HF RFID Antenna (13.56MHz)

RFID HF Antenna (13.56MHz) The production process of Novatron\'s antenna products is mainly to etch aluminum foil into the shape required by customers on a soft PET film substrate. The frequency range of this section is HF. High-purity aluminum foil is used as the conductor mater

Novatron Electronics(Hangzhou)Co.,Ltd      [2024-03-01 11:35:17 ]

SFP 1.25G 1550nm 80Km LC Transceiver

GearLink’s gigabit optical transceiver module GCS7L0C55 is used in Gigabit Ethernet, dual-channel, and bidirectional transmission synchronous optical network (SONET). The compatible optical transceiver conforms to SFP multi-source protocol and SFF-8472, with digital diagnostic

Wuhan Gearlink Technology Co., Ltd.      [2024-02-18 15:21:54 ]

SFP 1.25 G 1310nm 10Km LC Transceiver

GearLink\'s gigabit fiber optic transceiver GCS3L0C31 is used in Gigabit Ethernet, dual-channel, and bidirectional transmission synchronous optical network (SONET). SFP 1.25 g 1310nm 10km transceiver conforms to SFP multi-source protocol and SFF-8472, with digital diagnostic moni

Wuhan Gearlink Technology Co., Ltd.      [2024-02-18 15:20:59 ]

ADSS Cable

Our adss fiber optic cable is used for overhead power lines,and together with the high voltage power line in the same road,, mainly used for high voltage overhead line communication route. In addition, the cable is in high voltage and strong current environment, must be able to w

HENAN HONREY CABLE CO.,LTD      [2024-02-01 11:57:32 ]

CWDM single device 1×2

CWDM single device 1×2(3 ports) can effectively save fiber resources and networking costs. It solves the two problems of fiber shortage and transparent transmission of multiple services. It is mainly used in the convergence and access layer of the metropolitan area network. It c

Nanning Xionghua Photoelectric Technology Co., Ltd.      [2024-01-31 10:37:13 ]

1X4 MEMS optical switch

MEMS optical switch 1X4 are based on microelectromechanical systems technology. By rotating the mirror of the MEMS chip, channel selection is allowed between one input fiber and N output fibers. This switch is bidirectional and can also be used as an Nx1 selector switch. It has t

Nanning Xionghua Photoelectric Technology Co., Ltd.      [2024-01-30 10:45:53 ]

400G QSFP-DD LR4 10KM LC Optical Transceiver

400G QSFP-DD LR4 10KM LC Optical Transceiver Product Model EQD4xx40X-3LCD10 Data Rate 400Gbps Distance 10km Connector LC Fiber Type SM DDM YES Brand ETU-LINK Place of origin Made in China Shipping Port ShenZhen Package type 10PCS/Tray Features 400G-LR4-10 QSFP-DDTransceiver Ø Co

ETU-Link Technology Co., LTD      [2024-01-25 16:57:09 ]

Optical Fiber Adapter

A fiber optic patch cord adapter is also called fiber optic coupler, which is a small component designed to connect optical fiber cables or connectors between two fiber optic lines. It is usually in the application of optical distribution frame, to link fiber optic equipment and

Shenzhen Puhuixin Tecnhnology Co., Ltd.      [2024-01-19 15:04:14 ]

ODVA Outdoor Cable Assembly

Cost-effective solution for in-house termination. Low insertion loss and added loss. Height of attenuation. IP67 water, dustproof and corrosion-resistant. Plug has a tolerance-free design, free-floating on Z-axis. The material in the jumper cable is all-weather and UV-resistant.

