Tungsten Carbide Seal Rings
Product Quick Detail
- Minimum Order
- 1
- Packaging
- N/A
- Delivery
- 15 Days
Specifications
- Country: China (Mainland)
- Business Type:
- Market:
- Founded Year:1990
- Address:Golden Valley Industrial Park Tianyuan District Zhuzhou, Hunan China 412000
- Contact:Weison Advanced Materials CO.,LTD
Other products from Weison Advanced Materials CO.,LTD
Relate products of Tungsten Carbide Seal Rings
Y-shaped sealing rings are widely used in reciprocating sealing devices, and their service life is longer than that of O-shaped sealing rings. The applicable working pressure of the Y-shaped sealing ring is not greater than 40MPa, and the working temperature is -30~80℃; ...
What is a Y-type sealing ring and what is its function? Today Shijiazhuang slurry pump manufacturer will introduce it to you. The Y-shaped sealing ring has a Y-shaped cross-section and is a typical lip sealing ring. Because its service life and sealing performance are higher ...
The O-type sealing ring is a rubber sealing ring with a circular cross-section. Because its cross-section is O-shaped, it is called an O-type rubber sealing ring, also called an O-ring. It began to appear in the mid-19th century, when it was used as a sealing element for steam ...
The O-ring is an extrusion seal. The basic working principle of the extrusion seal is to rely on the elastic deformation of the seal to cause contact pressure on the sealing contact surface. If the contact pressure is greater than the internal pressure of the sealed medium, ...
The O-rings of horizontal slurry pumps can be divided into static seals, reciprocating seals, rotating seals and switch seals according to the relative movement state between the seal and the sealed device. According to the compression amount (tightness) of the O-ring ...
Although the O-ring for sealing the slurry pump is a very small accessory in the entire assembly of the slurry pump, its role is irreplaceable. Today we will talk about its characteristics. As for the O-ring used for reciprocating motion, its motion friction resistance is ...
As one of tungsten carbide scrap suppliers, we offer tungsten carbide scrap for sale at good wholesale prices. Tungsten carbide scrap materials can be roughly divided into the following three categories: (1) Waste products from tungsten processing: wire, coil, powder, sintered ...
Seal Spare Parts Sealing Rings Brief Introduction of Sealing Rings The seal ring is a ring seal with the notch, it is placed in the ring groove of the sleeve, the sleeve rotates together with the shaft, and the sealing ring is elastically attached to the inner hole wall of the ...
Overview of 120 ° U shaped Drill Bit GREAT has customized manufacture several types of tricone roller cone drill bits. The traditional roller bit was cut by tritone bit. So it is including No.1, No.2, No.3 Cone cutters. There are Cone 1 & cone 2 & cone3, wedge cutters design ...
Overview of 120 ° U Shaped Drill Bit Great Drill Bits has customized manufacture several types of roller bit. The traditional single roller bit was cut by tricone roller drill bit. So it is including No.1, No.2, No.3 Cone cutters. There are Cone 1 & cone 2 & cone3, wedge ...
