Sell astm a 335 p5 semless steel pipe/alloy steel pipe (stock) @China (Mainland)

We offer highly reliable and precision manufactured range of alloy steel pipes, that are procured from the reliable sources of the industry. These pipes find multiple usage in different industries such automobile, petroleum, power and others. Designed in different sizes, these pipes are appreciated for their sturdy construction and long lasting finish. 

ASTM A 335 P5 SEMLESS STEEL PIPE/ALLOY STEEL PIPE (STOCK)
Specification: OD30-457mm WT 3-40mm 
Quantity: Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service

Alloy Steel Seamless Pipes (ASME SA335 Grade P5) offered by us are made available in ASME SA335 as well as P1, P5, P9, P11, P12, P91 grades. Our expertise lies in offering these in different sizes & schedules, with IBR & latest edition NACE MR 0175 reports.

This specification covers seamless ferritic alloy-steel pipe for high-temperature service. The pipe shall be suitable for bending, flanging (vanstoning), and similar forming operations, and for fusion welding. Grade P2 and P12 steel pipes shall be made by coarse-grain melting practice. The steel material shall conform to chemical composition, tensile property, and hardness requirements. Each length of pipe shall be subjected to the hydrostatic test. Also, each pipe shall be examined by a non-destructive examination method in accordance to the required practices. The range of pipe sizes that may be examined by each method shall be subjected to the limitations in the scope of the respective practices. The different mechanical test requirements for pipes, namely, transverse or longitudinal tension test, flattening test, and hardness or bend test are presented.

This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.

1. Scope



1.1 This specification covers nominal wall and minimum wall seamless ferritic alloy-steel pipe intended for high-temperature service. Pipe ordered to this specification shall be suitable for bending, flanging (vanstoning), and similar forming operations, and for fusion welding. Selection will depend upon design, service conditions, mechanical properties, and high-temperature characteristics.

1.2 Several grades of ferritic steels (see Note 1) are covered. Their compositions are given in Table 1.

Note 1—Ferritic steels in this specification are defined as low- and intermediate-alloy steels containing up to and including 10 % chromium.

1.3 Supplementary requirements (S1 to S7) of an optional nature are provided. These supplementary requirements call for additional tests to be made, and when desired, shall be so stated in the order together with the number of such tests required.

1.4 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. The inch-pound units shall apply unless the "M" designation of this specification is specified in the order.

Note 2—The dimensionless designator NPS (nominal pipe size) has been substituted in this standard for such traditional terms as "nominal diameter," "size," and "nominal size."

Chemical Component

Standard	Steel Code	Chemical Component(%)
		C	Si	Mn	P	S	Cr	Mo
ASME SA335	SA335 P5	≤0.15	≤0.5	0.30∼0.60	≤0.030	≤0.030	4.0∼6.0	0.45-0.65

Standard	Steel Code	Tensile Strength(MPa)	Yield Strength(MPa)	Elongation Percent(%	Impact Power(J)	Rigidity
ASME SA335	SA335 P5	≥415	≥205	≥22	≥35	≤187HB

Type of Steel Pipes	OD(D)		WT(S)
Cold Drawn Steel Pipe	OD(mm)	Tolerance (mm)		Wall Thickness(mm)	Tolerance (mm)
	>30∼50	±0.3		>3∼20	±10%
	>114∼159	±0.8%		≤30	±10%
	>159∼219	±1.0%
Hot Rolled Steel Pipe	>219∼457	±1.0%		≤20	10%, 12.5%
				>20∼40	10%, 10%

---

Tag:

ASTM A335 P5

ASTM A335 P5 seamless pipe

ASTM A335 Gr. P5 casing pipe

ASTM A335 P5 steel pipe

ASTM A335 P5 alloy pipe

Seamless pipe astm A335 p5

Alloy pipe ASTM A335

ASTM A335 alloy seamless pipe

+ view more

+ASTM A335 P22

+ASME A213 T12

+ ASTM A335 P11

+ASTM A335 P91

 Sunny Steel Enterprise Ltd.
This inventory is part of the inventory, demand and other models in stock or order materials, please contact us.
Phone: 0086-21-33780199 / Fax: 0086-21-51079722
Please send the full data by e-mail: sumxu@163.com or sales@sunnysteel.com
Http://www.sunnysteel.com

Post by Sum Xu    Minerals & Metallurgy    @2012-05-25 17:34:07