09 18:12:36 ]
AISG connector is widely used in medical, sensor, automation, communication and other fields, especially suitable for 3G electric antenna, tower and base station equipment. SHENZHEN KEXINT TECHNOLOGY CO.,LTD i s a high-technology enterprise devoted to optical fiber and network co
SHENZHEN KEXINT TECHNOLOGY CO.,LTD [2017-12-21 19:18:27 ]
The working principle is that the two optical fiber section with the melting of high precision motion gently pushing to make two fused into a high-pressure arc, in order to realize the coupling of optical fiber mode field Mainly used in telecom operators.
SHENZHEN KEXINT TECHNOLOGY CO.,LTD [2017-12-21 19:17:40 ]
Quick Information Brand Name feiniu Place of Origin China Model Number 015 Application Industrial Conductor Material Aluminum Insulation Material PVC Jacket Rubber Type High Voltage Description All Dielectric Self Supporting Optical Fiber Cables ADSS Cable
Shijiazhuang City Feiniu Cable Co.,ltd [2017-12-09 15:22:06 ]
Quick Information Brand Name feiniu Place of Origin China Model Number 014 Application Industrial Conductor Material Aluminum Insulation Material Rubber Jacket PVC Type Low Voltage Description fiber optic cable factory price outdoor cable manufacturer ADSS cable also known
Shijiazhuang City Feiniu Cable Co.,ltd [2017-12-09 15:21:07 ]
Fiber Laser Marking Fiber laser used long double cladding fiber as the gain medium, by high-power multimode laser diode pumped laser, resulting in optical fiber waveguide stimulated oscillation increase, and small loss, good stability and is not influenced by the external dust an
GEM LASER LIMITED [2017-11-26 22:26:52 ]
A specially designed crosslinked Clear Heat Shrinkable tubing, with Clear fusion tubing liner, providing SS304 strength member and protection to fiber optical splices. Features Single holed(preshrunk)ends eliminates improper fiber threading Smooth,deburred stainless steel reinfor
SHENZHEN KEXINT TECHNOLOGY CO.,LTD [2017-11-14 17:18:37 ]
Product introduction Length 40MM\\ diameter 13MM Cycle test (-40-+80 C) Change less than 0.2dB The operation is convenient and visual, and can be observed by naked eyes It can be used repeatedly, and single / multi-mode fiber can be used. Small loss and good reflection suppressio
SHENZHEN KEXINT TECHNOLOGY CO.,LTD [2017-11-14 17:18:05 ]
Product Description Optical fiber adapter (flange) is a fiber-optic connectors on the Events connected components. Optical fiber adapter products including FC, SC, ST, LC, MTRJ, MU, E2000. Widely uses in optical fiber distribution frame (ODF), the fiber optic communications equip
SHENZHEN KEXINT TECHNOLOGY CO.,LTD [2017-11-14 17:17:17 ]
Media Converter extends the network transmission range from 100m to 100Km (single mode optical fiber). Its typical application is Ethernet long range interconnection, such as the interconnection between the equipment room of community with MAN. No configuration of the switch is n
SHENZHEN KEXINT TECHNOLOGY CO.,LTD [2017-11-14 17:03:20 ]
Large Capacity Data Center Integrated Network Cabinet support large, modular network switches by providing additional space for cable management and side-to-side airflow solutions. It covers an area of 2000 square meters. T he company has precise manufacturing & testing equipment
SHENZHEN KEXINT TECHNOLOGY CO.,LTD [2017-11-14 17:02:52 ]
An optical fiber cable, also known as fiber optic cable, is an assembly similar to an electrical cable, but containing one or more optical fibers that are used to carry light. The optical fiber elements are typically individually coated with plastic layers and contained in a prot
SHENZHEN KEXINT TECHNOLOGY CO.,LTD [2017-11-14 17:00:57 ]
Optic distribution frame can be used in the termination and distribution of partial trunk optical cable in optical cable communication system,easy to realize connection,distribution and adjustment. It covers an area of 2000 square meters. T he company has precise manufacturing &
SHENZHEN KEXINT TECHNOLOGY CO.,LTD [2017-11-14 16:58:59 ]
Optical switch is a kind of optical path controlling device, with the ability to control and switch the optical path. It is significant in optical communications, mainly used for multi-channel fiber monitoring in optical transmission system, LAN multi light source/detector automa
SHENZHEN KEXINT TECHNOLOGY CO.,LTD [2017-11-14 16:57:57 ]
A fiber optic coupler is a device used in optical fiber systems with one or more input fibers and one or several output fibers. Light entering an input fiber can appear at one or more outputs and its power distribution potentially depending on the wavelength and polarization. Suc
SHENZHEN KEXINT TECHNOLOGY CO.,LTD [2017-11-14 16:50:52 ]
A fiber optic splitter, also known as a beam splitter, is based on a quartz substrate of an integrated waveguide optical power distribution device, similar to a coaxial cable transmission system. The optical network system uses an optical signal coupled to the branch distribution
SHENZHEN KEXINT TECHNOLOGY CO.,LTD [2017-11-14 16:49:12 ]
Fiber Optic Fast Connector designed for FTTH is a new generation of fiber connector used in assembly. It can provide Open flow and Precast type of products, whose optical and mechanical specification meets the standard optical fiber connector. It is designed for high quality and
SHENZHEN KEXINT TECHNOLOGY CO.,LTD [2017-11-14 16:29:03 ]
