Sell co2 fractional laser beauty equipment @China (Mainland)
We’re a professional beauty equipment manufacturer from China, mainly offering IPL hair removal, IPL+RF beauty equipment, Q-switched ND YAG laser, RF skin lifting and Co2 fractional laser beauty equipment.
How it works
CO2 Fractional Laser System fires a laser beam which is split into numbers of microscopic beams, producing tiny DOT or fractional treatment zones within the selected target area only. Therefore,
the heat of laser only passes deeply through the fractional damaged area. This allows the skin to heal much faster than if the whole area was treated. During the skin self-resurfacing, a great
amount of collagen is produced for skin rejuvenation, eventually the skin will look much healthier and younger.
Application:
Skin renewing and resurfacing
Wrinkle removal, skin tightening
Acne and acne scar removal
Smooth burnt scars and surgery scars, etc
Remove intractable chloasmas and pigmentation
Sun damage recovery.
Advantages:
1. Sealed off, DC excited CO2 laser
2. Work mode: CW (continuous wave)
Pulse: Super pulse
3. Film switch, computer-control, large screen liquid crystal display module
4. Security protection and automatic alarming system
5. Diode laser target instructions
6. Articulated arm have three freedom degrees and seven joints
| wavelength | 10.6μ m, far-infrared laser |
| Pulsed radiofrequency | 0.530 W |
| Hyper-pulse |
1. Max power: 120W 2. Pulse width: 200 to 500μ s is optional |
| Pulse |
1. Average power: 0.5-20W 2. Pulse frequency: 33.3 Hz |
| Scan Graphics | Square, rectangle, round or customized graphics |
| Dot quantity | 400 dots at most |
| Working state | Hyper-pulsed mode |
| Scan mode | Sequence scan or Random scan |
| Pulse energy | 5mj to 80mj is optional for each dot. |
| Laser apparatus | Sealedoff laser device stimulated by direct current |
| Condenser focus | f=100mm |
| Beam divergence angle | 0.3 mrad |
| Spot size | Min 0.1mm at the focus |
| Max power intensity | 75, 000 W / cm² |
| Radiation time | 0.01 1 sec |
| Interval time | 0.01 1 sec |
| Aiming beam | Less than 2mW, 635nm red semiconductor laser |
| Beam transport device | Articulated arm with six segments and balance weight |
| Power supply | 220± 22V AC 50± 1Hz 10A |
Post by Martin Zhang Health & Medical @2011-12-06 14:41:29
Contact with Martin Zhang
Social Connect
Contact Us
- ShaoYaoJu , ChaoYang district , Beijing , China