Shaft material 40Cr(ASTM A5140) or 45#(ASTM 1045) steel. Helix plate ASTM A36 hot rolled plate, available in 3/8\'\' and 1/2\'\' thickness. All helix leading edges sharpened and rock cut and 45 degrees. Corrosion protection ASTM A153, hot dipped zinc coating. Efficient torque tra
Better Screw Co., [2023-05-06 16:17:05 ]
轴尺寸（英寸） 壁厚（英寸） 螺旋粗(inch) 引线长度（英尺） 螺旋尺寸（英寸） 延伸长度（英尺） 2.875 外径。 0.262 3/8 或 1/2 3英尺/5英尺/7英尺/10英尺 8/10/12/14 3英尺/5英尺/7英尺/10英尺
Better Srews Co. [2023-02-28 13:50:28 ]
Available in 2\", 2.5\", 3\" or 4\" square tube helices thickness are available in 3/8” and 1/2” Helices material conforms to ASTM A36 hot rolled plate All helix leading edges sharpened and rock cut and 45 degrees. Corrosion protection to conform to ASTM A153 standard for hot
wendy [2023-02-21 16:37:20 ]
Available in 2\", 2.5\", 3\" or 4\" square tube helices thickness are available in 3/8” and 1/2” Helices material conforms to ASTM A36 hot rolled plate All helix leading edges sharpened and rock cut and 45 degrees. Corrosion protection to conform to ASTM A153 standard for hot
wendy [2023-02-21 16:25:23 ]
Bar Material 40Cr or 45# steel , round corner 5mm radius Helix Plate material conforms to ASTM A36 hot rolled plate helices thickness are available in 3/8” and 1/2” inch All helix leading edges sharpened and rock cut and 45 degrees. Corrosion protection to conform to ASTM A15
Better Screw [2019-01-12 10:22:02 ]
B ar Material 40Cr or 45# steel , round corner 5mm radius. Helix Plate material conforms to ASTM A36 hot rolled plate. H elices thickness are available in 3/8” and 1/2” inch. A ll helix leading edges sharpened and rock cut and 45 degrees. C orrosion protection to conform to A
Better Screw [2018-11-20 14:54:14 ]
Hot Dip Galvanized ground round Shaft Helical Piers for fences Usage Helical piers, also known as anchors, piles or screw piles, are deep foundation solutions used to secure new or repair existing foundations. Due to their design and ease to install, they are most commonly used w
Jinan Better Mechanical Equipment Company , Ltd. [2018-08-22 14:40:19 ]
