Sell cnc router kits 3axis nema 42 stepper motor 3256 oz-in,6a cnc mill & cutting @China (Mainland)

CNC Router kits 3Axis Nema 42 Stepper Motor 3256 OZ-IN,6A CNC Mill & Cutting

Product No.: N2012611165712


 

This item includes:

    3 PCS Nema 42 Stepper Motor With 3256 OZ-In Holding Torque,

         3 PCS Stepper Motor DriverDQ2722M, 110V-220VAC, 7.0A, 200 Microstep,

         1 PC Breakout Board & 1 Parallel Cable for free offering

       The Breakout Board is offered to you for free to buy this item above, so that you

 can set this kit up, and work in better condition.

    Note: Alternating current on driver to connect the power,there is no need for any

power supply to convert.

 

 

1, stepper motor

Technical Specifications
Part No.:                           110BYGH150-001 
Frame Size:                     NEMA42
Step Angle:                     1.8 degree
Voltage:                           5.44VDC
Current:                           6.8 A/phase
Resistance:                     0.8Ohm/phase
Inductance:                    15mH/phase
Holding torque:              230 Kg-cm        3256oz-in
Rotor inertia:                  1090 g-cm2
Number of wire leads:  4
Weight:                           8.4kg
Length:                           150mm
 
 
2, Stepper Motor Driver DQ2722M

The DQ2722M is full digital 2 phase stepper driver based on DSP control. The drive voltage of
which is from 110V to 220VAC. It is designed for use with the 2 phase hybrid stepper motor of
 all kinds with 86mm to 130mm outside diameter, regulated phase current 1.2A to 7.0A.
The circuit that it adopts is similar to the circuit of servo control which enables the motor
 run smoothly without noise and vibration. The highest micro step is 60000ppr. It is widely
used in middle and big size numerical control devices such as curving machine, CNC machine,
computer embroider machine, packing machine and etc.

FEATURES
 
High performance, low price
16 channels constant angle, constant torque micro steps, highest micro step: 40000ppr
Highest response frequency: 200Kpps
Current of winding will be reduced by approximately 50% when no step pulse command
is received for 0.1 second
Opto-isolated signal I/O
Drive current is adjustable in 16 channels from 1.2A/phase to 7.0A/phase
Single power supply from 110V to 220VAC
Phase terminal memory function (motor phase terminal is memorized after input pulse train
stopping 5s and it is recovered when stepper driver power on or signal MF changes from
 low level to high level)
 

Post by wantai motor    Electrical Equipment & Supplies    @2013-01-16 07:23:37

Contact with wantai motor

  • Country:China (Mainland)
  • Contact Person:wantai motor
  • Company:Changzhou Wantai Electrical Appliance Co., Ltd

Social Connect

  • mfrbee.com social network on google plus
  • mfrbee.com social network on sina weibo
  • mfrbee.com social network on twitter

Contact Us

  • contact us via email
  • ShaoYaoJu , ChaoYang district , Beijing , China