Sell liquid pad printing silicone rubber @China (Mainland)

RTV-2 pad printing Silicone rubber description is a two-part condensation liquid rubber. Ratio of Part A silicone to Part B curing agent is 100:2 or 100:3. Pad printing silicone rubber is used for making the printing pads for plastic toys, electroplating products, electronic toys, craftworks, stationery, computer keyboard and so on.

 

 

     1.      The application of RTV-2 pad printing silicone rubber:

 

Pad printing silicone rubber is used for making the printing pads for plastic toys, electroplating products, electronic toys, craftworks, stationery, computer keyboard and so on.

The printing pad then serves as a carrier to transfer patterns from the steel plate to the products surface.

 

 

 

2. Features of RTV-2 Pad printing silicone rubber HY912  HY916

 

a. Two components: silicone rubber and the curing agent

b. American Dupont Teflon top-quality raw material

c. Any color

d. Abrasion resistance

e. good printing effect

f. good resilience

g. high temperature resistance

h. top quality without impurities

i. silicone oil can be added to adjust the hardness if necessary

 

 

3. Technical data of RTV-2 pad printing silicone rubber

 

Appearance: Yellow, red, green, white
Viscosity(cs): 20000~25000
Hardness(A): 28-30
Tensile strength (kgf/cm) ≥35
Tear-strength (kgf/cm) ≥24
Elongation break: (%)≥400
Retractility (%): ≤0.3
Curing agent mixed rate(%): 2-3
Operate time(min): 30
Curing time(hours): 2-4

 

We have free CD on operation instruction for you and provide silicone oil under your request. On-line follow-up technical service are available.

 

Place of Origin:    Guangdong China

Brand Name:       Hong Ye Silicone Rubber

Model Number:    HY912  HY916 silicone rubber

Certifications:  RoHS. MSDS. SGS. ISO.9001:2000

HS code: 39100000

Payment & Shipping Terms: Ocean freight/ Air lift

Minimum Order Quantity:   200 Kilogram 

Supply Capacity: 3.5 ton/week

Price: FOB shenzhen USD 7.8-15.6/kg

Packaging Details: vacuumed thick PE bag inside and iron barrel outside

25kg/drum and 200kg/drum

Delivery Time:      within 3 days after payment confirmed in our bank.

Payment Terms: L/C at sight, T/T, Western Union

 

Any questions of RTV-2 liquid mold making silicone rubber, please feel free to contact with MR. Evan:

 

MSN:helloevanwong(at)hotmail(dot)com

Skype:helloevanwong

Email:helloevanwong(at)hotmail(dot)com

Tel: 0086-755-89948006

Mob: 086-15173590720

 

 

Model	Color	Viscosity (cP)	Hardness (Shore A)	Tensile strength (Mpa)	Tear-strength(Kn/m)	Elongation (%)	Mixing ratio(%)	Pot life (min)	Curing time (h)
912	white	28000±3000	29±2	≥3.5	≥18	≥380	2 - 3	30	2  -  4
916	white	28000±3000	14±2	≥3.2	≥20	≥420	2 - 3	30	2  -  4

 

Notes: Mixing ratio, pot life and Demould time in the above table is measured under the room temperature of 25^。C, relative humidity of 65% to 70%. The data is only for referfence, mixing ratio should be 2% to 3% modified according to various temperatures.

Post by Evan Wong    Rubber & Plastics    @2012-12-05 04:00:54