Telecommunications Manufacturers and Suppliers

Total 42158 products found
ABS box Multimode PLC Splitter

ABS box Multimode PLC Splitter ABS PLC splitter is commonly used in PON network, and has a good protective effect for the internal optical components and cables. It has simple design and reliable installation. Fea​​tures ▪ Low Insertion Loss,Low PDL ▪ High return loss ▪

Qualfiber Technology Co.,Ltd      [2019-01-11 02:01:00 ]

PLC Splitter Mini Module

PLC Splitter Mini Module PLC splitter mini module is one of the most important passive devices in the optical fiber link. It offers accurate and even splits with minimal loss, especially applicable to a passive optical network to connect the terminal equipment and to branch ​

Qualfiber Technology Co.,Ltd      [2019-01-11 01:59:45 ]

200GHz DWDM Module(4,8,16F)

200GHz dense wavelength division multiplexer (DWDM) utilizes thin film coating technology and proprietary design of non-flux metal bonding micro optics packaging to achieve optical add and drop at the ITU wavelengths. Parameter 4-Channel 8-Channel 16-Channel Mux Demux Mux Demux M

Qualfiber Technology Co.,Ltd      [2019-01-11 01:54:48 ]

Double Sheath Spiral steel Simplex Fiber optic cable Indoor cable.

Double Sheath Spiral steel Simplex Fiber optic cable Indoor cable. 1 fiber, Φ900μm or Φ600μm tight buffer , spiral steel armor, two layers of Kevlar yarn with double sheath (LSZH/ PVC/ OFNR Jacket) Cable construction details Spiral Armor Material Steel Diameter Ф1.7mm Inner

Qualfiber Technology Co.,Ltd      [2019-01-11 01:50:38 ]

12 Core Galvanized Stranded Steel Wire Strengthen Fiber Optic Cable GYFTC8A

12 Core Galvanized Stranded Steel Wire Strengthen Fiber Optic Cable GYFTC8A The fibers, 250μm, are positioned in a loose tube made of a high modulus plastic, the tubes are filled with a water-resistant filling compound. Loose tubes filled with water proof compound to ensure comp

Qualfiber Technology Co.,Ltd      [2019-01-11 01:43:57 ]

6-144 Core GYTC8S Figure 8 Self Supporting Fiber Optic Cable

The fibers are placed in a loose tube made of high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire locates in the center of core as a metallic strength member. The tubes (and fillers) are stranded around the strength member into a compa

Qualfiber Technology Co.,Ltd      [2019-01-11 01:41:45 ]

Duct installation Round FTTH fiber optic cable with steel tape armored

Bow-type FTTH put in side with 2 KFRP, the optical fiber unit positioned in the centre. Two parallel strength member are placed at the two sides and have aramid yarn to protect the inside FTTH, ourside s Cable construction details

Qualfiber Technology Co.,Ltd      [2019-01-11 01:39:26 ]

Fiber to the home aerial drop cable (2core FTTH)

FTTH Cable directly connected to their homes, their bandwidth, wavelength and transmission technology type are not restricted. The optical fiber unit id positioned in the center. Two parallel strength member are placed at the two sides. Cable construction details Items Descripti

Qualfiber Technology Co.,Ltd      [2019-01-11 01:35:52 ]

FTTH 4 Core Losse Tube Type Fiber Optic Drop Cable

The cable put in side with 2 FRP, the optical fiber unit positioned in the Loose tube. Two parallel strength member are placed at the two sides and have loose tube to protect the inside FTTH, outside sheath is HDPE. Cable construction details No of fiber 4F SM fiber Fiber type G6

Qualfiber Technology Co.,Ltd      [2019-01-11 01:30:35 ]

ADSS & OPGW Dead End Grip

Short Span dead end grip for ADSS(ADN) Component Single layer glue thread, thimble, extension loop, U-shaped hanging loop, bolt, nut etc. Characteristic Simple structures, easy installation, and to lower the costs of the project. Conditions For The Usage Optical cable projects wi

Hebei Glame Import and Export Trade Co.,Ltd.      [2019-01-10 11:17:38 ]

