Sell metal lined slurry pump @China (Mainland)

• Size range (discharge)   1” to 18”   25 mm to 450 mm
• Capacities   to 22,000 gpm   to 5,000 m3/hr
• Heads   to 240 ft    to 73 m

• Pressures   to 300 psi   to 2,020 kPa
Structure Introduction:
1. ZL® slurry pump casing carries replaceable wear-resistant metal or rubber liners. The impellers are made of wear-resistant metal or rubber. The liner of pump body and impeller for ZJLH pump are made of hard metal only.
2. Bearing assembly is adoptable of cylindrical structure, it is easy to adjust the space between impeller and front liner .Can be removed completely when repaired. Bearing assembly use grease lubrication.
3. The shaft seal could use the packing seal, expeller seal and mechanical seal.
4. The pump discharges direction can be positioned at intervals of 45 degrees as request and oriented to any eight positions to suit installations and applications.
5. Drive types: V belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices.

Post by Betty Zhang    Minerals & Metallurgy    @2011-06-07 16:42:26