Measurement & Analysis Instruments Manufacturers and Suppliers
1．Simple operation The test can be started after turning on the test. The test does not require any keys. The instrument can measure the gloss value on the surface of the material. 2．High precision The LS191 gloss meter has high accuracy, which can ensure that it can pass the
linshangtech [2020-11-26 09:34:15 ]
1. Ultra-small design that fits in your pocket for easy portability. 2. Wide measurement range which can reach 1000GU. 3. The gloss checker has high accuracy which can ensure that it passes the testing of any authoritative metrology institute and meets the standards of national l
linshangtech [2020-11-26 09:32:04 ]
1. The LS126C UV intensity tester is based on the detection requirements of 1 meter distance specified in the \" WST 367-2012 Regulation of disinfection technique in healthcare settings \" and a 1 meter test hook is provided. 2. The UVC light meter comes with a Bluetooth data tra
linshangtech [2020-11-26 09:25:20 ]
1. The LS129 UV digital probe has a very small size, and the detector and controller adopt a split design, which is very convenient for installation where measurement is needed. It is also possible to combine the detector and controller with screws for measurement. 2. It adopts s
linshangtech [2020-11-23 10:10:09 ]
1. With wide spectral response range, the UV power puck can test UV LED light source with any peak in the range of 365nm-405nm. 2. Real intelligent UV energy meter, the maximum value, real-time value, temperature curve and power curve can be switched. 3. Ultra-wide measurement ra
linshangtech [2020-11-23 10:08:05 ]
1. The thickness of LS133 UV integrator is 7.6mm and the width is 44mm, the measurement won’t be limited by the measurement space. 2. The spectral response range is wide, suitable for measuring various wavelengths of UV LED light sources such as 365nm, 385nm, 395nm, 405nm, etc.
linshangtech [2020-11-23 10:01:45 ]
1. Fast measurement, one measurement can be completed in 0.5s. 2. The use of low temperature resistant OLED screen can ensure the normal use of the car paint meter in a low temperature environment of -40°C. 3. No need to calibrate after power on, just use the standard board prov
linshangtech [2020-11-23 09:41:35 ]
LS128 UV puck is used to test the ultraviolet energy and uv light radiation intensity of the uv LED light source of 365nm-405nm. It is widely used in uv curing machine , uv dryer, exposure machine. Application Light intensity, energy and temperature measurement of UV LED light so
linshangtech [2020-11-18 10:28:25 ]
1. UV transmittance meter, infrared transmittance meter, visible light transmittance meter (light transmittance meter). Three functions in one device. 2. The UV transmission meter has simple operation and fast measurement. We just need to put the measured sample into the test slo
linshangtech [2020-11-18 10:14:19 ]
1. The spectrum transmission meter has a wide range of applications, suitable for the transmission and rejection rate test of glasses, glass, anti-blue light materials, mobile phone lenses, etc. 2. The light transmission meter can simultaneously measure the transmission value and
linshangtech [2020-11-18 10:10:48 ]
Spectrum transmission meter can be used to test the light transmission performance of the test materials Linshang LS108D light transmission meter also referred to spectrum transmission meter can be used to test the 550nm visible light transmittance, 850nm/940nm IR transmittance.
linshangtech [2020-11-18 09:52:42 ]
Impact Testing Machine and Drop Impact Test 227 g Ball Test 2260 g ball test Test Method for Ball Drop Impact Glazing Materials Ball Test Device Determination of whether the safety glazing material has a certain minimum strength and cohesion under impact from a small hard object
Qinhuangdao Yuanchen Technology Equipment Co., Ltd. [2020-11-17 11:45:39 ]
1. The LS221 coating thickness gauge adopt two measurement principles and can identify the substrate automatically. Measurement can be completed in 0.5 seconds. 2. Advanced digital probe technology can keep the zero position stable without drift and frequent zero adjustment. 3. S
linshangtech [2020-11-17 10:55:28 ]
Dropping Ball Impact Testing Machine With 227g / 508 g /1040 g/ 2260 g Steel Ball Suitable for impact test of safety glass and tempered glass. Related Standard ISO 3537 Road vehicles — Safety glazing materials — Mechanical tests– Clause 6 227 g ball test, Clause 7 2260 g ba
Qinhuangdao Yuanchen Technology Equipment Co., Ltd. [2020-11-13 14:13:40 ]
LS201 Digital Glass Thickness Meter Introduction Linshang LS201 digital glass thickness meter uses the optical reflection principle to measure the glass thickness on one side of the glass. It is especially suitable for the measurement where general measurement tools such as scale
linshangtech [2020-11-09 10:19:39 ]
LS200 Glass Thickness Meter Introduction Linshang LS200 glass thickness meter can be used for thickness measurement of single-layer glass, insulating glass and cylindrical glass bottles. It is especially suitable for measurement occasions where ordinary scales or calipers cannot
linshangtech [2020-11-09 10:12:39 ]
LS108A Lens Transmission Meter Introduction LS108A lens transmission meter is mainly used to measure IR ink hole of mobile phone lens. (It is also suitable for infrared ray transmittance testing of various products that use infrared technology, such as remote control windows, IR
linshangtech [2020-11-09 10:06:47 ]
LS108 Spectrum Transmission Meter Introduction LS108 spectrum transmission meter is a professional optical transmittance tester for measuring the spectacle lenses, coating materials, organic materials, anti-blue light materials and other materials. The meter combines the three me
linshangtech [2020-11-09 10:02:16 ]
LS108H Spectrum Transmission Meter Introduction LS108H spectrum transmission meter is a desktop instrument, which is professionally used for optical transmittance test of various materials such as lens, glass, coating material, organic material and paint, etc. The test aperture o
linshangtech [2020-11-09 09:58:30 ]
LS108D Lens Transmission Meter Introduction LS108D lens transmission meter is professionally used for mobile phone lens transmittance test and IR hole infrared transmittance test. The test aperture is 0.5mm, which can test 550nm visible light transmittance and 850nm, 940nm infrar
linshangtech [2020-11-06 10:42:23 ]
