Air Oil Separators
An air/oil separator is used to seperate compressed air from compressor oil. The compressor oil collects at the bottom
of the separator tank and the compressed air continues to the air receiver. A standard rotary screw separator reduces the lubricant entrained in the compressed air to 2-3 ppm. Under normal
operating conditions an oil separator's service life is 3,000 to 6,000 operating hours.
Specifications
Media | : | Borosilicate Micro-fiber |
Maximum Pressure | : | 20 Bar |
Working Temperature | : | From -20*C up to +120*C |
Flow Rate | : | At working pressure of 7Bar |
Spin-on Filters from 0.6 to 5.5m3/min Other Filters from 0.4 to 39m3/min |
Wrap Type Air/Oil Separators | ||||||||||||
|
||||||||||||
|
||||||||||||
The wrap style oil separator was the original design to remove oil aerosols from compressed air streams. These are glass fiber elements with a consistent pore size.
|
ENVIRO TECH INDUSTRIAL PRODUCTS
Company works under the leadership of Mr.RPSHARMA Phone 9871034100,22483365,22083434 Email. envirotech1976@yahoo.co.in,envirotech76@yahoo.co.in,
http://envirotech.promarket.in/
http://supplyindia.in/enviro-tech-ind/products
Post by RP SHARMA General Industrial Equipment @2012-12-17 12:13:02