Shenzhen Puhuixin Tecnhnology Co., Ltd.      [2024-01-19 15:03:20 ]

648 Core Three-network Integrated Optical Cable Cabinet ODF Optical Cable Cabinet

Optical Distribution Frame Definition The wiring box adopts a drawer-type structure, that can be drawn out during operation, put back after completion. The use of galvanized cold-rolled steel plate and surface spraying process, optical fiber distribution plate using doped anti -

Shenzhen Puhuixin Tecnhnology Co., Ltd.      [2024-01-19 15:02:57 ]

NSN Boot Dulex LC Fiber Optic Jumper

Easily add/install jumper cables for a future expansion. Low insertion loss and added loss. Height of attenuation. Flexibility with a small bending radius and excellent cable routing properties. End-face geometry and quality are superior to IEC and Telcordia standards. The materi

Shenzhen Puhuixin Tecnhnology Co., Ltd.      [2024-01-19 15:02:25 ]

4CH CWDM Mux Demux

CWDM Coarse Wave Division Multiplexing (CWDM) Multiplexer/Demultiplexer (MUX/DEMUX) modules support ITU-T G.694.2 wavelengths between 1270nm to 1610nm in 20nm increments. CWDM/X modules are protocol and rate transparent allowing different services up to 10Gbps to be transported a

Guangzhou Sintai Communication Co., LTD      [2024-01-12 11:17:56 ]

100G Transponder

6 Channels 40G&100G Transponder 40G&100G OTU service card launched by Sintai Communication Co., Ltd. supports three 40G or 100G service access. Its main function is to perform 3R regeneration of three 40G or 100G service signals that are accessed and can be transformed into three

Guangzhou Sintai Communication Co., LTD      [2024-01-12 11:17:41 ]

40km Dispersion Compensation Fiber

In optical fiber communications, dispersion compensation modules (DCM) (also called dispersion compensation units, DCU) can be used for compensating the chromatic dispersion of, e g., a long span of transmission fiber. Typically, such a module provides a fixed amount of dispersio

Guangzhou Sintai Communication Co., LTD      [2024-01-12 11:17:27 ]

2U Platform

2U DWDM/CWDM Optical Transport System The integrated DWDM/CWDM platform of OTNS8600 II type optical transmission network system is mainly used in metro area nodes, and it solves the following shortage of fiber resources below the metro area network, completes a unified load and f

Guangzhou Sintai Communication Co., LTD      [2024-01-12 11:16:44 ]

Caltta PM790 DMR Mobile Radio

Caltta PM790 is a professional mobile radio with an ergonomic design, rich digital functions, and rugged quality. It provides a user-friendly interface and keypad for easy operation. It is the ideal solution for in-vehicle or desktop communication. Features of PM790 DMR Mobile Ra

Caltta Technologies Co., Ltd.      [2024-01-10 10:43:14 ]

Waterproof Pre-Terminated Fiber Optical Pigtail SC LC Connectors for CATV

UnitekFiber Waterproof Pre-terminated Fiber Optical pigtail is to connect the optical node to the backbone fiber in CATV system. Its design fits Aerial, Base station, and Vault applications The cable is with a rotational nut to avoid cables twists and enables a quick and easy ins

ShenZhen UnitekFiber Solution Limited      [2024-01-05 10:03:39 ]

Best Aerial Fiber Cables|Outdoor GYTC8S Fiber Optic Cable 24 Cores G652D Self-supporting Figure 8 Jacket PE

Aerial Self-supporting figure 8 fiber optic cable is a stranded multi loose tube fiber cable. The fiber core is up to 288cores. The center of the GYTC8S self-supporting figure-eight fiber optic cable core is a metal reinforcing core. The loose tube (and filling rope) is twisted a

ShenZhen UnitekFiber Solution Limited      [2024-01-05 10:01:13 ]

JL1 Satellite Services

The technical index and function mode in terms of satellites research are taking the leading position in the world. Various satellite services such as imagery data, remote sensing application and satellite systems form a complete satellite service network of JL1 constellation CHA

Chang Guang Satellite Technology Co., Ltd.      [2024-01-02 14:30:02 ]

Satellites Data Service

At present, JL1 constellation has 72 on-orbit satellites in space and more than 5,000,000 square kilometers of new shooting area in the world are added every day. SATELLITES DATA SERVICE-A NEW WAY TO OBSERVE OUR PLANET Archived data The satellite data service refers to providing

Chang Guang Satellite Technology Co., Ltd.      [2024-01-02 14:28:08 ]