Measurement & Analysis Instruments Manufacturers and Suppliers

Total 27461 products found
ENV-50-ORP Industrial ORP Probe

ENV-50-ORP Industrial ORP Probe Operating principle ORP stands for oxidation/reduction potential. Oxidation is the loss of electrons and reduction is the gain of electrons. The output of the probe is represented in millivolts and can be positive or negative. Just like a pH probe

ISweek company      [2018-03-16 15:47:58 ]

ENV-40-DO Dissolved Oxygen Probe

ENV-40-DO Dissolved Oxygen Probe Operating principle A galvanic dissolved oxygen probe consists of a polyethylene membrane, an anode bathed in an electrolyte and a cathode. Oxygen molecules defuse through the probes membrane at a constant rate (without the membrane the reaction h

ISweek company      [2018-03-16 15:43:36 ]

Taber abrasion tester

Standards: ASTM D3884 、 ASTM D1175 、 ASTM D1044 、 ASTM D4060 、 TAPPI T476 、 ISO 9352 、 ISO 5470-1 、 JIS K7204 、 JIS A1453、 JIS K6902 、 JIS L1096 、 JIS K6964 、 DIN 52347 、 DIN 53109 、 DIN 53754 、 DIN 53799 TABER 5750 Abrasion Tester with CE certific

Qinsun Instruments (Shanghai) Co., Ltd.      [2018-03-15 14:38:12 ]

Flammability Tester for Construction Materials

The main purpose Flammability Tester for Construction Materials is used to detect a variety of building materials and combustion performance measurement and control performance exterior insulation system, with touch-button design, high-voltage electronic ignition system, servo mo

Qinsun Instruments (Shanghai) Co., Ltd.      [2018-03-15 14:37:19 ]

Abrasion Scrubbing Resistance Tester

Application Scrubbing Resistance Tester can be wiped by the addition of abrasives or detergents for the determination of the washing and scrubbing resistance as well as clean ability of dispersion paints. It is usually applied to Scrub resistance test on interior wall paints, flo

Qinsun Instruments (Shanghai) Co., Ltd.      [2018-03-15 14:16:33 ]

CM1106 Single Beam Infrared Carbon Dioxide Sensor NDIR CO2 Sensor Module

CM1106 Carbon Dioxide Sensor NDIR CO2 Sensor Module Introduction Single Beam(single light source, single wavelength) NDIR CM1106 (Miniature size) can be used to detect CO2 concentration of indoor air by adopting advanced non-dispersive infrared technology(NDIR). It is widely used

ISweek company      [2018-03-06 17:30:00 ]

TS418-1N426 Thermopile Infrared Sensor for NDIR CO2 Gas Detection

TS418-1N426 Thermopile Infrared Sensor CIFICATIONS • Thermopile IR-Sensor • Filter for NDIR CO2 Gas Detection • Single Element • Very High Signal • Flat Filter • Small Package • Accurate Reference Sensor TS418-1N426 Thermopile Infrared Sensor DES CRIPTION Thermopile

ISweek company      [2018-03-06 17:27:54 ]

WQ-FDO Highly Accurate and Stable Optical Dissolved Oxygen Sensor

WQ-FDO Optical Dissolved Oxygen Sensor The WQ-FDO Optical Dissolved Oxygen Transmitter is an instrument designed for measuring dissolved oxygen concentrations in liquids. The WQ-FDO Optical Dissolved Oxygen Transmitters were developed to meet different requirements ranging from s

ISweek company      [2018-03-06 17:22:12 ]

DT-625 Digital Humidity & Temperature Meter

DT-615/625/616CT Humidity & Temperature Meters DT-625 is digital Humidity & Temperature Meter with Wet Bulb Temperature & Dew Point temperature, which has been designed to combine the functions of Humidity Meter, Temperature Meter, Wet Bulb Temperature and Dew point temperature.

