Both Spectral and Photometric test on 350~800nm, SMA905 optical fiber to Integrating Sphere and USB connect to PC, it can do the LED Optical Maintenance test such as flux VS time or CCT VS time
LISUN GROUP in SHANGHAI [2023-06-20 13:59:27 ]
LPCE-2 Integrating Sphere Spectroradiometer LED Testing System is for single LEDs and LED lighting products light measurement. LED’s quality should be tested by checking its photometric, colorimetric and electrical parameters. According toCIE 177 System Configuration High Preci
Lisun Instruments Ltd [2021-05-13 14:30:33 ]
LPCE-3 is a CCD Spectroradiometer Integrating Sphere Compact System for LED Testing. It is suitable for single LED and LED luminaires\' photometric, colorimetric and electrical measurement. The measured data meets the requirements ofCIE 177 System Configuration CCD Spectroradiome
Lisun Instruments Ltd [2021-05-13 14:28:39 ]
LPCE-3 is a CCD Spectroradiometer Integrating Sphere Compact System for LED Testing. It is suitable for photometric and colorimetric measurement of luminaries such as LEDs, LED luminaires, Energy-saving lamps, Fluorescent lamps, HID lamps (high voltage sodium l System Configurati
Lisun Instruments Ltd [2019-11-27 11:29:13 ]
LPCE-2 is an Integrating Sphere Spectroradiometer LED Testing System for single LEDs and LED lighting products light measurement. LED’s quality should be tested by checking its photometric, colorimetric and electrical parameters. According to CIE127-1997, IES LM-79-08 and IES L
Lisun Instruments Ltd [2019-11-27 11:27:20 ]
LSG-1800BCCD Goniospectroradiometer is high precision automatic goniophotometric instrument for luminous intensity distribution measurements with facility for turning the light source. The LSG-1800BCCD can do the spatial CCT test when do the intensity distribution test. It is for
Lisun Instruments Ltd [2019-11-27 11:24:21 ]
LSG-5000 Moving Detector Goniophotometer completely meets LM-79 Clause 9.3.1 and EN13032-1 clause 6.1.1.3 goniophotometer type 4 requirements. The LSG-5000 is an automatic light distribution intensity 3D curve testing system for measuring light. The m Measurement Luminous Intensi
Lisun Instruments Ltd [2019-11-27 11:20:39 ]
LPCE-3 is a CCD Spectroradiometer Integrating Sphere Compact System for LED Testing. It is suitable for photometric and colorimetric measurement of luminaries such as LEDs, LED luminaires, Energy-saving lamps, Fluorescent lamps, HID lamps (high voltage sodium l System Configurati
Lisun Instruments Limited [2019-11-12 17:02:16 ]
LPCE-2 is an Integrating Sphere Spectroradiometer LED Testing System for single LEDs and LED lighting products light measurement. LED’s quality should be tested by checking its photometric, colorimetric and electrical parameters. According to CIE127-1997, IES LM-79-08 and IES L
Lisun Instruments Limited [2019-11-12 16:57:04 ]
LSG-1800BCCD Goniospectroradiometer is high precision automatic goniophotometric instrument for luminous intensity distribution measurements with facility for turning the light source. The LSG-1800BCCD can do the spatial CCT test when do the intensity distribution test. It is for
Lisun Instruments Limited [2019-11-12 16:53:52 ]
LSG-5000 Moving Detector Goniophotometer completely meets LM-79 Clause 9.3.1 and EN13032-1 clause 6.1.1.3 goniophotometer type 4 requirements. The LSG-5000 is an automatic light distribution intensity 3D curve testing system for measuring light. The m Measurement Luminous Intensi
Lisun Instruments Limited [2019-11-12 16:48:53 ]
Product Description ESD61000-2 ESD Tester for Testing LEDs, LED Display and LCD TV According to IEC/EN61000-4-2 Standard with Maximum 30KV Output Introduction ESD61000-2 Electrostatic Discharge Simulator they equipped with an infrared remote control allow you do the test in some
Lisun Electronics Inc. [2019-09-04 16:43:52 ]
Product Description WT2080 LED Power Driver Test Instrument is the comprehensive test instrument for LED drive power which is according to GB/T 24825-2009 and IEC 62384 2006. It can measure the following parameters Input Characteristics Test (AC&DC), Output Characteristics Test (
Lisun Electronics Inc. [2019-09-04 16:41:23 ]
Product Description LVD-100KG vertical & horizontal tester to do electrodynamic vibration measurement comply with IEC standards introduction LVD-100KG Electrodynamic Vibration Generator System is complied with GB2423, IEC68-2-6, JJG189-97, GB/T13309-91 etc. Full-function computer
Lisun Electronics Inc. [2019-09-04 16:39:03 ]
Product Description The Salt Spray Test Machine Model Work Room Size (mm) Exterior Size (mm) Voltage Power (KW) YWX/Q-150 600x450x400 1100x750x930 1Phase/220V 2.5 YWX/Q-250 900x600x500 1500x900x1150 1Phase/220V 3.5 YWX/Q-750 1100x750x500 1700x1050x1150 1Phase/220V 4.5 YWX/Q-010 1
Lisun Electronics Inc. [2019-09-04 16:36:41 ]
Product Description The Dustproof Test Chamber SC-015 is according to IEC60529, GB2423.37-89 (Test L dust test methods), GB 4208-93 protective casing grade (IP code), GB/T 4942.2-93(protective casing grade of low-voltage apparatus), GB 7000.1-1996, GB 7001-1986(protective casing
Lisun Electronics Inc. [2019-09-04 16:33:55 ]
Product Description JL-X waterproof test system is according to IEC60529, IEC60598, IEC60335 and IEC 60034-5 2000. The JL-X includes the following test grades IPX1, IPX2, IPX3, IPX4, IPX5, IPX6, IPX7 and IPX8 (Refer to page 51 of IEC60529). It is widely used in the authentication
Lisun Electronics Inc. [2019-09-04 16:31:06 ]
Product Description It is according to IEC60068-2-1 (GB/T2423.1) and IEC60068-2-2 (GB/T2423.2). It is used to test the CFL/LED which meets IES LM-80-08, electricity products, electronic components, material and so on. Specification •The chamber is produced by SUS304 Steel, the
Lisun Electronics Inc. [2019-09-04 16:28:28 ]
Product Description The LS9955/LS9956 Automatic Safety Test System is according to GB4706.1, IEC/EN60335-1, UL60335, GB7000, IEC60598, GB4943, IEC60950 and GB9706.1. It used for luminaries, home application and motor tools safety test in production line or Lab R&D. Specification
Lisun Electronics Inc. [2019-09-04 16:25:43 ]
Product Description EMI-9KB is an automatic EMI receiver system. It is a main test system for EMI (Electro Magnetic Interference) testing. The EMI-9KB is produced by the full closure structure and strong electro-conductibility material, which has high shielding effect. Due to the
Lisun Electronics Inc. [2019-09-04 16:21:38 ]
