Name Hydroxy Terminated Polydimethylsiloxane (Methyl Silicone Oil) Melt Point (℃) -59 Spontaneous combustion point (℃) 450 Saturated vapor pressure (KPa) No Data Explosive No Data Solubility Soluble in benzene, toluene, ethylene, ethyl ether, partially soluble in ethanol, but
Zhongtian East Fluorine Silicon Material Co., Ltd [2023-09-06 14:23:27 ]
BUTTERFLY VALVES MstnLand provides high performance water butterfly valve products, including Hard seal and soft seal butterfly valve, triple offset/double offset/centric butterfly valve, Lug type /Wafer type/Hoop type/Flanged ended butterfly valve and three-way butterfly valve.
MSTN International Technologies Company [2023-09-06 14:22:10 ]
BRASS BALL VALVES Brass ball valves refer to ball valves made of brass material, namely the valve body is brass. Brass is the alloy that is made up of copper and zinc. It is called normal brass if it is made up of copper and zinc only. However, it is called special brass if it is
MSTN International Technologies Company [2023-09-06 14:21:42 ]
Name Methyl Vinyl Silicone Rubber Feature High temperature resistant Appearance Colorless and transparent, no obvious mechanical impurities Application of Methyl Vinyl Silicone Rubber ZT-110 Methyl Vinyl Silicone Oil Rubber can be widely used in various fields of silicone compoun
Zhongtian East Fluorine Silicon Material Co., Ltd [2023-09-06 14:21:28 ]
Name Methyltrichlorosilane (M1) Feature This product is a colorless transparent liquid. It is the main material of silicone products to produce methyltriethoxysilane and silane crosslinking agent (methyl triethoxysilane and methyltrimethoxysilane), and produce silicon resin, spec
Zhongtian East Fluorine Silicon Material Co., Ltd [2023-09-06 14:20:55 ]
Name Fumed silica Appearance Fluffy white powder. Technical Data of Fumed Silica Item Indexes The nitrogen adsorption specific surface area/（m2/g） Typical values±30 Loss on ignition/% ≤ 2.5 Silica content/% ≥ 99.8 Suspension PH 3.7~4.5 Al2O3 content/（mg/kg） ≤ 400 T
Zhongtian East Fluorine Silicon Material Co., Ltd [2023-09-06 14:19:31 ]
CSA Binder Introduction Calcium Sulfoaluminate binder is pure CSA clinker that grinded without any gypsum. It is a hydraulic cementitious material blend high in C4A3S (Calcium Sulfoaluminate Crystals). CSA Binder characteristics • Appearance light grey powder • Rapid strength
OREWORLD TRADE(TANGSHAN) CO., LTD. [2023-09-06 13:50:09 ]
Description of High Temperature Alumina Cement Calcium aluminate cement, alumina cements or high alumina cements are obtained by the reaction at high temperature of lime (from limestone) and alumina (contained in natural minerals like bauxite). The aluminate cement obtained after
OREWORLD TRADE(TANGSHAN) CO., LTD. [2023-09-06 13:49:06 ]
What is High Alumina Cement High Alumina Cement (HAC, sometimes known as calcium aluminate cement (CAC) or aluminous cement) is composed of calcium aluminates, unlike Portland cement which is composed of calcium silicates. It is manufactured from limestone or chalk and bauxite. H
OREWORLD TRADE(TANGSHAN) CO., LTD. [2023-09-06 13:48:05 ]
CSA (Calcium Sulfoaluminate Cement) cement is a special cement used in many applications where early high strength and fast setting development are necessary. CSA cement is short for Calcium Sulfo-aluminate Cement, also named rapid setting cement, high strength cement, fast harde
OREWORLD TRADE(TANGSHAN) CO., LTD. [2023-09-06 13:46:54 ]
Amorphous Calcium Aluminate Details The mineral of amorphous calcium aluminate (non-crystalline calcium aluminate) is C12A7. The alumina content is about 50%. However, the appearance of amorphous calcium aluminate is different from crystaline calcium aluminate or CA. It looks lik
OREWORLD TRADE(TANGSHAN) CO., LTD. [2023-09-06 13:45:45 ]
What Is CSA Cement? CSA (Calcium Sulfoaluminate Cement) cement is a special cement used in many applications where early high strength and fast setting development are necessary. cement CSA is short for calcium sulphoaluminate cement, also named rapid setting cement, high strengt
OREWORLD TRADE(TANGSHAN) CO., LTD. [2023-09-06 13:45:01 ]
TSP diamond is made of diamond micro powder and a small amount of binder sintered under high temperature and high pressure. It has high wear resistance, strong impact toughness, good thermally stability, and dense structure, and is widely used in the manufacture of petroleum, geo
Henan E-Grind Abrasives Co., Ltd. [2023-09-06 11:36:02 ]
E-Grind is a professional PCD wire drawing dies supplier and manufacturer, we provide two series of Diamond Wire Drawing Die Blanks CDB Series and TDBY Series. 5 grades of grain size available 3 microns, 5 microns, 10 microns, 25 microns and 50 microns. What is PCD Wire Drawing D
Henan E-Grind Abrasives Co., Ltd. [2023-09-06 11:35:40 ]
E-Grind produces high-quality Polycrystalline diamond composite(PDC) and polycrystalline diamond compact cutters. Polycrystalline diamond composite(PDC China) sheet is made of diamond particles and cemented carbide matrix sintered at 60,000 atmospheres, high temperature and high
Henan E-Grind Abrasives Co., Ltd. [2023-09-06 11:35:18 ]
As one of the most professional abrasive powder suppliers in China, E-Grind offers a full range of superabrasives Synthetic diamond, Cubid Boron Nitrid and related Solid products like CVD, TSP, PDC, PCD&PCBN, Diamond Wire-Draing Die blanks, for Drilling, Sawing, Cutting, Grinding
Henan E-Grind Abrasives Co., Ltd. [2023-09-06 11:34:57 ]
E-Grind supplies the whole range of PCD blanks and PCD PCDN for cutting tool purpose. The largest Diameter of PCD blanks and PCDN blanks available can be 55mm. Our PCD blanks and PCDN blanks provide high wearing resistance ability and high finishing surface. Application of PCD Bl
Henan E-Grind Abrasives Co., Ltd. [2023-09-06 11:34:37 ]
E-Grind\'s metal bond micron products offer good Roughing, Lapping and finishing results. For resin bond, vitrified bond, and electroplated bond. Application of micron diamond powder for stone, watch, optical glass, etc. Types of Metal Bond Micron Diamond for Sale Micron Diamond
Henan E-Grind Abrasives Co., Ltd. [2023-09-06 11:34:11 ]
E-Grind\'s metal bond mesh diamond combines both using life and working efficiency. Suitable for resin bond, vitrified bond, metal bond, and electroplated bond system. Application glass, PCD/PCBN, dental tools, gemstone Metal Mesh Bond Diamond for Sale Metal Bond Mesh Diamond EA-
Henan E-Grind Abrasives Co., Ltd. [2023-09-06 11:33:47 ]
TP400 cable probe system mainly used in various specifications of CNC grinding machines, CNC lathes, and especially measuring devices. TP400 CNC digitizing cable probe system includes a TP400 trigger probe unit, two four-core, oil-proof shielded cables,s and standard measuring so
Harbin Pioneer M&E Technical Development Co., Ltd [2023-09-06 11:24:19 ]
