BOST-MP01 is a tiny ball of insulating material with moderate hardness, which is sprayed on the surface of the coated glass to prevent scratches between the coated glass. The material does not cause any corrosion to the film of the coated glass and the gap between the glass after
BOST(SHENZHEN) NEW MATERIAL CO.,LTD [2023-05-08 17:18:31 ]
BOST-FSPO1 is a kind of mixed powder with moderate hardness of interleaving materia l microsphere s and various kinds of glass anti-stain preservative materials. lt is sprayed on the surface of glass to delay or reduce glass moldy and prevent scratches on glass, products could be
BOST(SHENZHEN) NEW MATERIAL CO.,LTD [2023-05-08 17:11:09 ]
Type QZ-2/155 Characteristic The product can work continuously under 130C and 150C lt has excellent and electrical properties and is suitable for winding in general motors of class B and F and coils of electrical instrument. Standard in accordance with IEC 60317-3 PRODUCT Ename
SUZHOU WUJIANG XINYU ELECTRICAL MATERIAL [2020-02-21 14:36:46 ]
A PVC pipe stabilizer is a crucial component in the installation of PVC piping systems. It is designed to provide structural support, preventing pipes from sagging or buckling under pressure. These stabilizers are typically made from robust materials that resist corrosion, ensuri
Zhejiang Hongtian New Material Technology Co., Ltd. [2024-06-19 11:34:44 ]
PA66GF15 is a 15% glass fiber reinforced, heat-resistance, polyamide 66 resin for injection molding. PA66 GF15 Storage and Handling PRE-PROCESSING: Pre-drying 4-6h / 130°C Processing Melting temperature 280 - 300 °C Mold temperature 60 - 100 °C Product storage and handling P
Suzhou Anmei Material Technology Co., Ltd [2023-04-11 17:13:45 ]
Anmei focuses on the production of modified engineering plastics. We have polyamide PA66 modified products with properties of heat-resistant, reinforced, toughened, flame-retardant, wear-resistant, weather-resistant, oil-resistant and conductive. According to the characteristics
Suzhou Anmei Material Technology Co., Ltd [2023-04-11 17:13:14 ]
Other than fiber-reinforced pa6 polyamide, the unreinforced nylon type 6 produced by Anmei, one of the professional nylon 6 suppliers/manufacturers, is also divided into toughened, heat-resistant, alloy and flame-retardant modified PA6. Nylon 6 (PA6) is made up of a group of 6 ca
Suzhou Anmei Material Technology Co., Ltd [2023-04-11 17:12:44 ]
Using Polyamide 66 as the basic resin, the pa66 tensile strength is obtained by blending and modifying with the addition of a toughening agent. The flexural strength, abrasion resistance and creep resistance of Nylon 66 are very outstanding. What is the pa6 tensile strength of ny
Suzhou Anmei Material Technology Co., Ltd [2023-04-11 17:12:13 ]
Nylon66 PA66 Heat Stabilized Description Heat stabilized nylon PA66 a high temperature nylon made by the polycondensation of terephthalic acid and hexamethylene diamine. Heat stabilized nylon 6 has the properties of low water absorption, excellent heat resistance, good processing
Suzhou Anmei Material Technology Co., Ltd [2023-04-11 17:11:46 ]
Flame-retardant PA66FR is a halogen-free flame retardant engineering plastic made of nylon 66 resin as a base material (other fibers can also be added), mixed and extruded. Typical Application of Nylon66 PA66 Halogen-free FR(A2005X01) Anmei PA66 FR is filled with minerals and the
Suzhou Anmei Material Technology Co., Ltd [2023-04-11 17:11:20 ]
Nylon 66 is polyamide 66. The main purpose of Nylon 66 plastic modification is to improve the properties of Nylon 66 material based on the original resin properties to meet specific requirements. The chemical and physical properties of Nylon 66 PA 66 are very similar to Nylon 6,
Suzhou Anmei Material Technology Co., Ltd [2023-04-11 17:10:53 ]
Stone plastic composite, solid polymer core, or SPC flooring, is a vinyl flooring material with a rigid core made of powdery limestone, PVC, and stabilizers. Sometimes, you might see it referred to as a \"stone polymer composite floor.\" Wood SPC flooring is dense, spatially stab
Chongnuo (Shandong) New Material Co., Ltd [2023-04-07 14:01:31 ]
Hardwood Flooring End Cap Specification Product Name Flooring End Cap Specification 2400*35*8 mm Package Quantity 25 pcs/carton Installing Way glue/snap/staple Application corner edge, floor edge trim Gallery of wood floor end cap If you want to know more about end cap floor mold
Chongnuo (Shandong) New Material Co., Ltd [2023-04-07 14:01:05 ]
6mm SPC flooring are more advantageous in terms of durability and service life and have higher fire resistance, water resistance, and impact resistance. 6mm SPC is the first the choice for large supermarkets. Residential houses usually don\'t have high foot traffic, but rooms lik
Chongnuo (Shandong) New Material Co., Ltd [2023-04-07 14:00:38 ]
5mm non-slip spc flooring and a wear layer with a thickness of 0.3mm has the advantages of good stability, high peel strength, low walking noise, no warping, and environmental protection. It is better to use a wear layer with China 5mm spc floor. The backing or bottom may include
Chongnuo (Shandong) New Material Co., Ltd [2023-04-07 14:00:10 ]
The most obvious advantage of wholesale 4mm SPC flooring is its light weight. Under the condition of lightweight, it is very time-saving and labor-saving when handling or installing. The 4mm SPC vinyl flooring is the first choice of many customers at home and abroad. This is one
Chongnuo (Shandong) New Material Co., Ltd [2023-04-07 13:59:44 ]
SPC 3.5 mm vinyl flooring is the latest LVP luxury vinyl/luxury vinyl tile LVT flooring product. The main structure of the SPC floor 3.5mm is a UV coating layer, transparent wear-resistant layer, printing decorative layer, SPC vinyl base (SPC core), and cork or EVA base. SPC viny
Chongnuo (Shandong) New Material Co., Ltd [2023-04-07 13:59:11 ]
SPC Flooring SPC stands for stone plastic composite or stone polymer composite. The mainly material is limestone and PVC which makes the flooring so incredibly durable. Because the vinyl content, it has a certain flexible on stable basis. Chongnuo SPC flooring vinyl, enjoy your l
Chongnuo (Shandong) New Material Co., Ltd [2023-04-07 13:58:19 ]
Dental Denture MIM technology was first used to make some orthodontic appliances in medical treatment. These precision products have very small size, good biocompatibility and corrosion resistance. The main material used is 17-4PH stainless steel. At present, orthodontic brackets
KUNSHAN JINLONGYUAN NEW MATERIAL TECHNOLOGY CO.LTD [2023-03-21 10:15:28 ]
Railroad Clip Steel MIM stand for Metal Injection Molding China, it\'s a forming method of a metal parts and can provide a nearly unlimited shape, geometric-feature capability, high-production rates through the use of multi-cavity tooling. Compared with conventional technology li
KUNSHAN JINLONGYUAN NEW MATERIAL TECHNOLOGY CO.LTD [2023-03-21 10:14:26 ]