ADSS & OPGW Preformed Strain Clamp

Dead end grip for OPGW Component Inner armor rods, outer armor rods, thimble, U-shaped hanging loop, Extensioe Rods, bolt, nut, etc. Characteristic 1. Stress is distributed equally, without stress focus. It can protect optical cabl-es very well. 2. Under the condition of not exce

Hebei Glame Import and Export Trade Co.,Ltd.      [2019-01-10 11:10:07 ]

1.25G SFP Bi-Di 3KM SC Optical Transceiver

1.25G SFP Bi-Di 3 KM SC Optical Transceiver Item NO. ESBxx12-3SCD3 D ate rate 1.25G Wavelength 1310/1550nm Distance 3K M Connector SC First SM DDM YES Place of origin Made in China Shipping P ort ShenZhen Package type Individual package or 10pc/package Features Dual data-ra

ETU-Link Technology Co., LTD      [2019-01-07 11:47:07 ]

Telephone jack ss328 from usa to brazil

Telephone Jack from U S.A. to Brazil Features Telephone Jack SS328 Telephone Jack from U S.A. to Brazil. Item # telephone-jack-ss328-from-usa-to-brazil Availability Usually ships the next business day

World Wide Voltage      [2018-11-29 16:24:00 ]

Telephone jack au4 from usa to australia

Telephone Wall Jack from U S.A. to Australia. Features Telephone Jack AU4 Telephone Wall Jack from U S.A. to Australia. Item # telephone-jack-au4-from-usa-to-australia Availability Usually ships the next business day

World Wide Voltage      [2018-11-29 16:21:40 ]

integrate EOC master with GE media converter

Overview BD-2EOC-2GE is the integrate EOC Master with two EOC master module and one Media Converter module. The BD-2EOC-2GE EOC Master can provide high speed data service based on coaxial cable network. BD-2EOC-2GE built in a media convert, 10/100/1000Mbps media converter. The mo

Shanghai Baudcom Communication Device Co.,Ltd      [2018-11-05 17:32:31 ]

4 E1 to Ethernet GFP Converter

Overview The 4 E1 to ethernet converter is the IP ethernet over TDM converter , which supports the conversion from MAC frames to 1 – 4 E1 lines. The maximum bit rate is 7.8Mbps (4E1 lines). The 4E1 converter not only provides alarms and status of the E1 line but also Ethernet i

Shanghai Baudcom Communication Device Co.,Ltd      [2018-11-05 17:30:42 ]

Multi-service SDH STM-1 Add Drop Multiplexer

Overview The STM-1 add & drop multiplexer delivers bonded E1 lines , Ethernet services and V.35 links over legacy SDH networks. Installed at the customer site or directly on STM-1 access ring, ESDH155ADM leverages the SDH infrastructure for LAN connectivity and Internet access, w

Shanghai Baudcom Communication Device Co.,Ltd      [2018-11-05 17:24:20 ]

Optical STM-1 to Electrical STM-1 converter

Overview STM-1 photoelectric converter provides coverting function between electrical interface and optical interface for STM-1 service based on SDH technology. STM-1 photoelectric converter is an interface conversion equipment supplied with one STM-1 electrical interface and one

Shanghai Baudcom Communication Device Co.,Ltd      [2018-11-05 17:22:48 ]

Mini multi-service Aggregation SDH multiplexer

Overview BD-MUX04-LMFE is a carrier-class, cost-effective, compact (only 1U high), STM-1/STM-4 SDH/MSPP platform that is designed for application in metro and access networks to facilitate the efficient transport of traditional TDM and emerging data traffic for service providers.

Shanghai Baudcom Communication Device Co.,Ltd      [2018-11-05 17:21:57 ]

63E1 STM-1 Terminal Multiplexer

BD-SDH63 is a standard SDH terminal multiplexer It multiplexes 63 E1 signals into a STM-1 stream, with TU-12 cross-connect capability. This compact multiplexer is housed in a standard 19” 1U rack mount box Optical Mux STM-1 155M with 6ethernet and 16E1 is developed based on SDH

Shanghai Baudcom Communication Device Co.,Ltd      [2018-11-05 17:21:04 ]