ST-F005 is a face and fingerprint recognition time attendance device, using multiple identification methods face+fingerprint+password ARM9 industrial computing core, fast operation, good stability, large storage flash, data storage security worry free. The equipment panel is made
Shineacs Technology Limited [2019-04-09 10:32:58 ]
ST-F301 is a face recognition time attendance access control machine, using multiple identification methods face + password + ID/IC (optional). The use of ARM9 industrial computing core, fast operation, good stability, large storage flash, data storage security worry free. Standa
Shineacs Technology Limited [2019-04-09 10:17:22 ]
Overview This standalone access control is specially designed for office, office, building, district, factory, building public access and other entrances. Support the sensor card to open the door. Products can be used as access control, can also be used as Wiegand reader, to prov
Shineacs Technology Limited [2019-03-27 12:01:10 ]
Overview This Touch access control machine is a independent access control controller that designed for office, office, building, district, factory, building public access and other entrances, Support the sensor card to open the door. Products can be used as access control, can a
Shineacs Technology Limited [2019-03-27 11:59:24 ]
Overview This standalone access control card reader is specially designed for controlling the entrance of office, building,redidential area,facttory Compared to other same products this one has the following advantages Advantage 1. Less than 0.2 second Response Speed 2. Built-in
Shineacs Technology Limited [2019-03-27 11:57:32 ]
Overview This standalone access control card reader is specially designed for controlling the entrance of office, building, redidential area, facttory. Compared to other same products this one has the following advantages 。 Advantage 1. Less than 0.2 second Response Speed 2. Bu
Shineacs Technology Limited [2019-03-27 11:55:53 ]
JMY6804 is a series of RFID read/write module. It has various functions and supports multi ISO/IEC standard of contactless card. The RF protocol is complex, but the designer combined some frequent used command of RF card and then user could operate the cards with full function by
jinmuyu electronices co.,ltd [2018-12-19 12:27:20 ]
JMY622 connects outside antenna by 50ohm coaxial cable. It fully supports ISO14443 and ISO15693 cards. It has EMV2010 certification ability, also could be set RF output level. The surface mount and very small module size design are fit to portable devices. The RF protocol is comp
jinmuyu electronices co.,ltd [2018-12-19 12:24:23 ]
JMY6122 is a series of RFID read/write module. It has various functions and supports multi ISO/IEC standard of contactless card. The RF protocol is complex, but the designer combined some frequent used command of RF card and then user could operate the cards with full function by
jinmuyu electronices co.,ltd [2018-12-19 12:23:22 ]
JMY6021 is a series of RFID read/write module with IIC, UART, RS232C and USB communication port. It has various functions and supports multi ISO/IEC standard of contactless card. The RF protocol is complex, but the designer combined some frequent used command of RF card and then
jinmuyu electronices co.,ltd [2018-12-19 12:16:39 ]
JMY601 is a series of RFID read/write module with UART or IIC communication port. It has various functions and supports multi ISO/IEC standard of contactless card. The RF protocol is complex, but the designer combined some frequent used command of RF card and then user could oper
jinmuyu electronices co.,ltd [2018-12-19 12:08:32 ]
MR730 series desktop contactless IC card reader/writer is base on NXP series RF chip. The communication port is Ethernet. The reader fully supports the IC card according to ISO14443 and ISO15693 standard, especially completely supports ISO14443-4 contactless CPU card. The reader
jinmuyu electronices co.,ltd [2018-12-19 12:06:06 ]
MR7911 is the standard USB PC/SC interface with 4 SAM slots fully termsing SAM according to ISO7816, and also compatible with many PC/SC readers in the market. It has high speed MCU and advantage firmware providing very high card process speed. Its\' RF interface and protocol pro
jinmuyu electronices co.,ltd [2018-12-19 12:03:59 ]
MR801 series desktop contactless IC card reader is based on NXP series RF chip with high performance ARM7 MCU. The communication is according to USB PC/SC standard. The reader fully supports the IC card according to ISO14443 standard, especially completely supports ISO14443-4 con
jinmuyu electronices co.,ltd [2018-12-19 12:02:49 ]
MR811 series desktop contactless IC card reader/writer is based on NXP series RF chip with high performance ARM7 MCU. The communication is according to USB PC/SC standard. The reader fully supports the IC card according to ISO14443 standard, especially completely supports ISO1444
jinmuyu electronices co.,ltd [2018-12-19 11:56:10 ]
MR880 series desktop contactless IC card reader is based on NXP series RF chip with high performance STM32 MCU. The communication is according to USB PC/SC standard. The reader fully supports the IC card according to ISO14443 and ISO15693 standard, especially completely supports
jinmuyu electronices co.,ltd [2018-12-19 11:53:10 ]
