SiSiB® PC6122 1 2 Bis triethoxysilyl ethane SiSiB® PC6112 (BTMSE) and SiSiB® PC6122 (BTSE) are clear to straw bis-silanes. SiSiB® PC6112 and SiSiB® PC6122 both contain two silyl groups, this unique structure enable it to have better adhesion and weather resistance. Technical
Nanjing SiSiB Silicones Co., Ltd [2023-11-02 09:58:35 ]
The material is obtained by grinding the coarse powder (D50 is 13 micron ~ 75 microns) . It can be used as moulding material, spraying material and composite modified pre-dispersion. FAQs of Grade PF PEEK Powder Properties of Grade PF PEEK Pure Resin Fine Powder Polyetheretherket
Jilin Joinature Polymer Co.,Ltd. [2023-10-20 13:42:15 ]
With good toughness and impact resistance, Grade G peek pellets can be disinfected using steam, ethvi alcohol and rays, etc. You can see the wide uses of PEEK resin in the medical, pharmaceutical, and food processing industries. FAQs of Grade G PEEK Resin Pellets G Series-770G PE
Jilin Joinature Polymer Co.,Ltd. [2023-10-20 13:41:47 ]
ABS resin is a terpolymer composed of acrylonitrile, butadiene and styrene. ABS has the rigidity, chemical resistance and heat resistance of polyacrylonitrile, the appearance and dimensional stability of polystyrene, and the cold resistance and impact resistance of polybutadiene.
Suzhou Anmei Material Technology Co., Ltd [2023-08-24 11:13:20 ]
Silane cross-linked low-smoke halogen-free flame-retardant polyolefin cable material is convenient to use, not only can be quickly cross-linked under warm water cooking conditions but also can be naturally placed at room temperature for cross-linking without additional irradiatio
GuangDong Advanced Thermoplastic Polymer Technology Co.,Ltd [2023-07-13 15:46:52 ]
SiSiB® PC5430 Tetrapropoxysilane SiSiB® PC5430, [also called n-Propyl Silicate] is used as a cross-linking agent for silicon rubber, and as a modifying agent for organic and inorganic resins. The ethyl group of ethyl silicate is replaced by the N-propyl group, so the speed of h
Nanjing SiSiB Silicones Co., Ltd [2023-07-04 13:38:41 ]
SiSiB® PC5424 E thyl S ilicate 40 SiSiB® PC5424 is a hydrolyzed and oligomerized form of ethyl silicate. It is a mixture of monomers, dimers, trimers and cyclic polysiloxanes. SiSiB® PC5424 is a transparent liquid containing 40% silica (SiO2) by mass, but in practice, in addit
Nanjing SiSiB Silicones Co., Ltd [2023-07-04 13:37:49 ]
Irradiation cross-linking LSZH Silane cross-linked low-smoke halogen-free flame-retardant polyolefin cable material is convenient to use, not only can be quickly cross-linked under warm water cooking conditions but also can be naturally placed at room temperature for cross-linkin
GuangDong Advanced Thermoplastic Polymer Technology Co.,Ltd [2023-05-09 13:44:47 ]
The material is obtained by grinding the coarse powder (D50 is 13 micron ~ 75 microns) . It can be used as moulding material, spraying material and composite modified pre-dispersion. Types of Grade PF PEEK Pure Resin Fine Powder ZYPEEK Supplier PF Series-770PF PEEK Pure Resin Fin
Jilin Joinature Polymer Co.,Ltd. [2023-05-05 16:48:46 ]
With good toughness and impact resistance, Grade G peek pellets can be disinfected using steam, ethvi alcohol and rays, etc. You can see the wide uses of PEEK resin in the medical, pharmaceutical, and food processing industries. Grade G Polyetheretherketone Resin Pellets from ZYP
Jilin Joinature Polymer Co.,Ltd. [2023-05-05 16:48:26 ]
Polyetheretherketone PEEK has outstanding heat aging properties, good flame retardancy, self-extinguishing, hydrolysis resistance, corrosion resistance, stripping resistance, fatigue resistance, radiation resistance, and good electrical insulation, still keeps lower dielectric co
Jilin Joinature Polymer Co.,Ltd. [2023-05-05 16:47:22 ]
Epoxy resin mortar is based on epoxy resin as the main component, with a series of additives, forms a high-strength, high-cohesive consolidated body after mixing and curing. It is with stable chemical properties, good corrosion and weather resistance. The consolidated body has hi
Tianjin Jinhai Special Coatings & Decoration Co., Ltd [2023-03-24 14:04:45 ]
The Influence Factors of the Resin Bond Diamond Tools The influence of binder mainly includes the influence of binder type and content, and so on. (1) The common characteristic of all kinds of resin bond diamond powder tools is poor heat resistance. In the process of processing w
Henan E-Grind Abrasives Co., Ltd. [2023-02-22 14:07:10 ]
Polytetrafluoroethylene, also known as waterproof breathable membrane, is generally called \"non-stick coating\". It is a synthetic polymer material that uses fluorine to replace all hydrogen atoms in polyethylene. This material has the characteristics of acid and alkali resistan
SUNGOD Technology Co., Ltd. [2023-02-17 09:26:30 ]
ABS resin is a terpolymer composed of acrylonitrile, butadiene and styrene. ABS has the rigidity, chemical resistance and heat resistance of polyacrylonitrile, the appearance and dimensional stability of polystyrene, and the cold resistance and impact resistance of modified polye
Suzhou Anmei Material Technology Co., Ltd [2022-12-08 14:07:25 ]
Compared with general-purpose ABS, ABS plastic chemical resistance is requiring excellent impact performance, rigidity and flow properties. It is obvious that it should have very excellent chemical resistance to maintain normal use in harsh chemical environments. Typical Applicat
Suzhou Anmei Material Technology Co., Ltd [2022-09-30 17:48:35 ]
PA 66 GF 15 is a 15% glass fiber reinforced, heat-resistance, polyamide 66 resin for injection molding. PA66 GF15 Storage and Handling PRE-PROCESSING： Pre-drying 4-6h / 130°C Processing Melting temperature 280 - 300 °C Mold temperature 60 - 100 °C Product storage and handlin
Suzhou Anmei Material Technology Co., Ltd [2022-09-23 09:42:26 ]
Resin bond microndiamondis made from Diamond Resin Bond Mesh. It has a multi-crystalline structure, rough surface, and uniform shape. The sharp edges always generate during cutting, grinding, lapping, and finishing. With such unique characteristics, Diamond Resin bond micron prov
Henan E-Grind Abrasives Co., Ltd. [2022-08-19 15:13:29 ]
Each Particle is with sub-crystal structure. Irregular and Very rough surface. New cutting edges come out during working. Also available in electroless plating of both nickel (30% and 56% by wt.) and copper (50% by wt.) allowing for better crystal retention in both phenolic and p
Henan E-Grind Abrasives Co., Ltd. [2022-08-19 15:12:50 ]
Name Methyltrichlorosilane (M1) Feature This product is a colorless transparent liquid. It is the main material of silicone products to produce methyltriethoxysilane and silane crosslinking agent (methyl triethoxysilane and methyltrimethoxysilane), and produce silicon resin, spec
Zhongtian East Fluorine Silicon Material Co., Ltd [2022-04-27 15:18:33 ]