ISweek company      [2018-03-06 17:17:11 ]

PSC-T54U Non-Contact Infrared Pyrometer for Glass Industry Applications

PSC-T54U Infrared Pyrometer for Glass Industry Applications PSC-T54U Non-Contact Infrared Pyrometer Description The digital PSC-T54U is designed specifically for glass surface applications. Offering a wide temperature range from 350° to 1200°C, it is essential for thin glass su

ISweek company      [2018-03-06 17:09:59 ]

S80 Liquid Analytical Sensors

Measure pH, ORP, Specific Ion, Dissolved Oxygen, Turbidity, Conductivity or Resistivity with Model T80 Universal Transmitter S80 Liquid Analytical Sensors Overview The intelligent sensor choice to fit your application. The S80 sensors have two Universal Sensor Designs; Insertion/

ISweek company      [2018-02-08 16:42:09 ]

Soil electrical conductivity sensor, soil ec sensor, soil salinity sensor

RK500-03 Soil EC Sensor has the function of soil electrical conductivity and salinity measurement The conductance value converted to the corresponding with analog or digital signal Products through standard KCl solution calibration,insert it into soil, can be directly determine t

Hunan Rika Electronic Technology Co.,Ltd      [2018-02-05 14:21:53 ]

Rika RK500-02 China Soil PH Probe Sensor Manufacturer

RK500-02 Soil PH Sensor for measuring soil pH value should be a good solution with professional display instrument, calibration problems such as complicated, expensive and difficult to carry The product can be for continuous online monitoring of soil and waste water PH.

Hunan Rika Electronic Technology Co.,Ltd      [2018-02-05 14:20:35 ]

Multicomponent FTIR Gas Analyzer Fourier transform infrared, FTIR ISO5659-2

Introduction Gasmet On-line Series includes industrial multicomponent gas analyzers for continuous monitoring applications. The Gasmet CX4000 incorporates a Fourier transform infrared spectrometer, a temperature controlled sample cell, and signal processing electronics. The analy

chongqing gold co ltd      [2018-02-01 16:23:58 ]

Textiles 45 degree Damaged Area Experimental Device ASTM D 1230,NFPA 702

Introduction Textiles 45 ° Damaged Area Experimental Device is designed according to the latest edition of the national standard GB/T14645 design and manufacturing; applies to textile fabric in under 45 ° combustion, determination of the damaged area and damage length determina

chongqing gold co ltd      [2018-02-01 16:06:18 ]

Oxygen Index Tester

Introduction To automatically determine the minimum quantity of oxygen required for combustion. The apparatus determines the flammability characteristics of the materials used in the production of electric cables. The oxygen percentage is detected by a paramagnetic transducer (O2

Qinsun Instruments (Shanghai) Co., Ltd.      [2018-01-31 10:44:54 ]

Wool Fiber Fineness Analysis Tester

Wool fiber fineness value is measured by the airflow method. When exerting a certain pressure air to a certain amount of mass and volume of sample wool fiber, because the fineness of wool fiber is different, the flow of gas through is different, and by measuring the gas flow, the

Qinsun Instruments (Shanghai) Co., Ltd.      [2018-01-31 10:43:10 ]

Needle Flame Testing equipment for evaluating fire hazard

The device use needle flame to simulate small flame effect resulted from equipment incorrect operation so as to evaluate fire hazard. Expose the specimen to fire in a certain time. The temperature of the copper block is measured by K-type mineral insulated metal sheathed thermoco

Qinsun Instruments (Shanghai) Co., Ltd.      [2018-01-31 10:41:46 ]

Circular Locus Pilling Testig machine

The instrument is used to test the pilling conditions of wool fabric, chemical fiber cotton, and blended, knitted, woven fabric to identify product quality and process effect. When testing, the fabric is rubbed against nylon brush and abrasive, or rubbed against abrasive only in

Qinsun Instruments (Shanghai) Co., Ltd.      [2018-01-31 10:38:21 ]

Fluorescent UV Test Chamber

This product uses fluorescent UV lamps, combined with temperature and humidity device to simulate the material decline in color, brightness, strength and cracking, spalling, powder, oxidation damage via the high temperature sun light (UV), high humidity, condensation, dark cycle

Qinsun Instruments (Shanghai) Co., Ltd.      [2018-01-31 10:35:21 ]